The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Chevy 350 Intake Manifold And Carb of 2020 – Consumer Guide & Reviews

Rank No. #1
Speedmaster 1-147-004 LowRise Intake Manifold 1996-Up Small Block Chevy 350 Vort
  • 1996-Up Small Block Chevy 350...
  • Height: 4.250 in....
  • Non-EGR...
  • RPM Range: Idle-5,500...
  • Polished Finish The Speedmaster LowRise Manifolds are our lowest profile manifold and is also the only one that is street legal on pollution controlled vehicles. It is set up to accept a spread bore carb but comes with an adapter plate that permits the use of square bore carbs. To remain street legal with a square bore carb, you must use one that is also approved as street legal for your application. This Speedmaster LowRise manifold is designed to fit engine swaps using the 1996 and later...
Rank No. #2
TYFYB Aluminum Satin Intake Manifold For Small Block Chevy SBC 305 327 350 400 1957-1986 1500-6500 RPM
  • Intake gaskets with 1.23" wide x 1.99" tall port holes;Material:Aluminum;Bolt Hole Pattern:5.160" x 5.625";
  • Carburetor Flange Type:4-Barrel Square Bore;Power range is 1500-6500 RPM
  • Aluminum intake is a dual plane, 180° street manifold designed to be used with Holley, Carter AFB or Edelbrock square flange carbs.
  • Power comparable to single plane manifolds yet retains throttle response/driveability of a dual plane
  • Fitment:Fits 1957-86 SBC Chevy engine applications.
SaleRank No. #3
JEGS Small Block Chevy 1955-1986 Intake Manifold | Non-EGR Design | Idle - 5500 RPM Power Range | Cast Aluminum | Square Bore Carburetor Mounting Pad
  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more
  • IDLE TO 5500 RPM POWER BAND for street or mild race applications
  • FITS GM AND CHEVROLET CYLINDER HEADS from 1955 through 1986
  • FABRICATED FROM CAST ALUMINUM for weight savings and improved performance
Rank No. #4
JEGS 513003 Intake Manifold for 1955-1986 Small Block Chevy 265-283-302-327-350-400
  • 1955-1986 Small Block Chevy...
  • Square Bore...
  • Idle to 5500...
  • Black Aluminum...
  • Port exit dimensions: 1.17" x...
Rank No. #5
Aluminum Intake Dual Plane Intake Manifold Compatible With 1996-2000 Chevy Chevrolet SBC L31 Vortec 350 383
  • Dual Plane Design
  • These cast-aluminum manifolds are pressure-tested for leaks
  • Durable and long lasting
  • Improved power from idle to 6,500 rpm
  • Replaces Original Equipment (OE) number: 2116
Rank No. #6
Speedmaster 1-147-001 LowRise Intake Manifold 1957-1995 Small Block Chevy 350 He
  • 1957-1995 Small Block Chevy...
  • Height: 4.050 in....
  • Non-EGR...
  • RPM Range: Idle-5,500...
  • Satin Finish The Speedmaster LowRise Manifolds are our lowest profile manifold and is also the only one that is street legal on pollution controlled vehicles. It is set up to accept a spread bore carb but comes with an adapter plate that permits the use of square bore carbs. To remain street legal with a square bore carb, you must use one that is also approved as street legal for your application. This Speedmaster LowRise manifold is a direct replacement for the stock manifold on 1957-95...
Rank No. #7
JEGS Small Block Chevy 1996-2002 Intake Manifold | For Use With Vortec Cast Iron Cylinder Heads | Non-EGR | Idle - 5500 RPM Power Range | Black Cast Aluminum | Square Bore Mounting Pad
  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more
  • FABRICATED FROM BLACK CAST ALUMINUM for weight savings, great looks, and improved performance
  • FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002
  • IDLE TO 5500 RPM POWER BAND for street or mild race applications
Rank No. #8
Edelbrock 2701 Performer Intake Manifold
  • Made of aluminum with a natural finish
  • Dual plane intake style
  • RPM range is idle to 5, 500 RPM
  • Single carburetor without EGR
  • Use on stock or original equipment standard deck
Rank No. #9
Assault Racing Products PC2012 Small Block Chevy Dual Plane Plus Polished Aluminum Intake Idle-5500 RPM SBC
  • RPM Range: Idle - 5500
  • Dual Plane Plus
  • Manifold Height: 4.40 in
  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor
  • Accepts late-model water neck, air-conditioning, alternator, and HEI brackets
Rank No. #10
Assault Racing Products PC2026 Small Block Chevy Dual Plane Air Gap Satin Aluminum Intake 1500-6500 RPM SBC
  • RPM Range: 1500 - 5500
  • Dual Plane Air Gap
  • Manifold Height: 4.65 in
  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor
  • Open air gap under plenum for cooler fuel charge
Rank No. #13
Assault Racing Products PC2028 Small Block Chevy Dual Plane Vortec Satin Aluminum Intake 1500-6500 RPM SBC
  • RPM Range: 1500 - 5500
  • Dual Plane Vortec
  • Manifold Height: 4.65 in
  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor
  • Open air gap under plenum for cooler fuel charge
Rank No. #14
Edelbrock 2040 Performer EPS Intake Manifold Installation Kit, Multicolor, One Size
  • precision built
  • package dimensions: 22.86 h x 66.04 l x 36.195 w (centimetres)
  • package weight: 16.749 pounds
  • country of origin : united states
  • Fit type: Vehicle Specific
Rank No. #15
Edelbrock 7501 Performer RPM Air-Gap Intake Manifold
  • Dual plane intake style with an Air-Gap
  • Air-Gap design separates the runner from the heat of the lifter-valley cover
  • Temperature sending unit boss clears all water necks
  • No provision for exhaust heated chokes and no exhaust cross-over
  • Will not fit under stock corvette hood and is meant for square bore carburetors
Rank No. #16
Proform 67457 Engine Lift Plate
  • Package Dimensions: 19.49 L x 8.02 H x 11.38 W (inches)
  • Package Weight : 37.15 pounds
  • Country of Origin : Taiwan, Province Of China
  • Part number: 67457
Rank No. #17
Edelbrock 2101 Performer Intake Manifold
  • Intake is made of aluminum material with a natural finish
  • Basic operating RPM is from idle to 5, 500 RPM
  • Has provisions to add oil fill tube
  • Dual plane intake style
  • Intake is 50-state street legal, when used with the correct carburetor and in the correct application
Rank No. #18
Assault Racing Products PC2031 Small Block Chevy Single Plane High Rise Satin Aluminum Intake 3000-7500+ RPM SBC
  • RPM Range: 3000 - 7500+
  • Single Plane High Rise
  • Manifold Height: 6.06 in
  • Square bore carb bolt pattern for the Holley 4150/4160 style carburetor
  • Unique removable water flow divider to eliminate the thermostat in racing applications
Rank No. #19
Edelbrock 1405 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Manual Choke New Carburetor
  • Designed and calibrated for optimum marine performance
  • Single feed fuel inlet with air valve secondary type
  • Shiny silver finish and calibrated for gasoline
  • Manual choke with 4-barrel square bore carburetor flange
  • Backed by Edelbrock's exclusive 90 day
Rank No. #20
Edelbrock 1406 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Electric Choke Carburetor
  • Designed and calibrated for optimum marine performance
  • Single feed fuel inlet with air valve secondary type
  • Shiny silver finish and calibrated for gasoline
  • Electric choke with 4-barrel square bore carburetor flange
  • Backed by Edelbrock's exclusive 90 day

Last update on 2021-07-05 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Chevy 350 Intake Manifold And Carb for our consumer to review. The reports above show ratings of the best overal, best cheap Chevy 350 Intake Manifold And Carb to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.