The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Fluke 1000V Megger of 2020 – Consumer Guide & Reviews

SaleRank No. #1
Fluke 1587/I400 FC 2-In-1 Insulation Multimeter With Clamp
  • Pl/DAR measurements with TrendIt graphs
  • Memory storage through Fluke Connect Measurements app. CAT III 1000 V / CAT IV 600 V overvoltage rating for added user protection
  • Temperature Compensation through Fluke Connect Measurements app
  • Fluke i400 AC Current Clamp Use with your Fluke 1587 FC to measure 1A AC to 400 A AC
  • 1 mA/Amp output guarantees easy reading
SaleRank No. #2
Fluke 1507 Digital Megohmmeter Insulation Resistance Tester
  • Repetitive or hard-to-reach testing is easy with the remote test probe
  • Live circuit detection prevents insulation test if voltage greater than 30-Volts is detected for added user protection
  • Read measurements easily with large, backlit display
  • Save both time and money with automatic calculation of polarization index and dielectric absorption ratio
  • Make repetitive tests simple and easy with the 1507's Compare (Pass/Fail) function
SaleRank No. #4
Fluke - Fluke-1587 FC Fluke 1587 FC 2-In-1 Insulation Multimeter
  • PI (polarity index) /DAR (dielectric absorption ratio) with Trend It graphs identifies problems faster
  • Memory storage through mobile Fluke Connect Measurements App eliminates writing down results, reduces errors and saves data for historical tracking over time
  • Temperature Compensation through App helps establish accurate baselines and relevant historical comparisons
  • VFD low pass filter for accurate motor drive measurements; Includes auto discharge of capacitive voltage for added user protection
  • Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V
SaleRank No. #5
Supco M500 Insulation Tester/Electronic Megohmmeter with Soft Carrying Case, 0 to 1000 megohms
  • Measure insulation values up to 1000 me ohms at 500 VAC
  • Zone scale to indicate insulation condition
  • Hand held
  • Test Leads store in case
  • Operates on 2 C batteries (not included)
SaleRank No. #6
Fluke T5-H5-1AC Kit 3-Pc 1000V Electrical Tester, Custom Holster and AC Voltage Detector Kit
  • 3 piece kit with a voltage, continuity, and current tester (fluke t5 1000); A non contact voltage detector (fluke 1AC II) and a holster
  • T5 1000 tester measures VAC and VDC with precise digital resolution
  • Range for T5 1000 tester is 1000 V RMS, with resistance displayed to 1000 and 937
  • 1AC II non-contact detector detects 90 to 1,000 VAC
  • T5 1000 tester has a safety rating of 1000V Category III, 600V Category IV rated; The Fluke 1AC II detector has a safety rating of 1000V Category IV
SaleRank No. #7
Fluke 1577 Insulation Multimeter, LCD Display, 600 Megaohm Resistance, 500/1000V Voltage
  • Manual and auto ranging digital insulation multi meter measures insulation resistance, current, voltage, and resistance for testing line insulation on motors, generators, cables, and switch gear
  • True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has an undistorted or distorted waveform
  • Insulation test voltages of 550V and 1000V and insulation measurement range of 0.1 to 600 megaohms
  • Live circuit detection prevents insulation test when voltages over 30V are detected
  • Safety ratings include Ingress Protection certified IP40; European Conformity (CE) marking; UL 61010 1; ANSI/ISA S82.01 2004; CAN/CSA C22.2 No. 1010.1:2004; IEC safety standards 61010 1:1002 and 61010.1 04, IEC61557 1; IEC61557 2; and IEC/EN 61010 1, 2nd edition for Category III installations up to 1000V and Category IV installations up to 600V, and Pollution Degree 2
Rank No. #8
HOLDPEAK HP-6688B Digital Insulation Resistance Tester with Voltage 5000V, Insulation Resistance 200G ohms with Data Hold and Backlight Megohm Meter (Battery Included)
  • 👉【Test voltage combinations】500V,1000V,2500V or 5000V;AC Voltage:750V.
  • 👉【Battery Included】Contain 6*1.5V (AA) Battery.Comes with a rechargeable function that lets you recycle your battery,Don't need to replace batteries frequently.
  • 👉【Insulation Resistance】1MΩ~200GΩ.A large range for you measure the insulation resistance.
  • 👉【Multi-Function】Strong anti-magnetic and anti-jamming function.With Auto Range,Data Hold,Low Battery Indication,Backlight,HV red indication lamp light,High voltage and short circuit input alarm.
  • 👉【Safety Protection】 IEC 61010-1 & CATIV 600V / CATIII 1000V overload protection on all ranges.HOLDPEAK come with 1 year warranty and lifetime technical support,if you have any problems with our product,pls feel free to contact us,we will respond to you within 24 hours.
SaleRank No. #9
Fluke 107 AC/DC Current Handheld Digital Multimeter by Fluke, Gray
  • Voltage, resistance, continuity, capacitance
  • Input terminal for AC and DC current measurements to 10 A and current
  • Backlit display
  • Data hold
  • Diode test, plus frequency and duty cycle measurements
SaleRank No. #10
Fluke T6-600 Electrical Tester
  • Measure voltage with or without test leads
  • Be safer: Measure voltage to 600V through the open fork, without test leads
  • Be faster: Not need to open covers or remove wire nuts simultaneously measure voltage and current
  • Be everywhere: 17.8 millimeter open fork is widest in the industry; Measure up to 200 A on 4/0 wires (120 millimeter2)
  • Field Sense technology for AC voltage, current and frequency measurement without making electrical contact to live voltage. Jaw opening: 0.7 inch
SaleRank No. #11
Fluke 1AC-A1-II VoltAlert Non-Contact Voltage Tester
  • Voltbeat technology and continuous self-test - so you always know it is working
  • Upon detection, tip glows and beeper sounds
  • CAT IV 1000 V for added protection
  • Range 90-volt to 1000-volt
  • 20-volt to 90-volt AC control circuit model also available
SaleRank No. #12
Fluke 1503 Insulation Resistance Tester
  • High voltage digital megohmmeter has preset and adjustable test voltages for measuring insulation resistance, and also measures leakage current to 2 milliamperes (mA) and capacitance to 20 microfarads
  • Measures voltage to 600V and signals when a voltage greater than 30V is detected
  • Automatically calculates PI and DAR for a detailed indication of insulation condition
  • Performs timed tests up to 99 minutes, and stores up to 99 test results which can be uploaded to a PC
  • Meets EN safety standards 61010 to 1 and 61557, and is rated for CAT IV installations to 600V and CAT III installations to 1,000V
SaleRank No. #13
Fluke 115 Compact True-RMS Digital Multimeter
  • True-rms for accurate measurements on non-linear loads
  • safety rated
  • Large white LED Backlight to work in poorly lit areas
  • Operating Temperature -10 °C to + 50 °C Storage Temperature -40 °C to + 60 °C
  • Check continuity, frequency, capacitance and diode test
Rank No. #14
Insulation Tester 50/100/250/500/1000V, Megohmmeter and Multimeter: 50k to 2G Insulation Resistance, DC/AC TRMS Voltage and Current, Resistance, Capacitance, Frequency, Temperature
  • Megohmmeter and Professional Multimeter combined into one Precision Instrument: Measure insulation resistance from 50kOhm to 2 Gigaohms with test voltages of 50V, 100V, 250V, 500V, or 1000V. The large backlit 5000 counts LCD display is easy to read and displays test voltage output and insulation resistance simultaneously. The meter is rated for 1000V CAT III installations.
  • With the eM870M you are not only getting an insulation tester but also a professional multimeter loaded with functions and features: Measures AC and DC voltage and current (True RMS for AC), Resistance, Continuity, Diode Test, Temperature (a thermocouple probe is included), Logic and Linear Frequencies, and even Capacitance.
  • This multimeter is powered by 6 AAA batteries. Auto-power off after 15 minutes to save battery life, but this feature can be disabled by the user. Autorange and Manual range, as well as Max, Min and Hold functions.
  • Package includes: one eM870M, two sets of test leads, alligator clips, one thermocouple probe, six AAA batteries, carrying case, and detailed user manual. 10-year Warranty.
Rank No. #15
Hioki IR4056-20 Multimeter Insulation Electrical Test Equipment - AC/DC
  • 5-range testing voltage 50 V/100 MO to 1000 V/4000 MO Stable & medium-speed digital readings, response time at PASS/ FAIL decision 0.8 second Drop proof onto concrete from 1m (3.28 feet) Bright LED luminous LCD, Test lead with bright LED lamp to illuminate near hand (Option L9788-11 or L9788-10) Continuity check via 200 mA testing Built in AC/DC voltage meter, useful for testing solar power generation systems and electric vehicles
SaleRank No. #16
AEMC 2126.53 Digital Megohmmeter, 1000V
  • True Megohmmeter
  • Insulation test voltage selections of 250V, 500V and 1000V
  • EST LOCK feature for timed measurements up to 15 minutes
  • Auto discharge after insulation test
  • AC/DC voltmeter to 600VAC/1000VDC
Rank No. #17
LEAGY VICTOR VC60B+ Digital Insulation Resistance Tester Megohm Meter DC250/500/1000V AC750V Orange with Black
  • Measure Range up to 2000MΩ 1000V with Accuracy of ±(4% of reading +2 digits)
  • Large LCD display (84.8*59.8mm), with backlight, max display "1999"
  • Data hold and auto power off
  • Over Range indication: display "1"
  • Low power consumption: Less than 300mw at unload measurement
SaleRank No. #18
KAIWEETS Soft Silicone Electrician Test Leads Kit CAT III 1000V & CAT IV 600V with Alligator Clips and Needle Probe for Fluke/AstroAI/INNOVA Multimeter Electronic Clamp Meter
  • SECURITY LEVEL AND HEAVY DUTY - It is safe to test CAT III 1000V &CAT IV 600V rated current 10A current, perfectly fits all kinds of multimeters like clamp meters, digital multimeters, table meters
  • UNIVERSAL COMPATIBLE - With three different connectors that can be replaced: alligator clips, needle probes and mini-hooks, makes the test leads can meet different test needs
  • HIGH-QUALITY MATERIAL - This test leads kit is made of silicone double insulated which is durable, non-toxic, environmentally friendly, will not be stiff after 24 hours in the refrigerator; with the 48" wire is perfect for any multimeter and clamp meter
  • WIRE CORE - Composed of 105pcs 0.001mm copper wires and nylon yarn give the test leads kit excellent Tensile strength and bending resistance, low resistance, electrical conductivity, it is good helper for electricians and electronic product repairers
  • QUALITY - We use high-quality materials ensures that the test leads are durable, flexible, and resistant to freezing and heat. It can withstand low temperatures of -68℉, won't become stiff during the winter. Please feel free to contact us if you have any concerns. We provide 36-Month after sale service
SaleRank No. #19
Fluke TL224 SureGrip Insulated Test Leads
  • DMM test leads (red, black) with safety shrouded, standard diameter banana plugs
  • Right angle connector on one end and straight connector on the other
  • Reinforced strain relief
  • 1.5 meter silicone insulated wire resists heat & cold
  • Cat iv 600 v, cat iii 1000 v, 10 a rating; UL listed
SaleRank No. #20
TestHelper KCH10 Magnetic and Hanger Strap Use for Multimeter Meter Hanging Kit
  • Magnet Hanger Kit Fit Fluke Multimeter well. such as 101 106 107 15B+ 17B+ 18B+ 12E+ 115 116 117 175 177 179 87V 28-II 27-II 287 289 FLUKE 50 II, 70 III, 80 IV, 180 series multimeters.

Last update on 2021-07-23 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Fluke 1000V Megger for our consumer to review. The reports above show ratings of the best overal, best cheap Fluke 1000V Megger to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.