The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Creality Cr 10 Heated Bed Upgrade of 2020 – Consumer Guide & Reviews

Rank No. #1
Creality 3D CR-10/ CR-10S Tempered Glass Bed New Upgrade Heated Bed Built Platform Plate for CR-10/CR-10S 310x 310x 4mm
  • [Experience Pro-hesion] Our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand.
  • [Easy Remove Prints] Reduce adhesion after cooling. It is easy to separate the model and the platform and remove the model. The special coating is inorganic and has a hardness of 8 Mohs. Scratch proof and dust proof.
  • [Easy Operation] This CR-10 bed plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Tempered Glass provides ultra flat and smooth surface for a flawless printing.
  • [Suit For] Creality original upgraded glass bed for CR-10 and CR-10S 100%.Not suit to CR-10SPro/10spro V2
  • [Use Attention] Do not rub with organic solvents when cleaning, such as alcohol, acetone, etc., wipe with water; do not scratch or scratch the surface with sharp objects or sandpaper, they will destroy the surface coating. You can take it off slowly with a spatula. This is the official Creality 3D store. All products have been tested extensively with all Creality brand products to insure increases in quality and no sacrifice in safety or performance.
Rank No. #2
CHPOWER for Creality CR-10 Bed Surface, CR-10S Ultra-Flexible Removable Magnetic Build Surface 3D Printer Heated Bed Cover, 310x310mm
  • EASY REMOVAL OF PRINTS: CR-10 upgrade parts, simply prints on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible.
  • SIZE: 300x300mm magnetic bed. Suitable for all FDM printer models, and all heated and non-heated 3D printer beds.
  • DURABILITY & EASY CLEAN: CR-10 bed surface is capable to work at 70ºC. Easy clean with alcohol.
  • SIMPLE INSTALLATION: This CR-10 plate comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
  • MORE FLAT FOR PRECISION: Super Flatness. Prevent warping. Fast and uniform heating. More precise on printing, especially the bottom of the prints.
Rank No. #3
Creality Ultra-Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for CR-10/CR-10S 3D Printer 310X310MM
  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design
  • EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate
  • UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.
Rank No. #4
CHPOWER for Creality 3D CR-10/ CR-10S Heated Bed, Tempered Glass Plate Build Surface 310x 310x 4mm
  • ✅Do not rub with organic solvents when cleaning, such as alcohol, acetone, etc., wipe with water; do not scratch or scratch the surface with sharp objects or sandpaper, they will destroy the surface coating. You can take it off slowly with a spatula.
  • ✅ EASY REMOVAL OF PRINTS - Reduce adhesion after cooling. It is easy to separate the model and the platform and remove the model. The special coating is inorganic and has a hardness of 8 Mohs. Scratch proof and dust proof.
  • ✅Experience Pro-hesion- Our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand.
  • ✅This cr-10s bed plate can be placed on top of any existing hotbed surface and be held in place with simple clips. Tempered Glass provides ultra flat and smooth surface for a flawless printing.
  • ✅CHPOWER is a TRUSTED VENDOR. Buy with confidence.
Rank No. #5
Authentic Creality CR-10S Pro, CR-X, CR-10 V2 and Ender-3 Max Tempered Glass Bed Build Plate 310mmx320mmx4mm Printing Surface with Advanced Adhesion Technology and Tool-Less Removal
  • Advanced Adhesion - This glass bed comes coated in a carbon silicone layer that improves adhesion while using the hotbed. The textured surface grips plastics when heated and reduces warping on many parts with large surface areas.
  • Tool Free Removal - Once the print is finished, simply wait for the bed to cool to room temperature and the finished print will pop off of the carbon-silicone proprietary glass surface with minimal effort. No need for spatulas or scraper tools to pry the model from the bed and no more breaking delicate models which adhere too tightly to the build surface. As the temperature cools, micro-changes in the crystalline structure allow the surface to completely release the model for pain free removal.
  • Universal - This glass bed is well suited for all types of filament including: PLA, ABS, PETG, Nylon, TPU, Polycarbonate, wood and more. This tempered glass bed can sustain temperatures up to 115*C and higher, making it ideal for filaments with high shrinkage coefficients that require high temperatures to prevent warping.
  • CR-10S Pro, CR-X, CR-10 V2 and Ender-3 Max Upgrade - This glass bed is sized for the CR-10S Pro and CR-X 3D printers from Creality 3D. Much easier to use and more effective than the stock Aluminum bed that comes with the CR-10S Pro.
Rank No. #7
Creality 3D Open Source CR-10 3D Printer All Metal Frame 12x12x15.5 Inch Build Volume and Heated Bed Includes Glass Bed (Black)
  • EXTRA LARGE: This printer comes with one of the largest build spaces available. At 12inx12inx15.5in, you can print models that 90% of other printers could not. The unique Bowden extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.
  • OPEN SOURCE: In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.
  • HIGH QUALITY: This all aluminum frame provides a sturdy base meant to last for years. The POM engineering thermo-plastic "Triangle-Slot" wheels provide excellent dimensional stability even during extended use. Elimination of metal-on-metal steel rods cuts noise down dramatically.
  • GLASS BED: This printer comes stock with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. An absolute necessity when dealing with such a large build space, print from corner to corner and get perfect layer lines every time.
  • WARRANTY: Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers replacement part. If you are not satisfied with the results of your prints, contact us and we will work with you to provide assistance until you are printing like a pro!
Rank No. #9
Creality Original 3D Printer Parts 8mm OD 25mm Length Compression Mould Die Springs Light Load for Heated Bed Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/CR-10 CR-10Mini CR-10S 3D Printer (Pack of 10)
  • Compatibility: compatible with most 3D Printer Bed, great for Creality CR-10 10S S4 Ender 3 Heatbed Springs Bottom Connect Leveling
  • Advantage: the die springs are stiffer than ordinary spring, which help your 3D printer much more stable while printing
  • Size: hole diameter (OD): 0.31"/ 8mm; rod diameter (ID): 0.16"/ 4mm; length: 0.98"/ 25mm
  • Package Included: 10 PCS Spring
  • If you have any question or problem,please feel free to contact us
Rank No. #10
WitBot Heated Bed Spring for 3D Printer Creality CR-10 10S S4 Ender 3 Heatbed Springs Bottom Connect Leveling Length 25mm OD 8mm ID 4mm for 3D Printer Part.(10 pcs)
  • 1.Size:Outside diameter:8mm Inside diameter:4mm Length :23mm.
  • 2.Material:Metal. Metal springs are harder than regular springs, which helps your 3D printer to be more stable when printing.
  • 3.Compatibility: compatible with most 3D Printer Bed, great for Creality CR-10 10S S4 Ender 3 Heat bed Springs Bottom Connect Leveling.
  • 4.Heated bed:Suitable for MK2B MK2A MK3 so on.
  • Uses: multiple uses
Rank No. #11
3D Printer Thermistor NTC 100K ohm 5pcs for mk7 mk8 Nozzle and Heated Bed for Creality CR-10 CR-10S Ender 3 Eewolf
  • Use for 3d printer heated bed or extruder nozzle
  • Package include: 5pcs thermistors
  • Temperature sensor 100KΩ accuracy of ± 1%
  • Wire length: 1m/39.4 inches
  • It has 2 pin XH2.54 female connector
Rank No. #12
Creality Original CR-10 V2 Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for CR-10 V3 / CR-10S Pro V2 / CR-10S Pro/CR-10S / CR-X/Ender 3 Max 320 x 310mm
  • EASY REMOVAL OF PRINTS: Upgrade part, simply prints on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible.
  • DURABILITY: The bed surface is capable to work at 70℃.
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
  • SIZE: 320x310mm magnetic bed. Suitable for all FDM printer models, and all heated and non-heated 3D printer beds.
Rank No. #13
Upgraded 4PCS Creality Aluminum Hand Twist Leveling Nut with 4PCS Hot Bed Die Springs for Ender 3/3 Pro/3 V2, Ender 5/5 Plus/Pro, CR-10, CR10S/10S Pro, CR 20 3D Printer
  • Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 V2/3 Max, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 V3,CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR 10S Pro V2, CR-10 Plus, CR-X, CR 20.
  • Last Over Years. Made by high quality aluminum, last much longer your stock plastic nuts.
  • Metal nut is more powerful and will twist more tightly than plastic nuts.
  • The torque of these nuts is large, making it easier to fine tune the hot bed.
  • Package includes 4Pcs Red Aluminum Screw Nut + 4Pcs Yellow Die Spring. NOTE: The springs are around 25mm long, which is longer than ender 3,ender 3 pro and ender 3 v2 printer springs. You can use a tool to cut it to be shorter if you really like this product or adjust the hot bed to be higher to fit the springs.
SaleRank No. #14
Dawnblade Creality Ender 3 Glass Bed Upgraded, 235x235x4mm
  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing.
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature.
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer.
Rank No. #15
Aluminum Hand Twist Leveling Nut and Hot Bed Die Springs Printer Compression Springs Compatible with 3/3 Pro, Ender 5/5 Plus/Pro, CR-10, CR10S/10S Pro, CR 20 3D Printer (8 Pieces)
  • Package include: package comes with 4 pieces aluminum hand twist level nuts and 4 pieces yellow die spring, bright colors make you work happily
  • Upgraded design: made of aluminium alloy, rust and corrosion resistance, metal nut is more powerful and will twist more tightly than plastic nuts, long service life
  • Size: the twist level nut is approx. 2.36 inch/ 60 mm in diameter and 0.35 inch/ 9 mm in thickness, the torque of these nuts is large, making it easier to fine tune the hot bed
  • Suit for: apply for 3D printer hot bed/ platform, the red nuts are original upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 plus/ 5 pro, CR-10, CR-10 V2, CR-10 max, CR 10, CR-10 mini, CR-10S, CR 10S Pro, CR-10 plus, CR-X, CR 20
  • Easy to use: convenient installation, easy to level, It does not occupy any effective molding space of your printer
Rank No. #16
CR-10 Spring Steel PEI Bed Plate,Heat Resistance, Removable,Flexible,Magnetic Build Surface, with 310mm×310mm,Upgrade Replacemnt Parts for Creality CR-10,CR-10S,Ender 3 MAX
  • Flexible, removable, can stick to magnetics very well. High strength and heat resistance. Suitable for Creality CR-10,CR-10S,Ender 3 MAX.
  • The flexible steel PEI sheet is made of high quality spring steel that won't kink or warp when you flex them, they just return back to shape!
  • No more tape, no more glue, no more shovel, and release your printing anxiety.
  • Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.
  • When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
Rank No. #17
Creality CR10 Heat Bed 12V Aluminum Heat Bed with Cable and Insulation Mat Installed Well Compatible for 3D Printers Creality CR10 / CR10S Hot Bed Size 310x310x3mm
  • Upgraded 2018 Which Heating Much Faster and with 12V Voltage 18A 220W
  • Original Parts / Accessories Replacement for Creality 3D Printer CR-10 / CR-10S
  • Hot Bed Size:310x310x3mm,Hotbed With Cable Which be Installed Well.
  • We only guarantee our heater bed be used on the original creality 3D printer CR-10 and CR-10S; if be used to the other brand modles, customers need to afford to the resonsibility by themselves, meanwhile, our warranty will not valid for this cause.
  • WARRANTY: All 3D printer accessories with 12 Months Warranty and Lifetime Technical Support.
Rank No. #18
3D Parts Heater Bed of Ender 3 / Ender 3 Pro 3D Printer Replacement Parts Aluminum MK3 Heatbed Hotbed Platform with Heated Bed Cable Line for Ender 3 V2/ Ender-3 /Ender 3 Pro
  • Ender 3 Replacement Heater Bed DC 24V 220W with Cable Installed for Creality 3D Printer Ender 3/Ender 3 Pro / Ender 3X
  • Original 3D Printer Ender 3 Replacement Parts / 3D Printer Accessories for Ender 3 / Ender 3 Pro / Ender 3X
  • Size of Ender 3 Hot Bed: 235x235x3mm
  • Ender 3 Pro Hotbed with Cable Which be Installed Well. Build Surface with 3M Adhesive which easily to stick on the heater bed platform.
  • 3D Printer Ender 3 Replacement Heater Bed with Free Technical Support.
SaleRank No. #19
Creality CR-10 V2 Glass Bed 3D Printer Platform, 310 x 320MM Tempered Glass Plate Build Surface for CR-10S Pro V2 / CR-10S Pro/CR-10S / CR-X/Ender 3 Max
  • Very easy to take off the model, no tools needed. The borosilicate glass bed could be fixed with middle sized clips.
  • Creality glass bed provides stronger adhesion when removing models.
  • This borosilicate glass bed could be fixed with middle sized clips.
  • The Glass Plate is applicable with Creality Creality 310 x 320 Glass Bed, 3D Printer Platform Tempered Glass Plate Build Surface for CR-10 V2 / CR-10S Pro / CR-10S / CR-X 3D printer.
  • Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
Rank No. #20
Creality Original Ultra-Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for CR-10 V2/V3/Ender 3 Max/CR-10 CR-10S 3D Printer 12x12 Inches
  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design
  • EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate
  • UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.

Last update on 2021-09-09 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Creality Cr 10 Heated Bed Upgrade for our consumer to review. The reports above show ratings of the best overal, best cheap Creality Cr 10 Heated Bed Upgrade to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.