The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Fluke Lcr Meter of 2020 – Consumer Guide & Reviews

Rank No. #2
East Tester ET430 Handheld Digital LCR Meter Portable Capacitance Tester Multifunction Digital capacitance inductance Resistance Tester
  • 2.8-inch TFT display, 4-bit semi-display; Display digit: Main parameters: 5 bits, secondary parameters: 5 bits
  • Supporting DC Resistance and Electrolytic Capacitance Measurement; Automatic Recognition of Component Measurement; Support screening and deviation measurement;
  • USB communication interface; Large capacity lithium battery power supply; Support SCPI protocol;
  • Test frequency: 100Hz, 120Hz, 1KHz, 10KHz, 40kHz, 100KHz; Basic accuracy: 0.30%
  • Adjustable measuring speed, manual and automatic range; Short circuit correction with open circuit; Provide multiple test ports.
SaleRank No. #3
Fluke 87-V Digital Multimeter
  • Accurate frequency measurements on adjustable speed drives (ASD) due to Fluke-designed low-pass filter
  • Captures intermittents as fast as 250 µS with Peak Capture
  • Switchable high display resolution allows 6000 to 20,000 counts – lets you see small changes in displayed readings.CAT III 1000V, CAT IV 600V safety rated
  • Measure up to 1000 VAC and DC; Operating Altitude: 2000 m
SaleRank No. #4
Fluke 115 Compact True-RMS Digital Multimeter
  • True-rms for accurate measurements on non-linear loads
  • safety rated
  • Large white LED Backlight to work in poorly lit areas
  • Operating Temperature -10 °C to + 50 °C Storage Temperature -40 °C to + 60 °C
  • Check continuity, frequency, capacitance and diode test
Rank No. #5
Fluke 87V Digital Multimeter with a NIST-Traceable Calibration Certificate with Data
  • Your unit is calibrated prior to shipment with a new nist-traceable calibration certificate with data
  • The nist calibration provides you assurance your instrument meets manufacturer’s specifications. Your instrument is ready to use day one meeting most quality system standards
  • Measure up to 10 a, 20 a for up to 30 seconds
  • Selectable filter for accurate voltage
  • Input alerts provides audible warning against wrong use of input jacks
SaleRank No. #6
Fluke - Fluke-1587 FC Fluke 1587 FC 2-In-1 Insulation Multimeter
  • PI (polarity index) /DAR (dielectric absorption ratio) with Trend It graphs identifies problems faster
  • Memory storage through mobile Fluke Connect Measurements App eliminates writing down results, reduces errors and saves data for historical tracking over time
  • Temperature Compensation through App helps establish accurate baselines and relevant historical comparisons
  • VFD low pass filter for accurate motor drive measurements; Includes auto discharge of capacitive voltage for added user protection
  • Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
Rank No. #7
DE-5000 Handheld LCR Meter
  • This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp).
  • This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in “AUTO-LCR “ smart mode without selecting the function key.
  • Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz.
  • The "Sorting"mode could help the user to make a quick sort for a bunch of components.
  • Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included.
Rank No. #8
Hantek1832C Handeld 40kHz LCR Meter with Carry Case, 0.6Vrms
  • 100Hz/120Hz/400Hz/1kHz/4kHz/10kHz/40kHz test frequency, 0.6 Vrms test level, 0.30% accuracy
  • Primary L/C/R/Z, secondary X/D/Q/theta(P)/ESR
  • 4/2/1 times/s measuring rate, manual/auto measurement, 3/5 terminal test lead
  • Measurement range: 0-2000H(L), 0-20mF(C), 0-20M Omega(R); reset function: open/short circuit calibration; mode: series and parallel
  • 2.8" TFT HD LCD screen for dual display, long stand-by battery charged fully within 2 hrs
Rank No. #9
B&K Precision 880 100 kHz Handheld LCR Meter, Blue
  • 40,000 counts resolution on primary and 10,000 counts resolution on secondary display
  • L, C, R, and Z (879B & 880 only) primary measurements
  • Automatic calculation of secondary parameters D, Q, Theta, ESR (Theta/ESR for 879B &880 only), and DCR (880 only)
  • Accuracy up to 0.1% and selectable test frequencies up to 100 kHz (880 only)
  • Fast auto range design for rapid, easy component measurements
SaleRank No. #10
Fluke 374 FC 600A AC/DC TRMS Wireless Clamp Meter
  • Connect your meter to your smartphone with fluke connect measurements
  • Read measurements on your phone at a safe distance, wearing less ppe while your meter takes all the risks
  • Record results directly to your phone and the cloud
  • 600 A AC and DC current measurement and 2500 A AC current measurement with (optional) iflex flexible current probe
  • True RMS voltage and current for accurate measurements on non linear signals
SaleRank No. #11
Fluke 116/323 HVAC Multimeter and Clamp Meter Combo Kit
  • The fluke 116 digital multimeter features a built-in thermometer for HVAC applications
  • Fluke 116 digital multimeter features micro amps to test flame sensors
  • Fluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage
  • Fluke 323 true RMS clamp meter measures 400 A AC current and 600 VAC and DC voltage
  • Fluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on non linear signals
Rank No. #12
Proster LCR Meter LCR Multimeter Tester for Capacitance Resistance Inductance Measuring Meter with LCD Over-range Display
  • Proster LCR Meter: inductance, capacitance and resistance measuring meter,it is a Specialdigital instrument which is easy to be operated, the reading accuracydegree is higher with liquid crystal display 3 1/2.
  • High Accuracy : (Inductance) Measuring accuracy up to ±(2%+5); (Capacitance) Measuring accuracy up to ±(2%+5)Forward voltage drop of diode:Displaty forward voltage drop of diode;Forward voltage of DC:Approx.1mA;Reverse DC voltage:Approx.2.8V
  • Rotable LCD Display : Multi angle adjustment for easy reading.There is no need to hold tester while measuring, more convenient operation.
  • Multi-function: Auto power off; Data Hold function; Low Power Indication; ZERO ADJ for Capacitance.
  • New Version Test Leads: Comes with crocodile clip/ Test Loads/ mini Alligator Clip; The black pen is connected to the negative pole and the red test lead is connected to the positive pole
SaleRank No. #13
Fluke 376FC True-RMS Clamp Meter with iFlex
  • Connect your meter to your smartphone with fluke connect measurements
  • Read measurements on your phone at a safe distance, wearing less PPE while your meter takes all the risks
  • Record results directly to your phone and the cloud
  • Capture intermittent faults while performing other tasks using the logging capabilities of the Fluke 376 FC
  • Create and share reports from the field via email, or converse in real time with ShareLive video calls
SaleRank No. #14
Fluke 77-IV Digital Multimeter, Yellow
  • Large display; auto and manual ranging
  • Backlight for work in dim areas
  • Min/max to record signal fluctuations
  • Ergonomic overmolded housing with integrated probe holders
  • Free your hands with the optional TPAK magnetic hanger
Rank No. #15
LCR Research Pro1 Plus - 100KHz LCR Meter with 0.1% Accuracy/LED Tester/ESR Meter/Smart SMD Tweezers
  • Basic accuracy – R: 0.1%, L: 0.2%, C: 0.2% (see user manual for details)
  • 5 test frequencies – 100Hz, 120Hz, 1kHz, 10kHz, 100kHz with 3 test voltage - 0.2Vrms, 0.5Vrms, 1.0Vrms
  • Wide measurement range – R: 20mΩ to 10MΩ, C: 0.1pF to 10mF, L: 10nH to 1H
  • Additional diode and LED testing function
  • One year warranty, lifetime support
Rank No. #16
Benchtop LCR Meter Matrix MCR-5200 Digital Tester for Capacitance Resistance Inductance Accuracy 0.1% 40Hz-200kHz
  • ★【Test frequency】40Hz, 50Hz, 60Hz, 75Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz, 750Hz, 800Hz, 1kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz , 10kHz, 12kHz, 15kHz, 15.7kHz, 16.2kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz, 66.65kHz, 75kHz, 100kHz,120kHz, 150kHz, 200kHz, in total of 41 frequency points
  • ★【output resistance】30Ω , 100Ω two types of different signal source output resistance
  • ★【Basic measurment accuracy】 0.1%, built - in comparator
  • ★【test data saving function】U disk copy screen function, test data saving function, support FAT16 format, FAT32 file system,standard with RS232C, HANDLER
  • ★【Test Parameter】L,C, R, lZl, D, Q , X , ESR , θ(Deg),θ(Rad)
Rank No. #17
Siglent Technologies SDM3045X 4-1/2 Digit Digital Multimeter, DMM
  • Dual display. True RMS. Basic DC accuracy: 01 percent
  • Dcv/dci, acv/aci, 2/4 wire R, C, CONT, diode, freq, period, Temp
  • Built-in cold junction compensation for TC temperature measurements
  • USB host, USB device, LAN interfaces
  • Up to 150 readings/sec, statistics, graphs
Rank No. #18
Siglent Technologies SDM3055 5.5 Digit Digital Multimeter, White/Grey
  • Dual Display. True RMS
  • DCV/DCI, ACV/ACI, 2/4 Wire R, C, Cont, Diode, Freq, Period, Temp
  • Built-in Cold Junction Compensation for TC Temperature Measurements
  • USB Host, USB Device, LAN Interfaces
  • Up to 150 readings/sec, Statistics, Graphs
SaleRank No. #19
Fluke 1577 Insulation Multimeter, LCD Display, 600 Megaohm Resistance, 500/1000V Voltage
  • Manual and auto ranging digital insulation multi meter measures insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Insulation test voltages of 550V and 1000V and insulation measurement range of 0.1 to 600 megaohms
  • Live circuit detection prevents insulation test when voltages over 30V are detected
  • Safety ratings include Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010 1; ANSI/ISA S82.01 2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010 1:1002 and 61010.1 04, IEC61557 1; IEC61557 2; and IEC/EN 61010 1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
SaleRank No. #20
Fluke FLUKE-179-2/IMSK Industrial Multimeter Service Kit, 185 mm x 43 mm x 90 mm
  • Industrial thermometer combo kit
  • Full featured DMM with advanced electronic troubleshooting functions plus probes

Last update on 2022-01-07 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Fluke Lcr Meter for our consumer to review. The reports above show ratings of the best overal, best cheap Fluke Lcr Meter to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.