The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Chainsaw Grinder Disk of 2020 – Consumer Guide & Reviews

Rank No. #1
CZS Woodcarving Disc 4/4.5 Inch Angle Grinder Wheel Disc Woodworking Circular Chain Saw Blades for 100/115 mm Angle Grinder,22 Teeth,5/8” Arbor
  • The wood carving disc takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber with their speed and maneuverability.
  • The chain saw blade is held in place between two steel plates which provides a secure grip for carving. Regardless of grain or knots the blade cuts through the material with ease to the user.
  • This Angle Grinder Disc is made of high quality steel ,Chains can be either be sharpened by using a chain saw file or replaced as need be.
  • Fits for 4 inch(100mm) or 4-1/2 inch(115mm) Angle Grinder; Arbor(Center Hole):5/8 inch(16mm); Maximum speed (RPM): 14000
  • Warning: It is not advised to use the switch lock feature on any grinder. Doing so may result in serious injury or even death.
SaleRank No. #2
4 Inch Grinder Chain Disc 22 Tooth Wood Carving Disc For 100 115 Angle Grinder 5/8 Inch Center Hole
  • Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber with their speed and maneuverability.
  • The chain saw blade is held in place between two steel plates which provides a secure grip for carving. Regardless of grain or knots the blade cuts through the material with ease to the user.
  • Our 22 tooth design provides a smooth "finished" surface which is great for minimal sanding afterwards.
  • Chains can be either be sharpened using a chain saw file or replaced as need be.
  • This grinder chain disc is great for curved work, like the inside of bowls, for fast waste removal.
Rank No. #3
Angle Grinder Blade Chain Disc Woodworking Tool Circular Saw Blade 4inch Wood Carving Disc Grinder Chain Plate 22 Fine Tooth Grinder Disc Sanding Disc for 100/115 mm Angle Grinder
  • ✅[Grinder Disc Dimension] Arbor size : 5/8" (16mm)/Diameter: 4" (102mm)/Fits For 4" (100mm) or 4-1/2" (115mm) Angle Grinder.Maximum speed (rpm) :14000; Wheel thickness:0.5cm;
  • ✅[Material] Steel, 4 Inch Diameter Chain 22 Tooth Fine Cut Carving, Circular Saw Blades provides a smooth "finished" surface which is great for minimal sanding afterwards.Steel /Chains can be either be sharpened using a chain saw file or replaced as need be.
  • ✅[Safe]The grinder disc is held in place between two steel plates which provides a secure grip for carving, Regardless of grain or knots the blade cuts through the material with ease to the user.
  • ✅[Function] Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of plastics, ice and hard rubber with their speed when works,maximum speed up to 14000rpm /Great for curved work, like the inside of bowls, for fast waste removal.
  • ✅[Note]: It is not advised to use the switch lock feature on any grinder. To prevent serious injury,amputations,and DEATH,read and follow all power tool instructions and all instructions included with this item
Rank No. #4
Yakamoz 4-1/2" Angle Grinder Disc 13 Teeth Chain Plate Wood Carving Disc Cutting Blade for 7/8" Arbor Angle Grinder Woodworking Cutter Tool
  • Arbor size: 7/8" (22mm), Diameter: 4-1/2" (115mm), Maximum speed: 14000RPM, Wheel thickness:0.2" (5mm)
  • 13 Tooth cutting chain design provides a smooth “finished” surface which is great for minimal sanding afterwards.
  • The chain saw blade is held in place between two steel plates which provides a secure grip for carving.
  • Made of hard carbide, which has a good feature in wear resistant and durable.
  • Ideal attachemnt for 4-1/2" (115mm) Angle Grinder, perfect for cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber with their speed and maneuverability.
Rank No. #5
Oregon 520-120 Bench Mount Chain Grinder
  • Grinding wheel wear adjustment
  • Indexing chain stop assembly
  • Motor-head release button.
  • Longer, self-centering, firward/aft sliding vise.
  • Built-in light and one-way motor rotation for safe operation.
Rank No. #6
Wood Carving Disc(Replacement Chain)&Grinding Wheel Shaping Disc,Anti-Kickback DoubleSaw Teeth Shaper,5/8 In Inner Diameter, Angle Grinder Attachment for Wood Cutting (4"or4-1/2"),Cut Resistant Gloves
  • 【Superb craftsmanship】The woodcarving saw blade adopts stainless steel disc design, 22-tooth chain ring of hard alloy steel, wear-resistant and scratch-resistant, which can be easily cut into wood. The grinding disc is made of high-carbon steel as a whole, with high-frequency surface fire technology on the surface, barbed blade teeth design, which can quickly remove materials, and the humanized design of the deep groove on the back, which is fast down, safer and more reliable.
  • 【Excellent design】A beautifully designed gift box to give your friends a perfect gift. The tooth icon is engraved on the product to make installation easier. We designed a color drawing on the surface of the box, which described all the steps required to install the disk on the angle grinder and how to replace the chain. We also mentioned the most important preventive measures and recommendations. A pair of cut-resistant gloves is provided to protect your hands from cuts and bruises.
  • 【Wide application】Thinkwork woodcarving chain discs and grinding wheel shaping discs is suitable for non-metallic materials, suitable for any wood, cutting everything from hardwood, plastic and other soft materials, without worrying about hard places such as wood bumps. Ideal for cutting, carving, and removing small tree stumps. Good wears resistance, can serve you for a long time.
  • 【Compatibility】Suitable for most 4" (100mm) or 4-1/2" (115mm) angle grinders and manual grinders. This product can meet your various need, you can cut into the wood directly like butter, and you can use home and garden decorative accessories created by you to share your family. Imagine the joy of your child's face when playing with wooden toys carved by his father.
  • 【Replaceable】If your angle grinder chain saw wheel attachment become dull during work, you no longer need to stop working. We provide replaceable chains that extend the life of the saw blade and save you from buying again time. Detailed replacement tutorials are included on the product packaging.
Rank No. #7
Grinder Wood Carving Disc, Abenkle Grinder Saw Disc for 4'' or 4"-1/2" Angle Grinder, Chainsaw Grinding Wheel Chain Blade Circular Plate 5/8' Arbor, Shaping and Cutting Disk with Fine 22 Teeth (100mm)
  • 【Dimension】 Grinder Saw Disc Arbor size : 5/8" (16mm)/Diameter: 4"/Fits For 4" (100mm) or 4-1/2" (115mm) Angle Grinder.Maximum speed (rpm) :14000; Wheel thickness:0.5cm;
  • 【Premium Material】This wood grinding wheel is made of premium Steel, 4 Inch Diameter Chain 22 Tooth Fine Cut Carving, Circular Saw Blades provides a smooth "finished" surface which is great for minimal sanding afterwards.Steel /Chains can be either be sharpened using a chain saw file or replaced as need be.
  • 【Safe】The wood carving disc is held in place between two steel plates which provides a secure grip for carving, Regardless of grain or knots the blade cuts through the material with ease to the user.
  • 【Function】 Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber with their speed when works,maximum speed up to 14000rpm /Great for curved work, like the inside of bowls, for fast waste removal.
  • 【Warning】: The wood carving disc for angle grinder is not advised to use the switch lock feature on any grinder. To prevent serious injury,amputations,and DEATH,read and follow all power tool instructions and all instructions included with this item
Rank No. #8
Grinder wood carving chain saw disc,4" chainsaw grinder wheel,  Anti-kickback Double Saw Teeth Shaper, Cutting, Shaping Chain Blade for 100/115 Angle Grinder,22 Teeth, 5/8' Arbor  
  • 🔼 Grinder wood carving chain saw disc,chainsaw grinder wheel ,  Anti-kickback Double Saw Teeth Shaper, Cutting, Shaping Chain Blade for 100/115 Angle Grinder,22 Teeth, 5/8' Arbor  
  • 🔼 Material: Steel 22 tooth design provides a smooth "finished" surface which is great for minimal sanding afterwards.4" Diameter;Maximum running RPM is 14,000 RPM
  • 🔼 Function:Cuts everything from hardwood,plastics and other soft materials.Grinder disc for wood carving,Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, 
  • 🔼 Safe: The chain saw blade is held in place between two steel plates which provides a secure grip for carving.Chains can be either be sharpened using a chain saw file or replaced as need be.
  • 🔼 Warning:It is not advised to use the switch lock feature on any grinder. Doing so may result in serious injury or even death.
SaleRank No. #9
Wood Carving Disc (4 Inch, 22 Teeth, Replacement Chain) & Tungsten Grinder Shaping Disc (3-5/16 Inch Dia 5/8 Inch Bore) Anti-Kickback Double Saw Teeth Shaper,Angle Grinder Attachments for Wood Cutting
  • 😊 PROFESSIONAL POWER TOOL – Forget about manual woodcarving tools for shaping or sculpting! Make fine cuts, with this 4 inch and 22 teeth wood carving disc you would be able to enjoy your family with home decoration accessories created by yourself.
  • 👍 UPGRADE SHAPING DISC - Enlarging the recess of the shaping disc compatible with most general models of angle grinder 5/8 arbor. Made of good quality hard tungsten steel, stronger, more durable, wear resistance.
  • 💎 NEVER STOP SCULPTING – If your grinder chainsaw wheel attachment gets dull during work, simply use the replacement circlet in our set to replace the worn-out one. Save your time! Save your money!
  • 📜 DON'T GUESS HOW IT WORKS – Most sellers do not give an instruction manuals or directions. Customers may have problems on how it works. Don't be afraid! We had an operation manual to tell you how to install the disk on an angle grinder.
  • 🏡 WIDE APPLICATIONS – The angle grinder cutting wheel are suitable for non-metal materials, perfect for any kind of wood. Nice wood carving power tools for polishing, grinding and cutting. Good abrasion resistance, anti-blocking, can serve you for long time.
Rank No. #10
ABenkle Grinder Saw Disc, Wood Carving Disc 4inch/4.5inch Grinding Wheel Circular Saw Blade 22 Fine Tooth Chainsaw Grinding Disk for 100/115 mm Angle Grinder - Purple
  • [Dimension] Arbor size : 5/8" (16mm)/Diameter: 4" (102mm)/Fits For 4" (100mm) or 4-1/2" (115mm) Angle Grinder.Maximum speed (rpm) :14000; Wheel thickness:0.5cm;
  • [Material] Steel, 4 Inch Diameter Chain 22 Tooth Fine Cut Carving, Circular Saw Blades provides a smooth "finished" surface which is great for minimal sanding afterwards.Steel /Chains can be either be sharpened using a chain saw file or replaced as need be.
  • [Safe]The chain saw blade is held in place between two steel plates which provides a secure grip for carving, Regardless of grain or knots the blade cuts through the material with ease to the user.
  • [Function] Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber with their speed when works,maximum speed up to 14000rpm /Great for curved work, like the inside of bowls, for fast waste removal.
  • [Warning]: It is not advised to use the switch lock feature on any grinder. To prevent serious injury,amputations,and DEATH,read and follow all power tool instructions and all instructions included with this item.If you are not 100% satisfied,please contact the SELLER.We will make it a great shopping experience
SaleRank No. #11
Grinder Wood Carving Disc GRAFF Speedcutter 4-1/2-Inch, TCT Circular Saw Blade for Angle Grinder - Woodcarving Saw Blade 7/8" Arbor, Sculpting, Shaping and Cutting Wheel with 3 Teeth (115 mm)
  • Multifunction circular saw blade 4 ½ Inch for angle grinder is an ideal solution for wood carvings, sculpting and shaping. This woodworking tool has 3 tungsten carbide teeth and antikickback design, and it is safer than 6 teeth wood carving disc. This is one of the most universal wood carving tools and angle grinder attachments. ✷This wood grinding wheel was certified by MPA Hannover.✷
  • This grinding disc 4 ½ Inch has unique tungsten carbide semi-circular tooth shape and because of this can replace wood carving tools set. It can be used as grinder shaping disc, sculpting wheel and cutting wheel and also circular saw blade.
  • Angle grinder wood cutting wheel GRAFF Speedcutter does not overheat even after continuous work. This grinder disc ensures safe work because the carving blade creates reasonable radial resistance value at high rotation speed rates 13200 RPM. This angle grinder wood saw disc (wood carving chain disk) has a special design in which the disc body has feed stop. Working with our woodcarving disc is safer than with wood carving chainsaw blades and simple saw blades.
  • GRAFF Speedcutter is a multipurpose wood cutter (wood carving wheel). This circular saw blade is intended for carving not only wood but also plywood, laminated flooring, parquet (hardwood), plasterboard, MDF (hardboard), chipboard, etc.
  • This angle grinder cutting wheel provides smooth grinding and carving. One more advantage is the right grinder blade diameter – 4 ½ Inch and 5 Inch allowing easy multipurpose work on a variety of materials.
SaleRank No. #12
Grinder Wood Carving Chain Disc Angle Grinder Disc IRmm Chain Saw Plate 22 Tooth, 5/8" Center Hole for Shaping Cutting & Engraving of Wood, Plastic, Ice & Hard Rubber (4 inch)
  • Arbor:5/8inch (16mm) ,14000rpm Max
  • Fits most 4- and 4-1/2-inch angle grinders.
  • Grinder Disc Chainsaw Cuts in any direction while making smooth cuts,takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber.
  • Regardless of grain or knots the blade cuts through the material with ease,especially useful for cutting floor and wall openings.
  • 22 tooth design provides a smooth "finished" surface which is great for minimal sanding afterwards.Chains can be either be sharpened using a chain saw file or replaced as needed.
Rank No. #13
7/8" Arbor Wood Carving Chain Disc – for All 4-1/2 or 5 Inch Angle Grinders with Extra Chain Packed in a Cool Box 4 Inch 22 Teeth Saw Blade Cutting Grinding Shaping Attachment Circular Chainsaw Wheel
  • ✅ FAST STOCK REMOVAL – Forget about manual woodworking tools for initial shaping or gouging! With this saw blade you can cut right through wood like butter. Use the 7/8" center hole disc instead of 5/8", for working with the 4-1/2 or 5 inch angle grinders, because the first one attaches much more better to the respective grinders, as is required by their construction.
  • ✅ DON'T STOP SCULPTING – If your grinding chainsaw wheel attachment gets dull during work, you can quickly replace the chain with the extra circlet that comes with this wood cutter disc. In this way, after 1-2 minutes you can continue work and sharpen the worn out circlet later.
  • ✅ PERFECT GIFT BOX – This circular chainsaw blade comes in a cool storage carton box with a great design for storing your wood carving chain wheel when you do not using it. Storing the unpackaged disc, for example in a drawer with other things, can cause the cutting edges of the chain teeth to blunt.
  • ✅ PROFESIONAL POWER TOOL – In order to create a premium product with a great value we added a laser-printed tooth icon on the top disc plate. This icon allows you to detect incorrect installation of the circlet, when the cutting direction of the chain does not match the direction of rotation of the disc, and helps you avoid damage to the chain.
  • ✅ DON'T GUESS HOW IT WORKS – Without an instruction manual many customers had problems with chainsaw wheels because they didn't know how to use it properly. We have created an instruction sheet in which you will find how to install the disc on the grinder, how to replace the chain and also the main protection measures.
Rank No. #14
Grinder Disc Chain Plate, 4/4.5 Inch Grinding Wheel Disc and 22 Tooth Fine Cut Carving Chainsaw Blade Set For 100/115 mm Angle Grinder,5/8 Inch Grinder Center Hole,Woodwork Circular Saw Blades
  • Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber with their speed and maneuverability.
  • [Function]---Angle Grinder Disc Chainsaw takes the muscle work out of cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber with their speed when works,maximum speed up to 25000rpm /Great for curved work, like the inside of bowls, for fast waste removal.
  • 22 tooth chain design provides a smooth surface that is very useful for the minimum sanding.
  • [Efficiently]---The chain saw blade is fixed between the two steel plates, which provide a firm grip that can be easily cut through the material, whether textured or knotted.
  • This grinder chain disc is great for curved work, like the inside of bowls, for fast waste removal.
Rank No. #15
Wood Carving Disc for Angle Grinder 4-1/2-Inch, T TOVIA 3 Teeth Circular Woodcarving Saw Blade, Multipurpose Wheel for Cutting, Sculpting and Shaping, Stump Log Grinder Attachment with 7/8" Arbor
  • Three tungsten carbide teeth ensure safe work with the blade by creating the acceptable value of radial resistance at high rotation rate;
  • Special anti-kickback design. Designed especially for working at high RPM rates (up to 12 200 RPM).
  • No overheating of the blade even during continuous work;
  • Smooth grooving with a clean cut is ensured by the unique shape of the teeth;
  • Multi-purpose cutting for wood board,MDF,chipboard,laminate flooring,plasterboard,plywood.Remove material quickly and fast.Wood carvers CHOICE.
Rank No. #16
King Arthur's Tools Original & Patented Lancelot 14 Tooth Carving Disc - 4" (100mm) Dia. X 7/8” (22mm) Bore - Fits 4 and 4 1/2" Woodworking Angle Grinder - Attachment for Milwaukee, Fein 47814
  • 3/8" (0 Fits most standard 4 1/2", metric 115mm and 125mm angle grinders.
  • .375 or 9.25mm) pitch teeth
  • Depth of cut is 1-3/16" (30mm).
  • Teeth can be easily sharpened with a 5/32" (4mm) file
  • # 45814 and # 41414 can be used individually or in tandem with any other same center hole KAT blade
Rank No. #17
Tinmovys 2pcs Wood Carving Disc 4 Inch Grinder Chainsaw Wheel for 100/115 mm Angle Grinder, 22 Teeth Double Saw Blade, 5/8" Arbor, Anti-kickback Woodcraft Tool
  • Chain Saw Blade: 22 Teeth; Arbor Size - 5/8" (16mm); Diameter - 4" (102mm); Maximum Speed - 13000 RPM; Wheel thickness - 0.2" (0.5cm); Fits for 4" (100mm) or 4-1/2" (115mm) Angle Grinder, cuts in any direction
  • Advantage: Make fine cuts, with this 4 inch and 22 teeth Circular Saw Blade you can cut right through wood like butter, and be able to enjoy your family with home and garden decoration accessories created by you
  • Power Double Blades: Chain saw blade securely held in place between two steel plates. Firm center is for angle grinder while edges will act as blade for fast waste removal. Must use universal nut/caulking gel for dual blades holding the discs together
  • Wide Application: Cut everything from hardwood, plastic and other soft materials. Great for curved work, cutting sculpting, gauging and channeling
  • Buy with Confidence - Thank you so much for your great support on us. Product quality and customer satisfaction is our top priority. If you have any questions please contact us, we will provide the best service as we can
Rank No. #18
Angle Grinder Disc 22 Tooth Chain Saw Carving Blade Plate 4" for Wood Cutting Chainsaw Wheels Cutter 100/115mm Circular Woodworking Engraving Tool
  • ▲Our 22 tooth design provides a smooth "finished" surface which is great for minimal sanding afterwards.
  • ▲ Great for curved work, like the inside of bowls, cutting discs, resin metal cutting wheels for plywood, melamine, wood, stone, metal, plastic cutting and fast waste removal.
  • ▲ Fits For 4" (100mm) or 4-1/2" (115mm) Angle Grinder.
  • ▲ Provides a secure grip for carving. Regardless of grain or knots the blade cuts through the material with ease to the user.
  • ▲ Warm Tip: when Using the Angle Grinder Protective Gloves is needed; Before using Please make sure it is installed well !
SaleRank No. #19
LEATBUY 2pcs Circular Saw Blade Cutter Tool, Cordless Saw Blades Cutter for 100/115 Angle Grinder, Disc Plunge Wood Cut Wheel, Chain 22 Teeth Fine Cutting Set Carbide Chop Saws
  • ❀{Simple to Use}--Fits For 4" (100mm) or 4-1/2" (115mm) and 125mm metric angle grinders. Squire is a smaller version. These blades are used on disc or angle grinders.
  • ❀{Wide Application}--Great for curved work, like the inside of bowls, cutting discs, resin metal cutting wheels for plywood, melamine, wood, stone, metal, plastic cutting and fast waste removal. Chains can be either be sharpened using a chain saw file or replaced as need be.
  • ❀{Middle Hole Sizes}--Squire are available with three center hole sizes. For the North American market the two most common are 5/8" (16mm) and 7/8" (22mm). For other worldwide markets with metric angle grinders they are 14mm and 22mm (7/8").
  • ❀{Chain Features}--The chain consists of consecutive left and right teeth,All our blades have twice the amount of regular teeth resulting in the blade powering its way through the hardest of woods and other soft non ferrous materials. combined with the speed of the angle grinder rotating at between 10,000 to 13,000 rpm's.
  • ❀{Safety to Use}--Should the blade hit a nail or piece of wire in wood, on most occasions it will cut through the obstruction. If not, the impact will cause the chain to stop while the discs rotate giving the user a warning to stop the angle grinder. This is a major safety feature which virtually eliminates kickback and binding. All our chains are easily sharpened with a 5/32" (4mm) chain saw file.
Rank No. #20
FUNTECK 4 in.Grinder Disc 22-Teeth Steel Chainsaw Blade Wood Carving Disc for Cutting and Shaping, 5/8” Arbor, Fits 4” or 4-1/2” Angle Grinders
  • The 22-teeth chain saw cutter fits most 4 in.(100 mm) , 4.5 in.(115 mm) and European 125 mm angle grinders with 5/8 in.(16 mm)center holes.
  • The 4 in.(100 mm) Dia chainsaw blade is housed between 2 stainless steel discs, which provides a secure grip for carving. Regardless of grain or knots, the blade cuts through the material with ease.
  • This wood carving disc is not as aggressive as the 14 and 12-tooth and leaves a finer finish but you will be amazed at the power and control.
  • It can power its way through the hardest of woods and other soft nonferrous materials. Excellent for cutting, carving, removing and sculpting of wood, plastics, ice and hard rubber.
  • Chains are easily sharpened with a 5/32 in.(4 mm) chain saw file and the chain is replaceable.

Last update on 2020-10-05 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Chainsaw Grinder Disk for our consumer to review. The reports above show ratings of the best overal, best cheap Chainsaw Grinder Disk to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.