The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Cheap Tiny Whoop of 2020 – Consumer Guide & Reviews

Rank No. #1
BETAFPV Meteor65 Acro 1S Brushless Whoop Drone Frsky with 19500KV 0802 Motor BT2.0 Connector F4 1S Brushless FC Micro Tiny Whoop FPV Acro Whoop Drone
  • 【BT2.0 Connector】The Meteor65 1S whoop drone comes with BETAFPV exclusive designed BT2.0 connector, which can support 9A continuous current and 15A burst while the PH2.0 connector just supports 4.5A continuous current. Solving the low voltage warning issue of PH2.0 connector on 1S brushless whoop when you start flying
  • 【19500KV 0802 Motor&31mm Props】Equipped with 0802 19500KV motor, the KV value is lower than racing version, which makes the flight time up to 4min. Suitable for both indoor and outdoor flight for beginners
  • 【F4 1S Frsky FC&M01 AIO Camera】BETAFPV newest and lightest F4 1S brushless FC and M01 AIO camera. It’s a perfect combo which has better performance on function for maximum weight savings
  • 【Meteor65 Frame】New marvellous design with 3.2g ultra lightweight. Compared to previous 65mm brushless frames, motor mounting position uses triangle bilateral stretch structure, makes frame more aesthetic. With the low profile of battery slot height, the drone's gravity center is reduced and improved the sense of compactness. It provides you more durable and smoother flight experience
  • 【Package&Support】Meteor65 upgrade to a kit, it is with abundant accessories of 2 lipo batteries, BT2.0 charger & tester, extra props, 1 screwdriver and the portable bag. Any problem please contact us via Email support04@betafpv.com
Rank No. #2
BETAFPV 8pcs BT2.0 260mah 1S Battery 4.35V Lipo 30C/60C FPV Battery with BT2.0 Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Meteor65 Acro Micro Drone
  • 【Lighter weight for 1S drone】1.12g Lighter than BT2.0 300mAh 1S battery, 1S brsuhshless micro drone can be more lighter and still gain powerful performance in flight with this BT2.0 260mAh 1S lipo. Suitable for weight-sensitive 1S micro whoop drone
  • 【9A Continuous current】This 260mAh 1S battery comes with BT2.0 Connector which can support 9A continuous current and 15A burst while the PH2.0 connector is just support 4.5A continuous current
  • 【Discharge Rate】The discharge of the BT2.0 1S lipo is improved a lot that the voltage drops more slowly, so pilots can enjoy more flight time without disturb of low voltage warning by solving the problem of voltage sag
  • 【BT2.0 Connector】BT2.0 Connector AKA 1.0mm Banana Connector is more durable in terms of fit and conductivity than crimped pin
  • 【Flight Time】Discharge curve is higher than PH2.0 battery which means it can discharge more current in the same capacity and provide more power
Rank No. #3
BETAFPV Beta65X FPV 2S Brushless Whoop Drone Frsky with BT2.0 Connector Nano HD Camera F4 AIO 2S FC 14000KV 0802 Motor for CineWhoop FPV Racing Whoop Drone Quadcopter
  • 【Performance】Beta65X FPV 2S brushless drone weighs only 24.57g. Small size and big power, gives pilots a good balance of weight and nice punch on 2S battery
  • 【14000KV 0802 Motor】Equipped with lightest 14000KV 0802 brushless motors, powerful and efficient. Perfect match with Gemfan 31mm 4-blade 1.0mm shaft props, provides you an insane flight experience indoor
  • 【F4 AIO 2S FC with BT2.0 Connector】Adopted with F4 AIO 2S Frsky FC with the BT2.0 connector, which can provide a stable and powerful continuous current so that you can extend the flight time to 3:00-4:00mins compared with the Beta65 pro 2
  • 【C01 Pro Cam&M01 VTX】BETAFPV lightest C01 Pro micro camera and M01 VTX. It’s a perfect combo which can reduce the weight of the whoop drone
  • 【Frame&Support】Used Meteor65 frame and adopted the stackable battery slot to cut down on the wind resistance. Anything problem pls contact us, support04@betafpv.com
Rank No. #4
EMAX Tinyhawk S 1-2s Brushless Micro Indoor Racing Drone Whoop 75mm BNF FRSKY Ready to Fly FPV Beginners Durable Inverted Motors Full Acro Level Horizon Mode
  • Tinyhawk 1-2s capable.
  • 55+MPH top speed
  • Includes 1 x 1s and 1 x 2s battery
  • Bigger motors than Tinyhawk Original plus it includes 4 blade propellers for Turtle Mode
  • Includes 1s and 2s battery charger
Rank No. #5
BETAFPV Meteor75 Frsky 1S Brushless Whoop Drone with F4 1-2S AIO FC BT2.0 Connector 1102 18000KV Motor M01 AIO Camera 25mW VTX for Tiny Whoop Micro FPV Racing Whoop Drone Quadcopter
  • 【BT2.0 Connctor】With The BT2.0 connector, Meteor75 effectively decreases internal connector resistance for a much better discharge performance compare with initial PH2.0 connector
  • 【BT2.0 450mAh 1S Battery】Meteor75 is the first generation whoop powered by brand-new BT2.0 450mAh 1S battery,you can get 3:00-4:00 flight time
  • 【1102 18000KV Motors】Equipped the latest 1102 18000KV motors and 40mm 3-blade props, which provides pilots stronger experience of a powerful outdoor flight like a 2S whoop drone
  • 【F4 1- 2S AIO FC】With the high performance STM32F411 processor 1-2S AIO FC boards and betaflight_matekf411rx_4.0.0 (Development Version), pre-soldered the BT2.0 cable, which can provide more stable and powerful 9A continuous current
  • 【Weight&Package】Weight 28.7g. The package comes with 1*BT2.0 450mAh 1S lipo and 1*BT2.0-PH2.0 adapter cable. The adapter cable is convenient for charging BT2.0 battery with your stock PH2.0 charger
Rank No. #6
Makerfire Micro FPV Racing Drone with FPV Goggles 5.8G 40CH 1000TVL Camera RTF Tiny Whoop Mini FPV Quadcopter for Beginners,Altitude Hold, One Key Return, Headless Mode Armor Blue Shark
  • Powered propeller: Toughness 4 leaf propellers,strong wind resistance,more powerful,its not easy to crash and damage.Indoor and outdoor 5.8ghz FPV Racing Drone.Flight time: about 5-6minutes
  • FPV Drone with FPV Goggles: FPV first-person perspective,experience more shocking,1000TVL M7 lens 120° FOV H170° Wide angle camera.Real-time transmission,and HD Vedio.
  • Headless mode: Break through the headless flight mode can directly control the aircraft course,when the goggle can npt identify the direction of the left or right,then can fly around freely.
  • One key return: Just press the remote control button,the aircraft automatically fly back,no extra operation,very easy and convenient.
  • 360° All-round collision ring: All-round protection,both to reduce the damage caused by the impact of the flight,moreover also to prevent the rapid rotation of the propeller scrastch the human hand,safe and reliable.
Rank No. #7
BETAFPV Beta65S 65mm Whoop Frame Kit 3.6g V4 Version with 7x16mm 19000KV Brushed Motors Compatible with Tiny Whoop Racing
  • This Beta65S V4 version frame was modified based on the suggestion of FPV fans. The frame is made of the same material as the stock Inductrix, but more durable and lighter only 3.6g compared to the stiff V3 version which weights 4.1g.
  • The most powerful 7x16mm motors are upgraded from 17500KV to 19000KV. We are sure that these motors will turn your micro whoop into powerful monster.
  • Battery holder location is changed to a bit higher, enabling pilots to do perfect acro maneuver. And the 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear.
  • These 7x16mm 19000KV motors with JST 1.25mm 2P connector only fit for BETAFPV Beta65S frame and Eachine E011 frame for the moment. It does not fit the regular Whoop frames and perfect for Blade Inductrix, Tiny Whoop flight controller, whose weight is 2.9g (including cables and connector).
  • The V4 version has been added the pegs again while missing canopy mounting pegs on V3 frame. So now just place the Tiny Whoop canopy and rip it.
Rank No. #8
BETAFPV 3 Sets 7x16mm Motor 19000KV Brushed Motors with JST-1.25 Connector for Micro FPV Tiny Whoop Beta65S Frame and Eachine E011 Frame Only
  • The most powerful 7x16mm motors are upgraded from 17500KV to 19000KV. We are sure that these motors will turn your micro whoop into powerful monster.
  • Weight is 2.95g per motor (including cables and connector); Size: 7x16mm
  • With JST 1.25mm 2P connector, perfect for Blade Inductrix, Tiny Whoop flight controller
  • These 7x16mm motors only fit for BETAFPV Beta65S frame and Eachine E011 frame for the moment. It does not fit the regular Whoop frames.
  • Package: 3 SETS * 7x16mm 19000KV motors (6CW +6CCW)
Rank No. #9
BETAFPV 100pcs Screw Rubber Damper Set M1.2x4 Screw M1.4x5 Screw Rubber Damper for Tiny Whoop FPV Racing Quadcopter
  • 【Application】Those screws and rubber dampers are really useful when you are mounting flight controller board to your whoop drones
  • 【M1.2x4 &M1.4x5 】M1.2* 4 screws fit for stock Blade Indcutrix frame / 65mm frames. M1.4* 5 screws fit for Eachine black E010 frame / 75mm / 85mm frames
  • 【Black &Blue Rubber Damper】Black rubber dampers has a gap of 0.8mm, suitable for ALL brushed FC boards. Blue rubber dampers has a gap of 1.8mm, suitable for 2-4S AIO FC boards
  • 【White Rubber Damper】White rubber dampers has a gap of 1.2mm, suitable for 2S AIO FC boards, F405 FC stack etc.
  • 【Package】Package is including 20 * M1.2x4 screws, 20 * M1.4x5 screws, 20 * blue rubber damper, 20 * black rubber damper, 20 * white rubber damper
Rank No. #10
Gaoneng 350mAh 1S Lipo Battery HV 30C 3.8V with JST-PH 2.0 Connector for Tiny Whoop Micro FPV Racing Drone 6PCS
  • High capacity of 350mah, Small size of 70 * 10 * 5mm, is the great choice of Tiny Whoop
  • The weight of the 350mah 1s 30C 3.8v hv lipo battery is approx 8.6g/pcs, only 0.7g heavier than the 300mAh battery
  • The battery connector is JST-PH 2.0, NOT work with stock Blade Inductrix, Blade Nano QX, Nano CPX, Blade mCX etc
  • As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water
  • Note: If the battery is puffed or DOA while receiving, our team will be here for you
Rank No. #11
GAONENG 260mAh HV 1S LiPo Battery 30C 3.8V LiHV for US65 UK65 URUAV UR65 Mobula7 Tiny Whoop Micro FPV Racing Drone with JST-PH 2.0 Powerwhoop mCPX Connector 6PCS
  • High capacity of 300mah, Small size of 66x11.5x5.9mm, is the great choice of US65 UK65 URUAV UR65 Mobula7
  • The weight of the 300mah 1s 30C 3.8v hv lipo battery is approx 7.9g/pcs, Connector: JST-PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
  • The battery connector is JST-PH 2.0, NOT work with stock Blade Inductrix, Blade Nano QX, Nano CPX, Blade mCX etc
  • As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water
  • Note: If the battery is puffed or DOA while receiving, our team will be here for you
Rank No. #12
Handbag Backpack Bag Pro Tiny Whoop Carrying Case Whoop Drone Storage Quad Box for Blade Inductrix Tiny Whoop QX90 QX95 E010 Frsky Transmitter Fatshark FPV Goggles
  • Compact and light, very useful and convenient to use
  • Hard outer case, offers extra security for the protection of your drone
  • This backpack carrying case bag is suitable for Blade Inductrix / Tiny Whoop/ QX95/QX90 / QX80 / X73 ect. micro racing quadcopter
  • With strong high density foam Liner offers snug compartments for two Tiny Whoop models, an X9D transmitter, a battery, a charger as well as a Fatshark HD2 FPV goggles
  • With small bag to store charger and battery along with Goggles or Drone for convenient using.Besides, it will prevent the Goggle and charger from collision
Rank No. #13
Usmile 3pcs FPV AIO Camera Mount for Blade Inductrix Tiny Whoop Compatible with VM275T CM275t HC48 AIO Camera
  • Specailly designed for Blade Inductrix Tiny Whoop
  • Lightweight, Weighs in at approx 1g, holds the camera tight
  • Made of high quality material, not 3d printed.
  • Easy to install
SaleRank No. #14
EV-PEAK 4 in 1 JST/MOLEX/MCPX/MX Connectors Balance Charger for Tiny Whoop Blade Inductrix LiPo LiHV Battery Packs
  • AC/DC Input: the 1S balance charger supports AC voltage input 100-240V and DC input 9-12V.And with LiPo/LiHV switch to charge different type of battery LiPo/LiHV.
  • Simultaneously 4 Channels Charge: the portable balance charger equipped with 4 charging ports, supporting 4 set of battery charging simultaneously to save your time.
  • 4 in 1 JST/MOLEX/MCPX/MX Connectors: Not only the intelligent charger has 4 charge channel, but it integrated with JST/MOLEX/MCPX/MX 4 in 1 connectors to compatible with different type of battery packs.
  • Multi-protection Mechanism: with multi-protection mechanism built-in, including short-circuit/over-voltage/over-current/over- temperature/reverse polarity, the powerful 1S LiPo/LiHV battery charger can provide Max. protection and extend lifespan of battery.
  • Real Time Status: LCD screen shows real-time charging voltage and charging current.Orders are fulfillment by Amazon, but EV-PEAK would also provide worry-free customer service in case you reach out to us via evpeak at ev-peak dot com.
Rank No. #15
AKK S2 5.8G 48CH 25mW VTX 600TVL 1/3 Cmos AIO FPV Camera with Clover Antenna for FPV Drone Like Tiny Whoop Blade Inductrix etc
  • Super light weight, All in one VTX + 600TVL Camera + Clover Antenna
  • A Ready to fly Micro AIO Camera Combo
  • 2 row LED indicators, 6 LED for band, 8 LED for channel.
  • 4-leaf antenna for better signal transmission, easy to install.
  • 48 channel with raceband, good quality image with zero latency, Button control instead of switches to change channels.
Rank No. #16
BETAFPV 3 Sets 6X15mm Motor 19500KV Brushed Motor Speed Insane for Micro FPV Tiny Whoop Eachine012 or Beta65 etc
  • KV value is show on motor for pilots to distinguish the speed quickly.
  • Just fit for Eachine012, Eachine010s, Beta65 BNF etc.
  • Special Sauce Edition 19500KV / 72,000 RPM@3.7V.
  • Motor Diameter: 6mm, Motor Length: 15mm, With 1.25mm JST Plug.
  • The weight of the BETAFPV 615 19500KV Motor is about 1.8g/pcs
Rank No. #17
BETAFPV Beta65S Brushed Whoop Drone 1S Frsky FPV Quadcopter with F4 1S Brushed FC M01 AIO Camera 5.8G 25mW VTX 19000KV 7X16 Motor for Tiny Whoop FPV Racing
  • Upgrade with F4 FC brushed SPI Frsky receiver and M01 AIO FPV camera. The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be set as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.
  • This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
  • F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver.
  • More punch on throttle with faster 19000KV 7x16mm motors and 3-blade propellers.
  • Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Rank No. #18
Mirarobot S85 FPV Drone Racing with 720P HD Camera Micro Quadcopter Tiny Whoop, 5.8G 40CH 6-Axis 8.5mm Motor Powerful, High -Voltage Battery, Automatically Increase Stability RTF
  • 【Racing Drone】Violent 5.8G FPV flight. 8520 motor provides strong power for violent flight. 3.8V 500mAh high-voltage battery for 6 - 8 minutes flight.
  • 【HD Top Camera】5.8G 48CH 25mW frequency 600 line resolution, make your vision clearer. With VR devices, it's easier to control your drones. And you can film a video and record good times.
  • 【More Cool Function】Pressure/3/6 axis mode automatically switch.Native flight control one key flip. Not only can cross the room and the corridor, but also perform to your friend.
  • 【Special Mode】Height can be set by press on air pressure button, with accurate positioning of height, location and stable levitation, suitable for FPV and flight show.
  • 【Ready to fly】Ideal toys and drones for boys or beginners. Remote control distance: 150M; Turn on the power supplies of the drone and the remote control, then the Pairing can be done. Press one-key starting.
Rank No. #19
Crazepony 2pcs Tiny Whoop Canopy with Screws for Tiny Whoop Blade Inductrix FPV Micro Quadcopter Mini Drone
  • Item Name: Tiny Whoop Canopy
  • Colour: 1 * White, 1 * Yellow
  • Weight: 3.0g
  • for Tiny Whoop built, work with Eachine e010 frame, blade inductrix frame and inductrix fpv frame
Rank No. #20
BETAFPV 2pcs Beta65S V4 Version 65mm Whoop Frame Kit 3.6g Compatible for 7X16mm 19000KV Motor for Tiny Whoop Racing
  • This Beta65S V4 version frame was modified based on the suggestion of FPV fans. The frame is made of the same material as the stock Inductrix, but more durable and lighter only 3.6g compared to the stiff V3 version which weights 4.1g.
  • Battery holder location is changed to a bit higher, enabling pilots to do perfect acro manuver. And the 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear. Best Match of 716 19000KV motors(Not including) give this quad more power and more flight time than your regular 6mm Whoop.
  • Support Struts is strengthened to prevent them from being broken after a harsh crash. The Beta65S V4 frame is far more flexible than the stiff V3 guy.
  • The V4 version has been added the pegs again while missing canopy mounting pegs on V3 frame. So now just place the Tiny Whoop canopy and rip it.
  • Redundant design of the LED holder is removed in the V4 BETA 65S frame.

Last update on 2020-07-11 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Cheap Tiny Whoop for our consumer to review. The reports above show ratings of the best overal, best cheap Cheap Tiny Whoop to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.