The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Fj40 Fuel Line of 2020 – Consumer Guide & Reviews

Rank No. #1
LDR 516 F146 ¼ Inch ID Fuel Line for Small Engines 6-Foot Length
  • For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control
  • ¼ inch inside diameter (.64 CM) and ½ inch outside diameter (1.27)
  • Custom Extra long 6 Foot Length (1.82) can be cut to size for all your applications
  • For use in mowers tractors snow blowers dirt bikes and just about all small engines
  • American Made High Quality Rubber Hose Max 60 PSI @ 70 F Max Temperature of 257F/93C
Rank No. #2
Hipa (4 Size 4-Feet-Long Fuel Line Hose Tube I.D. x O.D. 3/32" x 3/16" 1/8" x 3/16" 1/8" x 1/4" .080" x .140" for Poulan Craftman Chainsaw String Trimmer Blower
  • Package include the following 4 different size fuel line hose
  • I.D. x O.D: .080" x .14", overall length: 4 feet
  • I.D. x O.D: 3/32" x 3/16", overall length: 4 feet
  • I.D. x O.D: 1/8" x 3/16", overall length: 4 feet
  • I.D. x O.D: 1/8" x 1/4", overall length: 4 feet
Rank No. #3
Ogrmar Fuel Line Assembly 3/8" Inner Dia 5/8" Outer Dia Hose Line Marine Outboard Boat Motor RVs Fuel Assembly with Primer Bulb Steel Hose Clamps 6FT
  • Universal Fuel Line - 3/8" (10mm)Hose with 6ft long line. Hose inner diameter: 3/8" (10mm), outer diameter: 5/8" (16mm).
  • Compatible with ethanol blended fuels, Engineered low permeation material prevents fuel evaporation, Suitable for Boats, RVs, Tractors, and Caravans.
  • Dual check valves allow priming in multiple orientations without restricting fuel flow.
  • Premium quality rubber bulb with rubber line hose, Stainless steel clamps.
  • Note: This is rubber product, please do not store this item under direct sunlight, high temperature or other rough environment.
Rank No. #4
CocoMocart 9.85-Foot Length Stretchy 1/4 Inch ID Fuel Line+20pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines
  • For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control.
  • Fuel line:1/4 inch inside diameter (0.64 CM) and 1/3 inch outside diameter (0.8CM);Hose Clamp for 1/4-inch and 3/16-inch Fuel Filter with an Inner Diameter of 2/5-inches
  • The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance;Custom Extra long 9.8 Foot Length (3M) can be cut to size for all your applications
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small engines
  • Package includes:9.8 Feet(3m) 1/4" ID Fuel Line,20 X 2/5" ID Hose Clamps
Rank No. #5
4LifetimeLines 25 ft 3/16 True Copper-Nickel Alloy Non-Magnetic Brake Line Replacement Tubing Coil and Fitting Kit, 16 Fittings Included, Inverted Flare, SAE Thread, 0.028 inch Wall Thickness
  • Nickel-copper alloy is very flexible making for super easy bending & flaring for installation - You can hand bend our brake lines with no bending tools needed
  • Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing. Copper Nickel lines are ideal for vehicles experiencing harsh weather and environmental conditions
  • Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market
  • We take pride in producing the best fuel, transmission and brake lines in the industry. Our Limited Lifetime warranty protects all of our products against defects for its entirety as long as it is installed correctly
  • Complete Brake Line Replacement Tubing Kit Assortment - Includes 16 Fittings: 2 x 3/16” (7/16-24) Inverted Tube Nut, 10 x 3/16” (3/8-24) Inverted Tube Nut, 2 x 3/16” (1/2-20) Inverted Tube Nut, 2 x 3/16” (9/16-18) Inverted Tube Nut
Rank No. #6
Hilitchi 20-Feet 4 Color Transparent Petrol Fuel Line Hose Lubricant of 4 Sizes Tubing for Weedeater Chainsaw Common 2 Cycle Small Engines
  • ★ High Quality Petrol Fuel Line Kit, Oil and Gas Resistant, Corrosion Resistant, Resists Swelling and Hardening, low temperature
  • ★ 4 Colors Representing 4 Sizes, More Convenient to Use, Color: Yellow Transparent, Blue Transparent, Colorless Transparent, Red Transparent
  • ★ 4 Sizes Different Diameter, Each Size Has 5 feet Length, Enough for Most Using
  • ★ Suitable for Chainsaws, Blowers, Pressure Washers, Weed Whackers and Trimmers and Many Other Gas Engine Machines Oil and Gas Resistant
  • ★ Warranty time: 6 months, 100% trust!!! - No compatible with greater than 10% ethanol fuel
SaleRank No. #7
Fuel Line Assembly, 3/8" Rubber Marine Outboard Boat Motor RVs Fuel Hose Line Assembly with Primer Pump Bulb Steel Hose Clamps 6FT (3/8"-Rubber)
  • Black Heavy Duty 6ft long 3/8" (inside diameter) fuel hose resists leaking and hardening. Meets EPA low permeation mandates.
  • Multi-layer low-permeation primer bulb, Suitable for Boats, RVs, Tractors, and Caravans Marine fuel line.
  • Fully compatible with Ethanol blended fuels.
  • Note: This is universal fuel line and as such do not come with engine or tank fittings.
  • Note: This is rubber product, please do not store this item under direct sunlight or other rough environment.
SaleRank No. #8
LDR Industries 516F385 5' Bag Fuel Line, 3/8"
  • Ideal for transfer of petroleum products fuel lines for small engines
  • Abrasion resistant
  • Use hose barbs and clamps
  • Convenient 5-Feet length
  • Made in USA GoodYear / Continental Hose
Rank No. #9
6 Feet 3 Sizes Fuel Line Hose with Snap in Primer Bulb, Primer Pouland Bulb, Fuel Filter Fit for Zama Poulan Weedeater Craftsman Trimmer Chainsaw Blower
  • 3 SIZES FUEL LINE-Size 1: ID= 0.08 inch, OD= 0.14 inch; Size 2: ID= 3/ 32 inch, OD= 3/ 16 inch; Size 3: ID= 1/ 8 inch, OD= 3/ 16 inch, Material: tygon, Oil and gas resistant,no compatible with greater than 10% ethanol fuel,resists swelling and hardening, include low temperature
  • 2PCS SNAP IN PRIMER BULBS-Replace manufacturer part number: 188-512, 188-512-1, fits for the carburetors of chainsaws, blowers, trimmers, that have the snap in primer assemblies, such as McCulloch, Craftsman, Poulan. Sears, Echo, Troy Bilt, Weed Eater, Ryobi, Ryan and many more. Size: height:31.4mm / 1.236inch, wide:21.4mm / 0.842inch
  • 2PCS FUEL FILTERS (530095646)- High quality replacement fuel filter, fit for Poulan Chainsaw 2050 2150 2375 Weedeater Craftsman Trimmer Chainsaw Blower # 530095646
  • 5PCS FUEL FILTERS (ZF-1)- Fits most Homelite chainsaws and trimmers with 1/8" I.D. fuel line etc, heavy-duty quality, durable and long lasting, easy to Install
  • 5PCS PRIMER POULAND BULB- Replace # zama 0057003 0057004 0058001, replace # hometile A01195A, oregon 49-028, replace Echo # 12538108660. Product Size£ºBulb height: 0. 75"(19mm) Bulb flange diameter: 0.85"(21.6mm) Bulb diameter: 0.725"(18.5mm)
Rank No. #10
HUZTL 20 Feet Petrol Fuel Line Hose Tube with 4 Sizes (5 feet Each) for Common 2 Cycle Small Engine Weedeater Chainsaw
  • Material: tygon, heavy-duty and durable to use
  • Corrosion resistant fuel line, also resist hardening and low temperature, No Metamorphose
  • Total 20 feet length including 4 sizes(5 feet each), satisfy most you need
  • No compatible with greater than 10% ethanol fuel
  • Apply Chainsaws, blowers, pressure washers, Weed Whackers and trimmers and many other 2 cycle gas engine machines
Rank No. #11
The Stop Shop 25 ft. Roll of Zinc Plated 5/16" Tubing - Fuel or Transmission
  • Zinc Plated for Corrosion Resistance
  • Great for making long lines without unions
SaleRank No. #12
Raider Polyurethane Fuel Gas Line Tubing Hose Roll Blue (5 Ft. x 1/4 In.)
  • Low temperature fuel line that is not affected by sub-zero temperatures
  • 100% polyurethane fuel hose
  • Available in 5’ rolls
  • Blue fuel tubing hose
  • Repair worn leaking fuel line
Rank No. #13
IZOKEE 1/4" Inch ID Fuel Line Set - 2 Meter / 6-Foot ¼ Inch Fuel Line + 2 Pcs 1/4 Inch & 5/16 Inch Fuel Filters + 10 Pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine
  • 【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line; 2 x 1/4" In-Line Fuel Filters; 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!
  • 【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.
  • 【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.
  • 【Hose Clamps】Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage.
  • 【Wide Application】Fits selected Briggs & Stratton, Kohler, Craftsman, Simpson, Kawasaki, Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that use this type filter for motorcycle, lawnmower, power equipment and small engines ect.
SaleRank No. #14
Dalom (4 Sizes 4 Feet Long Fuel Line Fuel Hose Fuel Tube for Poulan Homelite Craftman Chainsaw String Trimmer Chiansaw Blower
  • Specifictaions:I.D x O.D: 0.08" x 0.14" (2mm x 3.5mm), 1/8" x 1/4" (3mm x6mm),1/8" x 3/16"(3mm x5mm),3/32" x 3/16" (2.5mm x5mm)
  • Each line overall length: 4 feet .
  • Fits for Most 2 Cycle Small Engines
  • A perfect replacement fuel line set for chainsaws, blowers, weedeater whackers trimmers and other engine machines
  • Premium tygon material petrol fuel line - Oil and gas resistant, corrosion resistant.
Rank No. #15
HOOAI Fuel Line - 4X 6ft Fuel Hose Fuel Tube (4 Sizes) for Poulan Craftman Chainsaw String Trimmer Blower
  • 4 Different sizes on diameter - Each line is 6 feet long, I.D x O.D: 0.08" x 0.14" (2mm x 3.5mm), 1/8" x 1/4" (3mm x6mm), 1/8" x 3/16" (3mm x5mm), 3/32" x 3/16" (2.5mm x5mm)
  • Fits for MOST 2 Cycle Small Engines – A perfect replacement fuel line set for chainsaws, blowers, weedeater whackers trimmers and other engine machines.
  • Premium tygon material petrol fuel line - Oil and gas resistant, corrosion resistant. In low temperature environment, the fuel line still can maintain normal working conditions, instead of turning sresists swelling and hardening, include low temperature
  • NOTE : Not compatible with greater than 10% ethanol fuel
  • HOOAI locates within the states, we provide carefree return, and 90 days money back guarrantee! Lifetime warranty against manufacturer defect!
SaleRank No. #16
Apexstone 2pcs 300N/67LB 15inch Gas Spring/Prop/Strut/Shock/Lift Support with L-type Mounts
  • FORCE:67 Lbs/300 N(Per Strut),LENGTH(Center-to-Center):14.96 inch(380 mm),COMPRESSED LENGTH(Center-to-Center):9.06 inch(230 mm).Bracket Holes' Size: 8 mm(diameter),8 mm(diameter),10 mm X 8 mm(Length X Width).WORKING TEMPERATURE: -10 ℃ - 40 ℃/14℉-104℉
  • SET OF 2 IN THE PACKAGE:It could hold open 67 lb individually or together for around 134lb on any object such as car lid ,trailer,bed,RV under-bed storage, trap door etc.
  • INSTRUCTIONS&SCREWS NOT INCLUDED In the package,While you can feel free to Click "Ask Seller" Besides Your Order for In-time Assistance
  • HOW TO INSTALL&ADJUST IT:As the Upper Mounting Point ,it should be 4-5 inch,5.5 inch maximum towards the hinge on the lid.While If you want to adjust the Upper Mounting Point,just do as the Product Descripition shown ,or Click "Ask Seller" Besides Your Order for In-time Assistance
  • 100% SATISFACTORY WARRANTY: We offer 1 year 100% satisfactory warranty,if unfortunately our gas strut did not work well ,please kindly contact us for exchange, refund or return
Rank No. #17
Apexstone 100N/22.5lb Gas Strut,Gas Spring,Lid Support,Lift Support,Lid Stay,Gas Props/Shocks,Set of 4
  • Lids soft open gently,Ideal for supporting the lid to keep it open.NOT SOFT CLOSE!
  • Pressure:100N/22.5lb (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8"
  • Support opens lids to a maximum angle of 100 degrees.Available working temperature :-10℃~50℃/14℉-122℉
  • Package included: 4 X 100N 10 Inch Gas Strut and 20 X Screws
  • We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
SaleRank No. #18
Briggs & Stratton 25-Inch Fuel Line with 4 Clamps 5414K
  • Replaces Briggs & Stratton Service Part #283207 (Fuel Hose), and #95162S (Clamps)
  • Genuine Briggs & Stratton Part
Rank No. #19
SUPERFASTRACING Fuel Pressure Regulator 58 PSI /Filter EFI Swap LS w/ 6AN fittings Kit For C5 Corvette
  • ▶This is an OE style filter-regulator as used in the 1999-2004 C5 Corvette And 3/8" fuel filter feed-line fitting,3/8" male to -6AN straight filter fitting, 5/16" fuel filter return-line fitting.
  • ▶【Interchange Part Number】:GF822, 10299146, 19239926, 33737;TBSS intake, NNBS Intake, L92 Intake, returnless.
  • ▶【NOTE】:The C5 Filter/Regulator is capable of flowing a maximum of 255LPH.
  • ▶This fuel filter features an internal bypass that regulates fuel output pressure to 58psi (4 Bar).
  • ▶This filter/regulator assembly is commonly used when adapting return style fuel systems for use with returnless applications.
Rank No. #20
Briggs & Stratton 395051R 25-Foot Fuel Line Hose
  • Briggs & Stratton 395051R
  • Bulk 25-feet
  • 7/16-inch outer-diameter by 1/4-inch inner-diameter
  • Not for use in California. CARB compliant verison is Briggs & Stratton 792020

Last update on 2021-09-04 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Fj40 Fuel Line for our consumer to review. The reports above show ratings of the best overal, best cheap Fj40 Fuel Line to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.