The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Diy Magnetic Build Plate of 2020 – Consumer Guide & Reviews

Rank No. #1
Creality Ender 3 Pro 3D Printer with Magnetic Build Surface Plate and UL Certified Power Supply Metal DIY Printers 220x220x250MM Print Size
  • FAST HEATING & RESUME PRINT: The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • PRINTING STABILITY: Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly
  • REMOVE EASILY:Our all new magnetic bed surface for easy model removal is included stock on the Ender 3 Pro. Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
  • BRAND POWER SUPPLY:The brand power supply delivers more power with a stable output ensuring the temperature fluctuations are minimized, especially during long and intensive prints. Heat the hotbed faster and to higher temperatures before making the Ender 3 Pro a much better option for printing ABS and other high temperature high strength filaments.
  • OFFICIAL CREALITY 3D AMAZON STORE. All of our products come with a 18 Months limited replacement part and lifetime technical support.We provide original part for after sale.more than 20 engineers provide professional customer service.
Rank No. #2
Official Creality Ender 3 Pro 3D Printer with Magnetic Removable Build Surface Plate and UL Certified Power Supply, DIY FDM 3D Printer 220x220x250MM
  • Magnetic Removable Build Surface Plate- Easily remove the magnetic print surface from the hotbed and remove models after cooling with no spatula or razor necessary. Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface.
  • Safe Brand Power Supply-Ender 3 Pro comes with a UL Certified power supply which with a stable output ensuring the temperature fluctuations are minimized and protecting your printer from unexpected power surges. It can heat the hot bed to 110℃ in just 5 minutes.
  • Resume Print Function: This 3d printer has the ability to resume printing even after a power outage or lapse occurs.
  • Semi-Assembled Kit: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
  • WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.
Rank No. #3
3D Printer with Build Plate 150x150x150mm, FDM DIY Printers Black,Office 3D Printer,Assembled Flexible Magnetic Print Sheet and Micro SD Card Preloaded Sample PLA Filament Metal Frame 3D Printer
  • 1. Printing Size: 150*150*150mm. The heated build plate and wide range of extruder temperatures allow this printer to work with most types of 1.75mm 3D filaments.
  • 2. LCD Touch Screen: Touch screen interface, simply navigate through the easy to use touch screen to level the print bed, select the part you want to print, and let the printer transfer your designs into reality. This printer is easy to setup and easy to use. Online and offline performance to support you get your dream product.
  • 3. Outstanding Performance: This printer features a single extruder, which is capable of printing in PLA, ABS, Wood, Copper Fill, Steel Fill, Bronze Fill, and other materials. MicroSD card with preinstalled models, you can start printing easily after you received.
  • 4. All Metal Hotend for Stability: The all metal hotend is capable of superior performance and prevents wear and tear, while the heat brake design allows for efficient dissipation of heat. The sturdy metal base and side filament holder make it easy to use and change the filament.
  • 5. Removable Magnetic Build Plate: The easy to remove magnetic build plate makes the often times messy and difficult removal of prints simple and straightforward. Flexible magnetic print sheet, automatic calibration with wifi connected. You can print from a Windows or Mac PC using a USB connection or can print from 3D model files stored on a microSD card, without the need for a PC connection of any kind.
Rank No. #5
FYSETC 3D Printer Heated Bed Platform 200X200mm Flex Magnetic Bed Build Plate 2 in 1 with Adhesive Backing Build Surface for Maker Select Plus V2 Prusa i3 Vinci 1.0 Tarantula I3 Ultimate Printer
  • 3D Printer Heatbed Plate Sheet: can install on a hoted bed and glass platform, fit for 7.8"*7.8" Printer Bed.
  • 2 in 1 Plate: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed models, B plate with 3M adhesive, stick on the build surface.
  • Please Kindly Note: remove the printing after the build surface is become cooler, or the surface will developed a crack. the plate is magnetic, the temperature (recommended from 50 to 75 degrees centigrade) should not exceed 80 degrees. so It is work well for PLA, not suitable for ABS PETG filament, or the platform will comes bent . if set heated beyond 80 degree, it will lose magnetism or turn bent.
  • Come in 2 in 1, please adjust the distance between the nozzle and the A surface, or the nozzle will destroy the build surface.
  • What you get: 1 Pcs 7.8inch Magnetic build plate A+B
Rank No. #6
Official Ender 3 Pro 3D Printer with Magnetic Build Surface Plate and UL Certified Power Supply Metal DIY Printers
  • Ender 3 Pro comes with a high quality power supply,the heated bed can reach temperatures of 110℃ in just 5 minutes.Safely protected power supply and resume printing function, you can continue printing after the power is restored.
  • Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly.
  • MK10 Extrusion Mechanism:A brand-new patented infrastructure that effectively reduces the risk of plugging and poor spillage.
  • Employs new magnetic self-adhesive platform sticker rather than traditional masking tape and glue for easy model picking-up,excellent adhesion and less printing cost.
  • Simple Leveling Method: Larger Hand-turn Nut, Ergonomic Design, Enabling To Level the Platform More Quickly.
Rank No. #7
UKCOCO Magnetic Print Bed Tape Round Bubble-Free Flexible Print Sticker Build Plate Tape Plate DIY 3D Printer Parts - 200mm (Black)
  • Allows for quick application of a bubble-free surface
  • No warped edge. No glue is needed
  • Can be installed on a hot bed and a glass platform
  • Flexible, frosted and magnetic, it is easy to move away from build platform and take away printed models. No residue left behind.
  • Size: 20x20x0.3cm
Rank No. #8
FYSETC MK52 Magnetic Platform 3D Printer Heat Bed Double Sided Textured Pei Spring Powder Coated Steel Sheet Build Plate for Reprap Prusa i3 MK3 MK2.5
  • Newly upgraded MK52 magnetic platform compatible with prusa mk2.5S,prusa mk3/3S
  • Size: 254*241mm/ 10*9.48 inch.
  • Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming
  • Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc. Make it possible to add inductive Z-probe and add ABL for some low-cost printers
  • After-sales Guarantee: each one defective item can have the free replace or refund, If need further please fell free to email or Q&A us, we and our engineers are very happy to assist you.
Rank No. #9
FYSETC Flexible Build System 300x250mm/ 11.8x9.8 inch 3 in 1 Spring Steel Build Plate with PEI Printing Surface+Magnetic Base with Adhesive for Qidi X-Max Printer Accessories
  • A must upgrade parts for your Qidi X-Max Printer, or DIY your own printer.
  • PEI with high temp adhesive: Custom designed PEI materials to make your print easy to adhere to the printing surface, flexible, removable. Kindly Tips: We have helped you stick PEI on the steel plate, use machine, so you no longer need to worry about bubbles.
  • PEI compatible with all most filament, include PLA/ Carbon PETG ABS/ TPU/ Wood etc.
  • Magnetic Base: high temp-resistant with high temp adhesive, easy installation and easy to remove. You also can cut it for any size.
  • Steel Spring Material: steel, thickness about 0.5mm, positive and negative side can be reused.
Rank No. #10
FYSETC 3D Printing Build Surface Double Sided Textured PEI Spring Powder Coated Steel Sheet Flexiable Build Plate 8.7 x 8.7 inch/ 220x220mm for Anet A8 Maker Select Plus Wanhao Tronxy xy-2 P802M
  • Compatible with Maker Select Plus, Anet A8, Wanhao, Geeetech A10, Tevo Tornado etc.
  • Size: 220*220mm/ 8.7*8.7 inch
  • Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming
  • Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc. Make it possible to add inductive Z-probe and add ABL for some printers need to be upgraded
  • After-sales Guarantee: each one defective item can have free replace or refund, If need further please feel free to email or Q&A us, we and our engineers are very happy to assist you.
Rank No. #11
FYSETC 3D Printing Build Surface Double Sided Textured Pei Spring Powder Coated Steel Sheet Flexiable Build Plate 300mm x 300mm for 3D Printer CR10 CR10-S Lulzbot TAZ 6
  • Compatible with CR10, CR10-S and 3D printer with build surface of 300mm x 300mm
  • Size: 300mm x 300mm
  • Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming
  • Easy to install, the model can be easily removed by bending or popping, and a wide range of material compatibility, such as PLA, ABS, PETG, TPU, PUA, etc. It is possible to add inductive Z probes and add ABL printers for certain objects that need to be upgraded
  • After-sales Guarantee: each one defective item can have free replace or refund, If need further please fell free to email or Q&A us, we and our engineers are very happy to assist you.
Rank No. #12
Ender 3 Build Surface, 3D Printer Heated Bed Cover 3D Printer Build Surface Platform for Ender 3/3X/3 Pro/5/Pro,Anet A8, 9.25“x9.25”(235x235mm) Square for 3D Printer DIY (Pack of 4)
  • 【PACK of 4】Our Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro Replacement 3D Printer build surfaces are 9.25" x 9.25" (235mm x 235mm) square, fully matches heated bed on many popular 3D printers,and also can cut to any small size you want.
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production.
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry.
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.
  • 【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer a 90 day money back guarantee!
Rank No. #13
Icstation Mini Desktop 3D Printer, Entry Level Integrated FDM 3D Printer with 1.75mm PLA Filament, Fully Assembled, TF Card, Removable Magnetic Build Plate, for Teens DIY STEM Projects
  • START PRINTING IN 30s: The printer comes fully assembled. Quick set up with the attached step-by-step installation guide. Easy to start your printing in 30 seconds. (Remove the protective clip on the z-axis before use)
  • ONLINE PRINTING: This desktop 3D printer supports online printing with a laptop and PC. It also comes with a card reader and an SD card in which contains more than 100 models. Beginners can quickly start their creative trip with those built-in models. How to set on Cura:https://drive.google.com/drive/folders/1qZ0Xf13FsYkYS1lMxbbGCwJI85z60OLk?usp=sharing
  • COMPACT BODY DESIGN: This 3D printer is compact enough for office/classroom/studio desk. 19.5*19*27cm body won't take up much space on your workbench and easy to carry. Print your idea as soon as you feel inspired!
  • HIGH-QUALITY: Axis position accuracy is 0.1mm (X. Y. Z). 110 x 110 x 120mm printing size allows you to have enough space to make your ideas come true with ultra-fine details.
  • SAFE AND SECURE: With FCC CE ROHS certification, this affordable 3D printer comes with a roll of 200g PLA filament. PLA filament doesn’t release toxic gases to give children a healthier environment.
Rank No. #14
Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm
  • REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
  • RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
  • SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics.
  • WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service.
Rank No. #15
Parco Scientific P1007-HS Digital Hotplate Magnetic Stirrer w/Ambient - 380°C Temperature Range, 6.5" x 6.5" Ceramic Coated Plate, LCD Display, and 2 Magnetic Stir Bars, 200-1500 RPM
  • Motor type: Brushless motor
  • Speed range [RPM]: 200-1500
  • Speed and temperature LCD display
  • Temperature display accuracy: 0.1°C
  • Plate material: Material Ceramic coating surface/Stainless steel
SaleRank No. #16
PicassoTiles 100 Piece Set 100pcs Magnet Building Tiles Clear Magnetic 3D Building Blocks Construction Playboards, Creativity beyond Imagination, Inspirational, Recreational, Educational Conventional
  • DREAM BIG & BUILD BIG - No limitations, scalable to build as big as desired by adding more pieces to create the master piece. PicassoTiles in colossal styles.
  • LEARNING BY PLAYING - Never too early to start developing kids creativity. Children can acquire strong sense of color, geometrical shapes including 3D forms numbers counts, magnetic polarities & architectural design at early age.
  • BONDING BY PLAYING - Entertaining for single or multiple parties and feel the sense of achievement together. Suitable for all ages (3+ and up) by one party of in groups a great way to spend quality time with the family and love ones.
  • LEARNING IS FUN - Encourage creativity which is the key factor to success in today's ever-changing environments. Fun and entertaining, perfect educational presents for school age children that will never go out of style.
  • CREATIVITY BEYOND IMAGINATION - Magnet Building Tiles Clear 3D color Magnetic Building Blocks Playboards for preschool, pretend play and more. Easy to construct and easy to put away for storage.
SaleRank No. #17
3D Printer, Creality Ender 3 Pro 3D Printer Kit with Resume Function, Cmagnet Build Plate and Upgraded Power Supply, Compatible with PLA TPU 1.75mm Filament, 220x220x250mm Printing Size
  • DIY ASSEMBLY: Enjoy the satisfaction of completing the assembly of 3d printer kit and better understanding the principles of the inside of machine. Also a great way for parents and children to spend quality time together! First choice for Christmas!
  • SUPERIOR PRINTING SURFACE: Our "C-MAG" magnetic mat adheres better to the platform than traditional texture glue plate or paper surface, making it easier to remove the models. The maximum printing size is 220 x 220 x 250 mm, meeting your more printing needs!
  • NEW Y-AXIS DESIGN: Designed with sturdier 40x40mm Y-axis, which not only improves excellent stability and printing quality but also helps to reduce the noise level. What's more, it can resume printing after suffering unexpected power outages!
  • MORE FEATURES: Easy manual leveling set, upgraded Mk-10 extruder, quick heating to reach 110℃ in needs 5 minutes, Meanwell certified power supply & more, compatible with PLA TPU 1.75mm filament. Modular design, faster assembly!
  • 100% SATISFACTION: This 3d printer is a semi-assembled kit, a best creative gift for kids, an entertaining STEM educational experience in engineering and electronics. Each printer was tested before shipping. If you have any questions, feel free to contact us.
Rank No. #18
Winice 3D Printer M08 with Resume Print, Removable Build Surface Plate, Metal Frame FDM DIY Printers 3D 250x250x270mm (Black)
  • ✍ALL METAL FRAME: This all metal frame provides a sturdy base meant to last for years. Plays an important role in the accuracy of 3D printing. It makes Winice 3D printer more stable and high-precision.
  • ✍RESUME PRINTING FUNCTION: Winice 3D printer can automatically memorize the printing progress and resume printing after power outage or any other unexpected stoppage. The function of intelligent alarm for material shortage avoids time and resource waste.
  • ✍FAST HEATING: Only needs 5 minutes for hot bed to reach operating temperature. Shortening the heating time, meeting the needs of fast printing.
  • ✍LARGE PRINTING SIZE: Support print size 250 x 250 x 270mm, the same price, larger print size to meet your more printing needs and enjoy more printing fun.
  • ✍MAGNETIC HOT BED STICK: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
Rank No. #19
Apera Instruments AI2801 Powerful Magnetic Lab Stirrer / Stir Plate, Speed Range: 0-2300 rpm, Max Stirring Capacity: 3000ml
  • An economical choice of a reliable and durable magnetic stirrer
  • Ideal for home brew yeast starters
  • Small, yet powerful stirring ability with a Max. 3000ml stirring capacity
  • Smooth speed control (0-2300 rpm)
  • Two-Year
Rank No. #20
Official Creality Ender 3 Pro 3D Printer with Glass Plate, Upgrade Cmagnet Build Surface Plate and UL Certified Meanwell Power Supply Build Volume 220x220x250mm
  • Upgraded Version: It comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
  • MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
  • Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
  • Resume Printing Function: Shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
  • What You Get: Ceality Ender 3 Pro 3D pinrter, Glass plate, lifetime technical assistance and 24 hours professional customer service.

Last update on 2020-11-04 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Diy Magnetic Build Plate for our consumer to review. The reports above show ratings of the best overal, best cheap Diy Magnetic Build Plate to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.