The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Cr125 Cylinder Sleeve of 2020 – Consumer Guide & Reviews

Rank No. #1
LA Sleeve Cylinder Sleeve Standard Bore for 93-95 Honda CR125
  • Cylinder sleeve made from chrome-moly alloy.
  • Outside diameter precision centerless ground.
  • Ports cut to precision dimensions and shapes for ease of installation and port match-up.
  • Note: Inside diameter must be bored and honed to size pistons after installation.
SaleRank No. #2
LA Sleeve Cylinder Sleeve Standard Bore for 96-99 Honda CR125
  • Cylinder sleeve made from chrome-moly alloy.
  • Outside diameter precision centerless ground.
  • Ports cut to precision dimensions and shapes for ease of installation and port match-up.
  • Note: Inside diameter must be bored and honed to size pistons after installation.
Rank No. #4
LA Sleeve Cylinder Sleeve Standard Bore for 02 Honda CR125
  • Cylinder sleeve made from chrome-moly alloy.
  • Outside diameter precision centerless ground.
  • Ports cut to precision dimensions and shapes for ease of installation and port match-up.
  • Note: Inside diameter must be bored and honed to size pistons after installation.
Rank No. #5
LA Sleeve Cylinder Sleeve Standard Bore for 05-07 Honda CR125
  • Cylinder sleeve made from chrome-moly alloy.
  • Outside diameter precision centerless ground.
  • Ports cut to precision dimensions and shapes for ease of installation and port match-up.
  • Note: Inside diameter must be bored and honed to size pistons after installation.
Rank No. #6
LA Sleeve Cylinder Sleeve Standard Bore for 00 Honda CR125
  • Cylinder sleeve made from chrome-moly alloy.
  • Outside diameter precision centerless ground.
  • Ports cut to precision dimensions and shapes for ease of installation and port match-up.
  • Note: Inside diameter must be bored and honed to size pistons after installation.
Rank No. #7
LA Sleeve Cylinder Sleeve Standard Bore for 01 Honda CR125
  • Cylinder sleeve made from chrome-moly alloy.
  • Outside diameter precision centerless ground.
  • Ports cut to precision dimensions and shapes for ease of installation and port match-up.
  • Note: Inside diameter must be bored and honed to size pistons after installation.
Rank No. #8
VintCo Cylinder Sleeve 56mm for Honda CR125 1975-78
  • Made For VintCo By Advanced Sleeve Piston Part # PSH01-00 Bore 56mm
  • Height 111.9mm OD 62mm
  • Flange OD 64.7mm Flange Height 5.1mm
  • Wall Thickness 3.6mm
  • Intake 25.4mm Exhaust Port Location 27mm
Rank No. #9
VintCo Cylinder Sleeve 55mm for Husqvarna CR125 WR125 1972-73 SC125 1974
  • Made For VintCo By Advanced Sleeve Piston Part # PSU06-00
  • Bore 55mm Height 106.8mm
  • OD 65.2mm Flange OD 72.1mm
  • Flange Height 7.5mm Wall Thickness 5.6mm
  • Intake 20.7mm Exhaust Port Location 30.4mm
Rank No. #11
TOP NOTCH PARTS 440cc BIG BORE CYLINDER PISTON RINGS TOP END KIT FITS HONDA TRX400EX TRX 400EX 99 00 01 02 03 04 05 06 07 08
  • REPLACES OEM NUMBER 12100-KCY-670 12191-KCY-672 13011-KCY-670 13101-KCY-670 90601-KA5-000 13111-KCY-670 12251-HN1-003 12391-KCY-671 14560-KCW-851
  • HONDA TRX 400EX 440cc BIG BORE CYLINDER PISTON TOP END KIT
  • PISTON TOP HAS A CERAMIC COATING PROVIDING SUPERIOR HEAT RESISTANCE WHICH WILL EXTEND THE LIFE SPAN OF THE PISTON. * THIS IS THE BEST QUALITY KIT ON EBAY! EQUAL TO OR BETTER THAN OEM
  • PURCHASE INCLUDES: 1X CYLINDER 1X PISTON. 1X PISTON PIN. 2X CIRCLIPS. 1X COMPLETE SET OF RINGS. 1X HEAD GASKET. 1X BASE GASKET. 1X HEAD COVER GASKET. 1X CHAIN TENSIONER GASKET. 1X GASKET MAKER. 1X THREAD LOCK. 1X FUEL FILTER. 1X OIL FILTER. 1X FREE NGK SPARK PLUG
  • PARTS FIT: 1999 - 2008 HONDA TRX 400EX.
Rank No. #12
Sense Energy Monitor – Track Electricity Usage in Real Time and Save Money – Meets Rigorous ETL/Intertek Safety Standards
  • SENSE SAVES: Sense saves you energy and money by providing insight into your home's energy use and activity. NOW SUPPORTING TIME-OF-USE RATE PLANS.
  • SEE WHAT’S UP. KNOW WHAT’S ON: Track how much electricity you’re using, what time your kids got home, or when someone leaves the basement light on. Sense identifies patterns in your energy use to help your family be more efficient, informed, and secure.
  • MONITOR YOUR HOME’S ENERGY USE FROM ANYWHERE: Real-time data through our iOS, Android, and web apps.
  • AVOID DISASTER: Set custom notifications for critical devices, like your sump pump, well pump, or flat iron.
  • MEETS RIGOROUS SAFETY STANDARDS: Sense’s components and system have been designed and ETL/Intertek certified for installation and operation inside the electrical panel.
Rank No. #13
Top Notch Parts Replacement Cylinder Head For 2004 2005 2006 2007 Yamaha Rhino 660 YXR660 Valves Springs
  • Replaces OEM Part # 5KM-11101-01-00
  • AFTERMARKET CYLINDER HEAD FOR 2003-2007 RHINO 660.
  • INCLUDES CYLINDER HEAD WITH VALVES, SPRINGS, ROCKER ARMS AND SPARK PLUG
  • INCLUDES ALL OTHER PARTS AS SHOWN. DOES NOT INCLUDE ANY GASKETS
Rank No. #14
NIBBI Racing Parts Original Replacement High Performance Speed Modified Carburetor Kit PE26MM GY6 Curved Pipe Throttle Cable High Flow Air Filter 48MM Fit GY6 Engine Scooter 100CC 125CC 150CC
  • 1.NIBBI PE Carburetor is refined to perfection and has set the standard among scooter and motocross racing carburetors.
  • 2.Chromed round-flat throttle valve for excellent response and more flow at high RPM.
  • 3.Available in four popular sizes to cover all your horsepower requirements.
  • 4.Easy tuning with jetting parts.
  • 5.Fit for 2T and 4T engine.
Rank No. #16
Topteng Motorcycle Cylinder Piston Kit, Cylinder Piston Rings Top End Kit Set fits for Yamaha TTR 125 TT-R 125 LE 2000 2001 2002 2003 2004 2005
  • Please confirm the part number before ordering. A complete top end kit is offered.
  • Engineered and Tested to Meet or Exceed Original Equipment Standards and Performance.
  • This kit is designed specifically for the DIY (Do It Yourself) mechanic. Cylinder is a Cast Aluminum 54.00mm Standard Bore Replacement with Steel Sleeve.
  • Forged Piston With 11:1 Compression Ratio. Our Gaskets are all top quality and will keep a perfect seal between all of the components.
  • The cylinder is cleaned, bored and honed to the specific clearances for the piston you receive in the kit. This kit includes a cylinder, piston, rings, wrist pin, circlips and top end gaskets.
Rank No. #17
INTBUYING 10T Hydraulic Cylinder Liner Puller Dry-Type Splitter 80-137mm with Box(Dry-Type)
  • 【Computer Desk】10T Hydraulic Cylinder Sleeve Liner Puller Dry-Type Splitter 80-137mm with Box .
  • 【Parameter Details】Maximum pressure: 10T;Max Axial maximum pull distance: 50mm;Max Longitudinal pull distance:140mm;Max Transverse pull distance:200mm
  • 【Included】9X pull plate ,1x Lifting plate,1x cardan joint,1x Lifting cylinder,1x handle,2x cylinder sleeve connecting rod,2x cylinder sleeve stand,1x cylinder sleeve beam
  • 【Description】80-137mm 10T hydraulic cylinder liner puller dry-type Splitter:80 85 88 93 100 102 105-106 125-126 137.
  • 【Guaranteed】If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your purchase, we will provide a money-back guarantee.
Rank No. #18
INTBUYING 15T Universal Hydraulic Cylinder Liner Puller Tool Dry-Type and Wet-Type for Hubs Fit Diameter of 80mm-140 mm
  • Application:This cylinder-pulling artifact is suitable for all cylinders with a diameter of 80mm-140 mm. Both dry type and wet type can be used. It`s suitable for the disassembly of internal combustion engine and cylinder liner. Also suitable for pulling hubs, flanges, gears, bearings and more.
  • Premium Quality:The puller is made of qualiy steel and processed by precision forging. Our Puller has stable performance and reliable quality. waterproof,durable and anti-corrision,longtime to use.
  • Durable: The supporting, lead screw and screw nut are all thickened, which will be more durable.
  • Easy operation:You just need to adjust the inner diameter of the cylinder liner that needs to be pulled out, and you can use it directly.labor-saving use, compact structure, flexible use, light weight, small bulk, handy carry It will not be restricted by any places.
  • Specification:Max Capacity: 15T. Max Reach: 180mm. Both dry and wet types can be used.
Rank No. #19
Dirt Bike Foot Pegs Compatible with CR125/250 2002-2007/ CRF125 2007-2013/ CRF150R 2007-2019/ CRF250R 2004-2019/ CRF450R 2002-2019 Foot Rests Pedals Red
  • FITMENT: Fits CR125/250 2002-2007, CRF125 2007-2013, CRF150R 2007-2019, CRF250R 2004-2019, CRF450R 2002-2019, CRF450X 2005-2019, CRF450RX 2017-2019, CRF450L 2019, CRF150R 2007-2019, CRF250X 2004-2019, CRF250RX 2019, CRF250L/M 2012-2018, CRF250RALLY 2017-2018 Foot Peg
  • MATERIAL: Gorgeous anodized surface,forged T7075-T6 material,strengthened teeth, crf150f foot pegs does not oxidize and scratch
  • ANTI-SKID&SAFETY: The 150r dirt bike foot rest are huge and comfortable and grip well; the crf250r foot pegs with 19 small spikes with good anti-slip effect and it does not slip when driving even when accelerating
  • PACKAGE INCLUDE: The cr125 foot rests comes with 4 spare screws, 2 bolts, 2 springs.The cleats on these are made so that you can still remove your foot without lifting it first.Easy to install, tighten all the nipples before you install.
  • 【Note】:Quality CR125 footpegs with hassled free warranty offered by us, please contact us if any question with the foot pegs
Rank No. #20
Wiseco Piston Kit Pro-Lite 54.00mm
  • Offroad 4-Stroke > ENGINE > Pistons > PK KIT
  • Size: 54
  • Application: 1992-97 HO CR125 PRO-LITE 54.0MM (676M)
  • Wiseco Piston PK KIT PK1164.

Last update on 2021-07-01 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Cr125 Cylinder Sleeve for our consumer to review. The reports above show ratings of the best overal, best cheap Cr125 Cylinder Sleeve to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.