The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Chevy 305 Intake Manifold of 2020 – Consumer Guide & Reviews

SaleRank No. #1
Z Whip SBC Stainless-Steel Intake Manifold Bolt Kit 3/8-16 1” BOLTS Compatible with Chevrolet Chevy V8 Small Block Engines 265 283 305 327 350 383 400 5.0L 5.7L TPI TBI 1955-1995 Gen I heads
  • Compatible with all Chevy Small Block Oem and Most Aftermarket Intake Manifolds 265 283 305 307 327 350 383 400
  • These are High Grade 18-8 Stainless-Steel Steel 3/8-16x1” Bolts and Washers That will NOT rust or Corrode like the chrome or steel ones sold. These Use a 5/16” Allen Wrench/Socket
  • When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
  • We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
  • Meets or Exceeds Industry Standard ASME / ANSI Specifications
Rank No. #2
ICT Billet 350 Chevy SBC Intake Manifold Flange Bolt Set Standard 3/8" Thread LT1 5.7L Compatible with Chevrolet Small Block V8 305 327 350 383 5.0L Eight Cylinder Long Water Pump 551653
  • If you're needing to replace your old rusty intake bolts to go with your clean intake manifold, this bolt set will get you back on the road.
  • These bolts will fit a Small Block Chevy up to 1997, including the LT1.
  • Made in Wichita, Kansas from aerospace grade, USA produced billet aluminum
  • We include 12 bolts in the set, so you'll have everything to get the job done.
  • These bolts are a standard 3/8" coarse thread. Be sure to check your existing bolts and cylinder heads for matching thread.
Rank No. #3
Edelbrock 2040 Performer EPS Intake Manifold Installation Kit, Multicolor, One Size
  • precision built
  • package dimensions: 22.86 h x 66.04 l x 36.195 w (centimetres)
  • package weight: 16.749 pounds
  • country of origin : united states
  • Fit type: Vehicle Specific
Rank No. #4
Edelbrock 2701 Performer Intake Manifold
  • Made of aluminum with a natural finish
  • Dual plane intake style
  • RPM range is idle to 5, 500 RPM
  • Single carburetor without EGR
  • Use on stock or original equipment standard deck
SaleRank No. #5
Fel-Pro 1205 Intake Manifold Gasket Set
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Validated for fit
  • form
  • and function
SaleRank No. #6
Fel-Pro MS903142 Intake Manifold Gasket Set
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
Rank No. #8
Edelbrock 27013 Intake Manifold
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 3. 74 in. Front Height, 4. 27 in. Center Height, 4. 8 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR
Rank No. #9
Dorman 615-305 Engine Intake Manifold Gasket Set for Select Models, Black
  • Direct replacement - this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
  • Restores functionality - this gasket set is made to fit and fully restore part functionality after the original gasket fails
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
Rank No. #10
Mr. Gasket Int Bolts Sb Chev Hex Head, Silver
  • Heat treated to Grade 5 specs and zinc plated to resist rust and corrosion
  • Designed specifically for small block Chevys Chryslers and AMCs
  • Three eighths coarse thread 1.00 inch long
  • Comes with extra thick parallel ground flat washers for a smooth consistent torque
  • Set of 12
Rank No. #11
Moroso 38400 Intake Bolt for Small Block Chevy
  • Item Package Weight : 0.62 pounds
  • Country of Origin: UNITED STATES
  • Model Number : 38400
  • Package Dimension : 7.18 " L x 5.37 " W x 1 " H
Rank No. #12
Edelbrock 5001 Torker II Intake Manifold
  • Monotube internal design
  • Durable powder-coated finish for the best corrosion resistance
  • Tube ends are rolled closed for leak-free construction
  • Welds are done with robotic projection welder for accuracy and consistent quality
  • Includes large 46mm piston for more consistent damping
SaleRank No. #13
JEGS Small Block Chevy 1955-1986 Intake Manifold | Non-EGR Design | Idle - 5500 RPM Power Range | Cast Aluminum | Square Bore Carburetor Mounting Pad
  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more
  • IDLE TO 5500 RPM POWER BAND for street or mild race applications
  • FITS GM AND CHEVROLET CYLINDER HEADS from 1955 through 1986
  • FABRICATED FROM CAST ALUMINUM for weight savings and improved performance
SaleRank No. #14
JEGS Small Block Chevy 1996-2002 Intake Manifold | For Use With Vortec Cast Iron Cylinder Heads | Non-EGR Design | Idle - 5500 RPM Power Range | Cast Aluminum | Square Bore Carburetor Mounting Pad
  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more
  • FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002
  • IDLE TO 5500 RPM POWER BAND for street or mild race applications
  • FABRICATED FROM CAST ALUMINUM for weight savings and improved performance
Rank No. #15
ARP 134-2101 SB Chevy 12pt Intake Manifold Bolt Kit
  • ARP Intake Manifold Bolt Kit Small Block Chevy P/N 134-2101
  • Part number: 1342101
  • Fit type: Vehicle Specific
  • Package Weight: 0.65 pounds
Rank No. #16
Small Block Chevy Hi-Rise Intake Manifold, Plain Finish
  • If you're building a high-performance small block Chevy on a budget then this is the intake manifold for you!
  • The 180 degree dual plane design with larger-than-stock plenum and runners optimizes power
  • The broad power range from 1500 to 6500 RPM works great for hot rods, muscle cars, street machines and street/strip
  • Hi-Rise design with 5" carb pad height will still fit under many stock hoods
  • Dual distributor hold downs with clearance for nearly any distributor including HEI distributors makes this a versatile manifold
SaleRank No. #17
A-Team Performance Complete Distributor Compatible with Chevy GM EFI VORTEC 1996-2002 Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500 Black Cap
  • Direct Replacement — Direct EFI distributor replacement for stock units with improved features such as Zinc-coated steel hold down clamp for a secured fit
  • Specifications —Magnetic Pick-Up Trigger, Computer-Controlled Advance Type, Crab-Style Female Cap, and 6 Cylinders
  • CNC-Machined — High-quality EFI distributor with CNC-machined aluminum housing, steel internal, and chromoly steel gear material construction
  • Compatible With — Chevy / GM 5.0 L / 305 in3 commonly referred to as Vortec 50005 and .7 L / 350 in3 commonly referred to as Vortec 5700
  • Package Inclusions — 1 x A-Team Performance Complete Distributor Compatible with Chevy GM EFI VORTEC 1996-2002 Small Block 5.0L 5.7L 305 350 Tahoe C1500 K1500 C2500 K2500 Black Cap
Rank No. #18
Speedmaster 1-147-019 MidRise Intake Manifold Big Block Chevy 454 Oval Port Heig
  • Big Block Chevy 454 Oval...
  • Height: 4.650 in....
  • Non-EGR...
  • RPM Range: 1,500-6,500...
  • Satin Finish The Speedmaster MidRise Air design features the identical plenum and runner design as the normal MidRise. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power and...
SaleRank No. #19
Milodon 85400 3/8" 6-Point Hex Head Intake Bolt Kit for Small Block Chevy, Small and Big Block Chrysler
  • Easy to work with in tight quarters
  • Allows use of standard non 12 point socket wrench
  • Heat-treated intake bolts come complete with washers
  • Fit type: Vehicle Specific

Last update on 2021-02-24 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Chevy 305 Intake Manifold for our consumer to review. The reports above show ratings of the best overal, best cheap Chevy 305 Intake Manifold to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.