The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Boat Trailer Fender Lights of 2020 – Consumer Guide & Reviews

Rank No. #1
Partsam 4 Amber + 2 Red Universal Smoked Side Marker Trailer Light Surface Mount 2 Diodes, Sealed Mini Led Marker Clearance or Identification Lights, Mini Side Fender Lights (2.54" x 1.06")
  • Partsam (2xRed+4xAmber side markers) in smoke lens; Waterproof & Sealed Light Lens.
  • Function as led marker light, auto side lamps, clearance Lamps, side marker or identification light,Trailer Light etc.
  • Universal fits for 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Boat Lorry Bus etc.
  • Easy installation: White wire is the GROUND. Two-wire design includes both lead wire and ground wire for mounting to all surfaces.
  • Partsam is one of the largest automotive aftermarket marker lights providers in North America. You can find all the marker lights you need in Partsam!
Rank No. #2
Partsam Submersible Under 80" LED Trailer Light Kit,Square Stop Turn Tail RV Truck Lights w/Wire &Bracket,Red/Amber Side Fender Marker Lamps,3rd Brake ID Light Bar for Camper Truck RV Boat Snowmobile
  • Package included: this 12v led trailer lights kit has verything you need, 2Pcs square combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15 Inch Trailer 3rd brake identification light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once;
  • Multi Functions: Function as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar;
  • High Btightness: 15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side; 19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator; Advanced LED combination lights with better heat distribution, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather;
  • Waterproof: The square trailer lights kit is completely sealed, it mean no water can enter inside to damage the circuit board. The screws have been removed from the lampshade to prevent water invasion better, effectively protects the tail light from sand, dust, dirt, water or snow;
  • Widely Used: Ideal for most vehicles equipped with 12V power supply such as trailers, campers, trucks, Dump Truck, snowmobile, tractors, semi-trailer, bus, boat and other vehicles with a width of 80 inches (more or less);
Rank No. #3
Partsam 4x Waterproof Amber/Red 4LED Side Marker Light for Trailer Truck Boat DC12V - Slim Waist
  • 4" L; Sealed, waterproof; surface mount; 2-wire; 4 LED Fender Marker light
  • Sealed, Long LED Trailer Clearance and Side Marker Light, 4-Diode - Amber/Red
  • This thin-line, sealed, rectangular LED light can be used as a clearance or side marker light
  • The two-wire design includes the lead and ground wires to mount to any surface.
  • Light Size:3.85"x1.2"x0.8"; Light Size with Base:4"x1.3"x1"; Hole to Hole Size:2.2" Note: NOT the TWO PRONG type, these are hardwired into the vehicle(Black is negative and Red positive); SCREWS ARE INCLUDED;
SaleRank No. #4
4Pcs 2 LED Side Marker Light 2.5" Oval Trailer Truck Fender Light Surface Mount Little Boat Marine Led Lights RV Camper Accessories, IP67 Waterproof DOT Certified [2 Amber and 2 Red, 12V]
  • 【Fitment】- (2Red+2Amber) LED marker lights, Universal to most of car trucks, trailers, horse trailer, travel trailer, boat trailer, RV, camper, motorhome etc.
  • 【LED Light】- Side marker LED clearance lights, each light with 2 LEDs inside; 2.5" Oval. Used as Led Marker light, Auto side Lamps, clearance light, identification light, trailer Light etc.
  • 【High Quality】- Every Kit Features Super Strong ABS Plastic Lenses which have been UV treated so they will not fade from prolonged exposure to sunlight and weather elements. Sealed & waterproof assemblies. IP67 Waterproof DOT Certified
  • 【Easy To Install】- Hardwired with 2 Wires: Black is Negative and Red is Positive.
  • 【Quality Service】-If the product fails, cracks, stops working or any other problems, simply contact us for a free replacement. Or if you get any problems, we will give you a satisfactory response within 12 working hours!
Rank No. #5
2pc 7" Amber + Red LED Trailer Fender Light Set [DOT Approved] [SAE P2] [IP67 Waterproof] Trailer Clearance Marker Lights for Boat Utility Trailer Hauler Car
  • SAVE MONEY - Save yourself time and money with this combination red and amber fender light. Instead of installing, wiring and maintaining two separate clearance lights, chose our one-and-done combination LED fender light.
  • CABLE MANAGEMENT - The extended cable housing allows you to place your lights farther out for better visibility without compromising on protection for your wiring.
  • DOT COMPLIANT - Our clearance lights are DOT FMVSS 108 compliant and meet the requirements for build quality, durability, and visibility. So you can feel confident that you're installing a light that is bright, safe, and legal.
  • WATERPROOF - Trailers see the worst of the weather, and dirt, snow, water, and wind can take a toll on weak trailer lights. Our lights are IP67 rated for full submersion, and are the ideal choice for boat and utility trailers that see a lot of water.
  • EASY AND SECURE - With the included 60" of wiring you won't need to worry about buying extra wire. And because our lights are secured by 6 mounting screws you can be confident that once you install it, it's not going anywhere.
Rank No. #6
Partsam 4Pcs Mini 2.5 Inch Trailer Led Side Fender Marker Clearance Lights 2 Diodes Surface Mount, Sealed Mini Rectangular Rectangle Boat Marine Led Courtesy Lights Waterproof (2Amber+2Red)
  • Partsam 4 Pieces (2Red+2Amber) 12v DC Side Marker trailer Light Mini-Sealed LED Surface mount design; 2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Surface mount to trailer. 2-Wire design. Screws are not included;
  • These Mini Led Trailer Lights are universal. Generally people use them as clearance, side marker or identification light. We also get feedbacks from our customers using them as strobe lights or turn signal lights by connect with the switch or relay. Also some put them on motorhome as running lights, or install them in the truck step running boards as side markers or underglow lights etc.;
  • Size and Brightness: 2.54" x 1.06" x 0.7" and the center to center hole distance: 1.8"; 80 lumen each light with 2 pcs High Quality LED Diodes; Sonically sealed, Waterproof lens and Housing in a single unit. All-weather housing and durable lens protect against corrosion;
  • These surface mount lights have 2 holes one in each. Because of the placement of the leads and how the lamp is mounted, You will need to drill holes for the screws AND for the wire leads to surface. The screw actually hold both the backing and the lens cover on, making it sealed and watertight. Also If you install them vertically they are more visible than if you install them horizontally;
  • Surface Mount with two free end wires: Black is hot and White is ground, the wires come out of the back of the light. Two-wire design includes both lead wire and ground wire for mounting to all surfaces; Universal fits for 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Motorcycles Boat Lorry Bus etc. 1 YEAR WARRANTY GUARANTEED;
Rank No. #7
2pc 5" Amber + Red LED Trailer Fender Light Set [DOT Compliant] [SAE P2] [IP67 Waterproof] Trailer Clearance Marker Lights for Boat Utility Trailer Hauler Car
  • SAVE MONEY - Save yourself time and money with this combination red and amber fender light. Instead of installing, wiring and maintaining two separate clearance lights, chose our one-and-done combination LED fender light.
  • CABLE MANAGEMENT - The extended cable housing allows you to place your lights farther out for better visibility without compromising on protection for your wiring.
  • DOT COMPLIANT - Our clearance lights are DOT FMVSS-108 compliant and meet the requirements for build quality, durability, and visibility. So you can feel confident that you're installing a light that is bright, safe, and legal.
  • WATERPROOF - Trailers see the worst of the weather, and dirt, snow, water, and wind can take a toll on weak trailer lights. Our lights are IP67 rated for full submersion, and are the ideal choice for boat and utility trailers that see a lot of water.
  • STYLE - Just because it's a trailer fender light designed for superior functionality and durability doesn't mean that it can’t look good too. With amber and red lenses housed under a clear body and lens, this light looks as good as it performs.
Rank No. #8
WoneNice 12V LED Low Profile Submersible Trailer Tail Light Kit, Rectangle LED Trailer Lights with Wiring Harness Combined Stop, Tail Lights, Turn Function for Boat Trailer, 12V
  • Complete Trailer Light Kit: This Trailer Light Kit includes 2 combination tail and brake/turn signals lights, 2 amber LED marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag, everything you need to do the install included.
  • Waterproof and Submersible trailer lights: The circuit board is completely sealed and IP68 waterproof, which protects the board from short circuit even soak in the water, it can work long hour in rainy days, fog day or snow day, it is totally submersible(Test Underwater light for 24 hours).
  • Super clear and brighter SMD 5050 lamp beads produces a super light, no glare, Up to 50,000 hrs life expectancy
  • Compliant with DOT standards, perfect replacement trailer lights for RV, tractors, canoes,towing vehicle, truck, trailer, boat, bus, Lorry, Van, caravan, snowmobile etc
  • Product Size: 8*2.95*2.83 inches, 25ft wiring harness, so that it is long enough to reach end of trailer,instruction included.
Rank No. #9
Submersible LED Trailer Lights Kit Waterproof Square Stop Turn Tail Truck Lights w/Wire Harness & Bracket Red/Amber Side Fender Marker Lamps 3rd Brake ID Light Bar for Trailer Boat Camper Snowmobile
  • PACKAGE INCLUDES: Includes 2 square combination tail lights, 6 side fender marker lights, 3rd brake identification light bar, wiring harness, license plate bracket, mounting hardware. Provides you with great convenience to upgrade your trailer lights at once.
  • BRIGHT & ENERGY-EFFICIENT: Advanced LED combination lights with better heat distribution, no glare, brighter and more energy-efficient than halogen bulbs. Guarantees reliable visibility and safety even in inclement weather.
  • PRACTICAL FUNCTIONS: Functions as running light, stop light, brake light, turn signal light, reverse light, flash light, rear reflex reflector, side marker light, side reflex reflector, license plate illuminator, clearance Light, identification light bar.
  • WATERPROOF: Adopts ultrasonic welding technology for better waterproof performance. The screws have been removed from the lampshade to prevent water invasion better, effectively protects the tail light from sand, dust, dirt, water or snow.
  • UNIVERSAL FIT: Ideal for most vehicles equipped with 12V power supply such as trailers, campers, trucks, Dump Truck, snowmobile, tractors, semi-trailer, bus, boat and other vehicles with a width of 80 inches (more or less).
Rank No. #10
Partsam 2Pcs 4 Inch Round Double Face Star Led Pedestal Lights Mount Stop Tail Brake Turn Signal Lights Trucks Semi Trailers Tractors Fender Mount Lights Lamps
  • This set features 2pcs 4-1/8" Diameter round Pedestal Mount, Dual Face Trailer Parking and Turn Light. You're going to have amber on one side and then red the other. The amber and red round trailer light is going to serve 2 functions. You're going to have the amber for parking and your turn signal and red side is going to function for stop, turn, and tail light.
  • Dual face design includes rear-facing red lens and forward-facing amber lens; The wiring design is going to feature 3 wires, black is the ground and the other two wires for either side
  • About Pedestal mount trailer lights: It is installed standing up from the mounting point. And mounting hardware, typically one or two bolts, is used to secure the light to the trailer.
  • Waterproof: The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
  • Application: Trucks, Trailers (Boat, Box, Camper, Transport),4WD, Caravans, Motor Homes, Boats / Marine, Earthmoving & Mining Equipment Forklifts, Buses and Coaches, Camping, Fishing
Rank No. #11
Partsam Universal Red/Amber Surface Mount LED Side Fender Marker Lights, Sealed Mini LED Side Marker Clearance Identification Lights, 2 Wire, 2 Diodes, 2.54 x 1.06 (Pack of 8)
  • Partsam (4Red+4Amber) Mini-Sealed LED Surface mount design in for clearance, side marker or identification light.
  • These are universal.Generally people use them as clearance, side marker or identification light. We also get feedbacks form our customers and they use them for trailer lights 2 for brake lights and two for tail light on each side. Also some put them on motorhome as position lights ...
  • Brightness: 80 lumen each light with 2 pcs High Quality LED Diodes; Universal fits for 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Boat Lorry Bus etc.
  • 64mm x 26mm x 18mm (2.54" x 1.01" x 0.7");the center to center dimension between the screw holes: 46mm (1.8")
  • Easy to install and HARDWIRED with Free end wire ( Black is Positive: White is Negative/ground ); the wires come out of the back of the light; Two-wire design includes both lead wire and ground wire for mounting to all surfaces;
Rank No. #12
Lumitronics RV Mini Thin Line 37 Series Sealed LED Marker/Clearance Light (Amber)
  • Design: Smooth, rectangular design for discreet and convenient attachment. Curved lighting design provides light in all directions to maximize visibility at night. Unique light housing helps disperse the light output evenly in all directions.
  • Features: Extenders on either side for easy attachment into light bracket . This light also features 3 individual LED’s producing and impressive 11.6 Lumens for clear visibility at night.
  • Durability: All-weather molded plastic housing and durable lens prevents corrosion. Features water tight housing for lighting while on the back of the light ground and lead connectors make attaching a breeze.
  • Installation: Easily mount this Mini Thin Line Sealed LED Marker/Clearance Light that both protects and conceals all components. Compatible with LUM-B57B.
  • Specifications: At 2.5 inches long and just over 1 inch tall this light is a great size for any RV. Lighting is constructed using a durable Polycarbonate plastic for years of fade and corrosion resistant use.
SaleRank No. #13
Amber Red 2.5" 2 Diode Oval LED Trailer Truck Clearance Light Side Marker Light 4PCS, Surface Mount Little Boat Marine Led Lights RV Camper Accessories (2 Amber+2 Red)
  • Partsam (2xAmber+2xRed) Oval 2.5" Side Marker/Clearance Lights Auto Side Lamps, screws not included;
  • Size: 2.5" x 1.0" x 0.7" and Hole to Hole distance: 1.8"(please check the dimensions before you buy, thanks); 2 leds/pc Trailer lighting, marker Light, Side Marker Assembly Replacements
  • Universal to most of car trucks, trailers, horse trailer, travel trailer, boat trailer, RV, camper, motorhome etc.
  • Can be used on any applications, left right front rear roof side; IT IS HARDWIRED, Red is positive and black is ground;
  • Used as Led Marker light, Auto side Lamps, clearance light, identification light, trailer Light etc.
Rank No. #14
Partsam 8pcs 2.5" Oval Side Fender Marker Light Red/Amber Clear Lens Universal Surface Mount LED Light, Truck Boat Trailer Sealed Mini Trailer Led Marker Clearance Identification Lights 2 Diodes
  • Partsam (4Red+4Amber) Clear Lens 12v DC Side Marker trailer Light Mini-Sealed LED Surface mount design
  • These are universal.Generally people use them as clearance, side marker or identification light. We also get feedbacks form our customers and they use them for trailer lights 2 for brake lights and two for tail light on each side. Also some put them on motorhome as position lights ...
  • Brightness: 80 lumen each light with 2 pcs High Quality LED Diodes; Universal fits for 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Boat Lorry Bus etc.
  • Easy to install with Free end wire ( Black is Positive: White is Negative/ground ); the wires come out of the back of the light; Two-wire design includes both lead wire and ground wire for mounting to all surfaces;
  • 64mm x 26mm x 18mm (2.54" x 1.06" x 0.7");the center to center dimension between the screw holes: 46mm (1.8"); Partsam is one of the largest automotive aftermarket marker lights providers in North America. You can find all the marker lights you need in Partsam!
Rank No. #15
Nifeida 8Pcs 2 LED Side Marker Clearance Light 2.5" Mini Trailer Truck Identification Fender Lamp Universal for 12V Boat RV Camper Truck DOT FMVSS 108 SAE P2 Surface Mount [4 Amber & 4 Red]
  • 【Universal Fit】For 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper RV Motorhome Boat Lorry Bus etc.; Function as clearance lights, side marker lights,trailer brake tail light or identification lights.
  • 【Top Grade LED】DOT FMVSS 108 SAE P2 Certificated. Adopt 2 upgraded Piranha LED,mini size but with high intensive light, low power consumption,long life time; Featured with 100,000 Hour rated LED life, can service you for years ahead.
  • 【Fine Workmanship】Design with ultrasonic welding and complete sealed, make it be effectively waterproof. UV treated amber/red lens, they will not fade from prolonged exposure to sunlight and weather elements.
  • 【Simple Installation】Two-wire design includes both lead wire and ground wire for surface mounting to all surfaces,such as trailer front rear side fender; Red is Positive: Black is Negative/ground. Screw is included.
  • 【100% Satisfication】We offer worry-free refund & 12month warranty, you can feel comfortable to buy and use. If you have any question, pls feel free to contact us, we will pleasure to solve the problem for you.
Rank No. #16
LEGO Adidas Originals Superstar 10282 Building Kit; Build and Display The Iconic Sneaker; New 2021 (731 Pieces)
  • Build and display one of the world’s most iconic sneakers with the LEGO adidas Originals Superstar 10282 model kit for adults
  • Packed with authentic details like the famous shell toe, 3 serrated stripes, adidas logo on the tongue and other Originals Superstar graphics
  • With shoelaces and authentic shoe box-style packaging, this LEGO model is a fun and realistic tribute to the original adidas sneaker
  • Looking for the best gifts for adidas fans? This model kit is ideal for anyone who loves streetwear collectibles, as well as adult LEGO builders looking for a project with a difference
  • Measures over 4.5 in. (12 cm) high, 10.5 in. (27 cm) long and 3.5 in (9 cm) wide
Rank No. #17
72x10-3/4 Aluminum Tread Plate Trailer Fender - Tandem Axle Teardrop (2-Pack)
  • .056" 3003 Aluminum Diamond Tread Plate
  • 72" x 10.75" x 20"
  • Made in USA
  • 1" Radius Lip
  • Teardrop Style
Rank No. #18
CE Smith 27660 Guide-ON BUNKBOARD 2' , Beige
  • precision metal stampings, fabrications and assemblies
  • 2'' x 4'' x 24" boards tilt to hug the hull and are covered with high grade marine carpet; boards are untreated Southern yellow pine
  • Height of 21'' with adjustment out to 13" from frame on each side
  • Can be mounted on top of frame for extra height
Rank No. #19
ECOTRIC Single Axle Trailers Fenders 12" Wheels Tires Skirt Boat Molded 300lbs (Set of 2)
  • √ Plastic Trailer Fenders 12" Tire Size Silver. Fits single-axle trailers w/ 12" diameter wheels. Top step: 6.9" wide.
  • √ High density polyethylene (HDPE) fenders with Injection molded. Front and rear steps: 4" long.
  • √ Impact resistant, 300 lbs. Capacity. Molded-in color is "scratch proof".
  • √ Dimension: 33-1/2" long x 7-1/2" wide x 8-3/4" tall. Please measure your own size before buying. The size of this product is shown in the picture.
  • If your items encounter any adaptation or anything-else problems, please give us the opportunity to replace the item/part. We provide technical support at any time, please feel free to tell us what we can do for you, we will reply in 24 hours.
Rank No. #20
Partsam 2PCS 3 LED Truck Trailer Front Rear LED Side Marker Lights indicator Lamp Sealed & Waterproof Surface Mounted Installation Amber 3.9"
  • Partsam (2xAmber) 12V 3.9 inch LED Front Rear Marker Lights, stainless screws for installation are included.
  • Function as Led Marker light, auto side Lamps, clearance light, identification light, trailer Light etc.
  • Waterproof & Sealed Light Lens, apply for left right front rear Roof Top clearance lighting.
  • Universal fits for 12V vehicles like Pickups Truck Trailers SUV van Caravan Camper Motorhome Boat Lorry Bus etc.
  • Light Size: 98mm x 31mm x 26mm (3.8'' x 1.2'' x 1''); 2 Wires Connection: Black is Negative and Red is Positive. NOTE: IT IS HARDWIRED, NOT PLUG AND PLAY;

Last update on 2021-11-06 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Boat Trailer Fender Lights for our consumer to review. The reports above show ratings of the best overal, best cheap Boat Trailer Fender Lights to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.