The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Car Hood Pistons of 2020 – Consumer Guide & Reviews

Rank No. #1
ECCPP Lift Supports Front Hood Struts Gas Springs Shocks for 2007-2011 Toyota Camry Set of 2
  • FITMENT - Lift supports struts rods gas spring for 2007 2008 2009 2010 2011 Toyota Camry Compatible with 6333 lift support strut
  • QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications
  • FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head
  • EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation
  • NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please contact us if you have any question
Rank No. #2
Mercedes r170 slk 230 320 Hood Shock Absorber strut engine lid lift support gas spring piston lifter
  • Hood Shock.
  • Brand new. Premium Quality.
  • Part # 1708800229
  • Please see description below for compatible cars.
Rank No. #3
Apexstone 2pcs 100N/22.5LB 15inch Gas Spring/Prop/Strut/Shock/Lift Support with L-type Mounts
  • FORCE:22.5 Lbs/100 N(Per Strut),LENGTH(Center-to-Center):14.96 inch(380 mm),COMPRESSED LENGTH(Center-to-Center):9.06 inch(230 mm).Bracket Holes' Size: 8 mm(diameter),8 mm(diameter),10 mm X 8 mm(Length X Width).WORKING TEMPERATURE: -10 ℃ - 40 ℃/14℉-104℉
  • SET OF 2 IN THE PACKAGE:It could hold open 22.5 lb individually or together for around 45lb on any object such as car lid ,trailer,bed,RV under-bed storage, trap door etc.
  • CAUTIONS: NO INSTRUCTIONS! NO SCREWS! If you are not sure the item is okay for your project , please contact us before placing order
  • HOW TO INSTALL&ADJUST IT:As the Upper Mounting Point ,it should be 4-5 inch,5.5 inch maximum towards the hinge on the lid.While If you want to adjust the Upper Mounting Point,just do as the Product Descripition shown ,or Click "Ask Seller" Besides Your Order for In-time Assistance
  • 100% SATISFACTORY WARRANTY: We offer 1 year 100% satisfactory warranty,if unfortunately our gas strut did not work well ,please kindly contact us for exchange, refund or return
Rank No. #4
2Pcs Gas Charged Front Hood Lift Supports Struts Shocks Springs Props Compatible With Lexus GX470 2003-2009 / Toyota 4Runner 2003-2009
  • Please check product description carefully before buying.
  • Vehicle Location:Hood
  • Extended Length A [in] 17.94,Compressed Length B [in] 11.19,Stroke C [in] 6.75
  • Exact fit original equipment design ensures easy installation and precise operation
  • Please carefully read the title to insure you are ordering in the correct supports & Quantity
Rank No. #5
A-Premium Hood Gas Charged Lift Supports Shock Struts Replacement for Honda Accord 2003-2007 2-PC Set
  • 【Directly Fit】OE replacement lift supports, easy fit. Easy to install with simple tools in just minutes. No special tools required for installation.
  • 【Vehicle Fitment】Compatible with Honda Accord 2003-2007
  • 【Reference Number】74195SDBA02, 74145SDBA02, PM2024, SG326013, 4157
  • 【Function】High strength leak-proof piston seall; Superior rod finish resists corrosion; Easy lifting and reduce closing effort
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time
Rank No. #6
13.39 IN 2Pcs Front HOOD Struts Lift Supports Shock Gas Spring Prop Rod Compatible With FORD 1998-2011 CROWN VICTORIA / 1998-2011 GRAND MARQUIS / 2003-2004 MARAUDER (Note: Sedan 4-Door)
  • Pls check our production description to make sure our lift support fit your vehicle
  • Extended Length:13.39[Inch] Compressed Length:8.31[Inch] Pounds Of Force:121[LBS]
  • Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications
  • NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new
  • Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to automotive O.E. performance and quality specifications. Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required. Exact replacement, engineered for your application. Rust-resistant piston rod extends product life. Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles.
Rank No. #7
25.95 IN 2Pcs Front HOOD Struts Lift Supports Shock Gas Spring Prop Rod Compatible With TOYOTA 2005-2012 AVALON (Note:05 06 07 08 09 10 11 12)
  • Pls check our production description to make sure our lift support fit your vehicle
  • Extended Length:25.95[Inch] Compressed Length:14.76[Inch] Pounds Of Force:40[LBS]
  • Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications
  • NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new
  • Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to automotive O.E. performance and quality specifications. Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required. Exact replacement, engineered for your application. Rust-resistant piston rod extends product life. Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles.
SaleRank No. #8
2Pcs 22.38 Inch Front Hood Struts Lift Supports Fits 2007-2013 MDX - Shock Gas Spring Prop Rod
  • Pls check our production description to make sure our lift support fit your vehicle
  • Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications
  • Extended Length:22.38[Inch] Travel Length:8.75[Inch] Pounds Of Force:30[LBS]
  • NOTICE - We provide THREE YEAR WARRANTY for all our lift supports. Please contact us if you have any question.Designed For Original Equipment Fit And Performance,replaced with these in just a couple of minutes,your vehicle fully opens by itself like it used to do when new
  • Gently reduces the opening and closing speed as the lift support reaches the end of the cycle, reducing wear on joints and hinges. Manufactured to automotive O.E. performance and quality specifications. Restores the original opening and closing speeds of your hood, hatch or trunk. No special tools required. Exact replacement, engineered for your application. Rust-resistant piston rod extends product life. Easy lifting, reduced closing effort. Consistent lifting force through 30,000 cycles.
SaleRank No. #9
C1608054 20" Gas Prop Spring Strut 20 inch 100 Lb Per Shock C16-08054 for Camper Shell RV Bed Tonneau Cover Storage Box Basement Door Floor Hatch Window Lift Struts (Applicable Lid Weight 85-110LBs)
  • ✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!
  • ✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054; measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!
  • ✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc.;Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!
  • ✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc; Very Strong, do not buy them for the lid weight less than 80 pounds;
  • ✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product; If any questions before purchasing or dissatisfactions after purchasing or need installing/using guide, welcome to click "ASK SELLER" besides your order from ARANA for immediate assistance!
Rank No. #10
Strongarm 6153 Hood Lift Support, Pack of 1, black
  • Exact fit original equipment design guarantees correct fit and function
  • No special installation tools required
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
SaleRank No. #11
A-Premium Hood Lift Supports Shock Struts Replacement for Ford Explorer Sport Trac 2001-2005 2-PC Set
  • 【Directly Fit】OE replacement lift supports shock struts, easy fit. Easy to install with simple tools in just minutes. No special tools required for installation.
  • 【Vehicle Fitment】Compatible with Ford Explorer sport trac 2001-2005
  • 【Function】High strength leak-proof piston seal; Superior rod finish resists corrosion; Easy lifting and reduce closing effort
  • 【Note】Fit for Explorer Sport and Explorer Sport Trac Model , Not fit Explorer Model
  • 【Buy with Confidence】1 Year Unlimited-mileage Quality Guarantee---We extremely value your satisfaction and strive to provide you good shopping exprience. Any further question, please feel free to contact us at any time.
SaleRank No. #12
Front Hood Lift Support Strut Gas Shock Spring for Chevrolet Malibu 2008-2012 Saturn Aura 2008-2009 Sedan
  • YHTAUTO Affordable and Prime Lift Support Strut, Directly Fit
  • Replacement for Chevy Malibu 2008-2012 Sedan; Saturn Aura 2008-2009 Sedan
  • Location: Bonnet Hood, Front Side
  • Extended Length: 19.62 Inches; Compressed Length: 12.12 Inches
  • Reference Number: SG330094, 6166
Rank No. #13
ECCPP Lift Support Front Hood Replacement Struts Gas Springs Fit for BMW 525i 06 07 BMW 525xi 530xi BMW 528i 535i BMW 528i xDrive 535i xDrive BMW 528xi 535xi BMW 530i 04 BMW 545i BMW 550i M5 Set of 2
  • FITMENT - Lift supports Struts shocks for 04 05 06 07 08 09 10 BMW 525i 06 07 BMW 525xi BMW 530xi 08 09 10 BMW 528i BMW 535i 09 10 BMW 528i xDrive BMW 535i xDrive 2008 BMW 528xi BMW 535xi 04 05 06 07 08 09 10 BMW 530i 04 05 06 BMW 545i 06 07 08 09 10 BMW 550i BMW M5 Compatible with 6481 lift support
  • QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications
  • FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head
  • EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation
  • NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please contact us if you have any question
Rank No. #14
SCITOO Front Hood Lift Supports Struts Gas Springs Shocks fit 1997-2001 Lexus ES300,1997-2001 Toyota Camry
  • COMPATIABLE VEHICLES - 4478 SG404016 lift support strut rod gas spring shocks for 1997 1998 1999 2000 2001 Lexus ES300,1997 1998 1999 2000 2001 Toyota Camry front hood
  • HIGH QUALITY - Premium quality gas lift support - Brand New High Quality OEM Replacement HIGH QUALITY - Premium quality gas lift support - Brand New High Quality OEM Replacement
  • FEATURES - Multi-Lobe Seal lift supports are more tolerant to vibration and extreme temperature, corrosion resistant piston rod extends product life
  • EASY INSTALLATION - OEM quality design ensures easy installation and precise operation, no special tools required for installation
  • GUARANTEE - 100% brand new and tested to meet or exceed OEM specifications. One Year Warranty available for our this item. Accept return and refund to ensure your benefit. Please contact us firstly if you have any question about our product
SaleRank No. #15
ECCPP Lift Supports Front Hood Struts Gas Springs for Ford Expedition 1997-2006 for Ford F-150 1997-2004 for Ford F-150 Heritage 2004 for Ford F-250 1995 1997-2004 Set of 2
  • FITMENT - Gas struts shocks lift supports for Ford Expedition 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 for Ford F-150 1997 1998 1999 2000 2001 2002 2003 2004 for Ford F-150 Heritage 2004 for Ford F-250 1995 1997 1998 1999 2000 2001 2002 2003 2004 Compatible with 4478 SG404016 lift support strut
  • QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications
  • Vehicle Location: Hood, Placement on Vehicle: Left Right Front,Actual Extended Length: 13.30", Actual Compressed Length: 9.40"
  • EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation
  • NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please contact us if you have any question
Rank No. #16
4104 Lincoln Town Car 1982-1986 Hood Lift Supports Strut, Set of 2
  • Front Hood Left & Right Lift Supports
  • Exact Fit- Direct OEM Replacement Ensures Easy Installation
  • No Special Tools Required for Installation
  • Self Cleaning Piston Assembly
  • Limited Lifetime Warranty
Rank No. #17
ECCPP 2pcs Front Hood Lift Supports Struts Rods Shocks for 2001-2007 Toyota Sequoia, 2000-2006 Toyota Tundra
  • FITMENT - Lift supports struts rods gas spring for 2001 2002 2003 2004 2005 Pontiac Aztek Compatible with 4379 lift support strut
  • QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications
  • FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head
  • EASY INSTALLATION - Easy to install with simple hand tools in just minutes - no special tools required for installation
  • NOTICE - Please check the description and compatibility chart before your purchasing. We provide ONE YEAR WARRANTY for all our lift supports. Please contact us if you have any question
SaleRank No. #18
2 Pcs Front Hood Lift Support Strut Gas Spring Shock for 2007-2011 Toyota Camry 6333
  • Placement on Vehicle: Front Hood Left and Right
  • Fit For:2007 2008 2009 2010 2011 Toyota Camry
  • Reference Number:6333,PM1102,5345006042,5345006041,9804VL,24761,10030744,550017,5344006050
  • Extended Length[in]:27.40 Compressed Length[in]:15.9
  • Exact Fit,OE Quality Design Ensures Easy Installation and Precise Operation
SaleRank No. #19
FASONLA GAS STRUTS, 300N/67LB FORCE EACH GAS STRUT LIFT SUPPORT, 15" LENGHT 2PCS SET of GAS SPRING/SHOCKS/PROP with L-TYPE MOUNTS, LIFT SUPPORT for CAR, CABINET & ANY 65LB-120LB OBJECTS (15 inches)
  • ✔️ POWERFUL STRUT: Your Gas Springs are powerful, prop open any medium to heavy object such as a car lid or barrier for hands free convenience, with easy fittings to any surface just attach, lift and your gas spring lifts and holds open any medium to heavy object. CAUTION anything under 65lb of weight should not be fitted with your gas springs, these powerful springs is difficult to be compressed by hand.Not Suitable for toy-chest or Windows.
  • ✔️ SET OF 2 - 65 to 120 LBs TOTAL WEIGHT: Your gas springs come in a set of 2, able to hold open 65lb of weight each use individually on medium weighted objects or together for a combined hold strength of 120lb or more.
  • ✔️ 15” TOTAL LENGTH: Each of your gas springs when fully extended is 15” in length and when fully compressed is 9” in length giving you the option to have 90-130 degrees of opening depending on the position of your gas springs.
  • ✔️ EASY FIT & REMOVAL: Your gas springs come with 2 L-plates each at top and bottom with 4 screw holes and screws included, simply screw into any soft surface or pre drill a guide hole in any tough surfaces like wood, metals. The High quality materials included mean your screws can easily be fit and removed for any adjustments.
  • ✔️ BRAND GUARANTEE: If you are looking for top quality Gas strut, this set of 2 Gas Struts is just what you need. If unhappy with the purchase, please let us know for a free replacement or full refund, no questions asked. Click ‘Add to Cart’ now!
Rank No. #20
Strongarm 4026PR Hood Lift Support, Pack of 2, black
  • Exact fit original equipment design guarantees correct fit and function
  • No special installation tools required
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability

Last update on 2021-06-02 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Car Hood Pistons for our consumer to review. The reports above show ratings of the best overal, best cheap Car Hood Pistons to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.