The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Autozone Ball Joint Press Rental of 2020 – Consumer Guide & Reviews

SaleRank No. #1
Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks (BL)
  • EASY OPERATION: Use the ORION MOTOR TECH Ball Joint Press Tool Set with 4WD Adapter to effortlessly remove press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm.
  • UNIVERSAL COMPATIBILITY: Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC, and Jeep vehicles).
  • PROFESSIONAL-GRADE DURABILITY: Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.
  • ALL-IN-ONE TOOL KIT: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
  • PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know.
Rank No. #3
Centric 610.42016 Ball Joint, Lower, Front
  • Nissan, Infiniti
  • 350Z, G35
  • Centric Offers complete onsite testing and quality control
  • Centric manufacturers quality parts for most vehicles sold in the US over the past 70 years
SaleRank No. #4
MOOG K6541 Ball Joint
  • Problem solver gusher bearing: Metal-to-metal design provides strength and allows grease to flow through the bearing surface for reduced friction and long life
  • Strong and durable: Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • Greaseable socket: Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • Keeps dirt and water out: Pre-installed dust boot shields socket components from wear-causing contaminants
  • Absorbs impact: Belleville preload washer helps keep the bearing package tight as the bearings wear
Rank No. #5
OEMTOOLS 37089 Ball Joint and U-Joint Press Set, Near-Universal Car and Truck Ball Joint Separator, Master Ball Joint Adapter Set for Upper and Lower Ball Joints
  • BALL JOINT PRESS KIT AND U JOINT TOOL: This ball joint tool installs and removes ball joints on most cars and light trucks with press fit ball joints; Ball joint removal tool may also be used as a u joint removal tool on most cars and light trucks
  • BALL JOINT PRESS ADAPTERS INCLUDED: Our ball joint separator kit comes with ball joint adapters needed to remove and install any upper and lower ball joint on 1967 to current 1/2 to 3/4-ton 4WD vehicles with the Dana 44 Series front axle
  • HEAVY DUTY BALL JOINT PRESS: The ball joint puller has a forged C body for toughness and durability, ensuring this ball joint removal kit and u joint press can handle any job; All parts in this ball joint tool kit have a rust-resistant finish
  • CONVENIENT BALL JOINT KIT STORAGE: This ball joint puller tool comes in a sturdy molded plastic carrying case for safe keeping and easy portability; Take this master ball joint service kit and u joint kit from job to job with this convenient case
  • COMPATIBLE BALL JOINT ADAPTER SETS: The ball joint press tool kit can be used with another ball joint adapter set for a near-universal ball joint press set; Our ball joint tool set is compatible with OEMTOOLS 27163, 27164, 27165, and 27166
Rank No. #6
Parodontax Active Gum Repair Toothpaste, Gum Toothpaste, Fresh Mint - 3.4 Ounces (Pack of 3)
  • Three 3.4-Ounce tubes of fresh mint flavored Parodontax Active gum repair toothpaste, gum toothpaste. 4 * 3 Pack
  • Gum Protection Toothpaste that helps reverse signs of early gum damage like bleeding gums
  • Gingivitis toothpaste that helps keep the seal tight between gums and teeth by killing bacteria at and along the gum line
  • Offers the same benefits of regular Anticavity toothpaste, preventing cavities and strengthening teeth
  • Fluoride toothpaste that promotes overall gum health
Rank No. #7
OEMTOOLS 37310 Master Ball Joint Installer/Remover Adapter Set, Ball Joint Removal Tool, Ball Joint Press Kit, Ball Joint Press Kit Heavy Duty
  • EXPAND REPAIRS: The ball joint remover tool set, to be used with the OEMTOOLS 27032 Ball Joint Press, provides you with several sizes of installing tubes, receiving tubes, and receiving cups; Remover/installer included
  • MORE VEHICLES: With the ball joint adapters set, you can work on a wider range of vehicles including pickups, vans, SUVs, and imports; Ball joint adapter kit works on many GM, Ford and Chrysler 2WD and 4WD pickups
  • DIFFERENT SIZES: The ball joint kit includes deep and shallow receiving tubes and receiving cups for many sizes of ball joints, giving you more versatility during your repairs
  • DURABLE: Made with ultra-strong steel, you won’t have to worry about the ball joint separator kit bending, breaking, or snapping; You’ll have this ball joint removal kit for years to come
  • EASY ORGANIZATION: All 14 tools in the ball joint remover and installer kit fit nicely inside a super durable blow mold case; Allows you to transport the ball joint tools kit from job to job without hassle
Rank No. #8
Orion Motor Tech Pickup Truck Ball Joint Press Adapters Tool Kit, U/Ball Joints Removal Separator Compatible with Most Ford F-Series, Chevy Silverado, Dodge Ram and GMC Sierra, Works w/C-Frame Press
  • Specially Designed to remove and install press-fit upper ball joints & lower ball joints as quickly and easily as possible, without needless time-consuming removal of control arms. This master adapter kit also works for many other press-fit components such as bushings, U-joints, and truck brake anchor pins.
  • Professional-Grade Quality & Durability. This OMT master adapter set is made from forged, heat-treated, and machined carbon steel with a black-oxide finish for maximum strength and longevity, resisting rust and other corrosion. This strength allows its adapters to safely remove even severely rusted-out or corroded parts.
  • Conveniently Includes 8 receiving tubes, 2 receiving cups, 2 installing tubes, 1 plug bolt, 1 removal/installation tool, and instruction manual. This ball joint service adapter set is easily organized, stored, & carried in its heavy-duty 14.5″×12.6″×4.3″ (37×32×11 cm) blow-molded plastic case with handle.
  • Compatible with most Chevrolet, Chrysler, Dodge, Ford, GMC, Jeep, and Plymouth trucks, vans, minivans, and SUVs up to 1997 including Chevy Blazers; Dodge Rams and Ramchargers; Ford Broncos, F-150s, F-250s, F-350s, and Rangers; and Jeep Cherokees, Comanches, & Wagoneers.
  • Orion Motor Tech provides outstanding quality and customer support. If you are not satisfied with this product or have any questions, please feel free to let us know.
SaleRank No. #9
Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
  • ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
  • PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
  • ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
SaleRank No. #10
Powerbuilt 23 Piece Ball Joint and U Joint Service Set - 648617
  • Harm Bal/ crank PULLEY P
  • Tool solutions for most all situations
  • Built to exceed tool standards
  • Designed to help you remove and install press-fit type ball joints without taking the control arm off the vehicle
  • Kit services: most Domestic and import rear wheel drive vehicles
Rank No. #11
BIG RED T70401S Torin Portable Hydraulic Ram: Auto Body Frame Repair Kit with Blow Mold Carrying Storage Case, 4 Ton (8,000 lb) Capacity, Red
  • Complete kit includes a variety of auto body, frame repair and construction components for lifting, pushing, pulling, bending, straightening and spreading
  • Ideal for your workshop or garage and has a 4 ton (8,000 lb) load capacity; Includes 20-7/8", 17-3/4", 9-3/4", 6-1/4", and 4-1/2" extension tubes with a snap-lock design for quick, easy assembly
  • Features a serrated saddle, spread wedge, rubber head, flat base, ram toe, plunger toe, wedge head, V-base, male connector, and a hydraulic hose
  • Pump has an automatic overload system to help prevent damage to rams and equipment; Flex head features a permanently molded rubber pad, interlocked to prevent separation
  • Plastic blow molded carrying case makes storage and transportation hassle-free; Includes a limited 1 year manufacturer warranty
Rank No. #12
OTC 7248 C-Frame Press for U-Joints, Brake Anchor Pins, Wheel Studs, and Ball Joints
  • OTC's C-Frame Press removes and installs automotive universal joints with needle bearings including GM plastic pin CV U-joints
  • Can also service u-joints found on Dana 60 4WD front drive axles with the addition of an OTC No. 6935 adapter
  • Handy tool also removes heavy duty truck brake anchor pins, press in wheel studs, and ball joints on most cars and light trucks with press-fit type ball joints
  • Removes and installs ball joints without the need to remove the control arm from the vehicle, saving time and money
  • High-grade materials ensure quality performance over the lifetime of the tool
SaleRank No. #13
Orion Motor Tech 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)
  • ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
  • HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
  • PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
  • ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.
SaleRank No. #14
Orion Motor Tech 21PCS Master Ball Joint Press | Upper and Lower Ball Joint Removal Tool | Automotive Mechanic Tool Set
  • ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH 22PCS Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with multi-size adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with all the receiver tubes and removing/installing adapters needed to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most GM, Chevy, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles, will service perfect for vehicles having the Dana 28, 30, 35, 44, 60 axle
  • PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged solid carbon steel with anti-rust black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
  • CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty ABS plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 9x Adapters, 1x Center Rod, 1x C-Frame, 1x Install Adapter, 1x Install Cup, 1x Install Cup Adapter, 1x Receiving Cup, 3x Receiving Tube, 1x Removal Adapter, 1x Screw, 1x Sleeve.
  • ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
Rank No. #15
OEM TOOLS 25105 Extra Large Ball Joint Press, Removes Ball Joints, Extended C-Frame, Works with Many Toyota, Chevrolet, Dodge Ram, and Ford Pick-Up Trucks
  • BALL JOINT REMOVAL KIT: Our ball joint tool kit is ideal for removing press-fit ball joints from pick-up trucks; Ball joint separator tool makes it easy to press out larger ball joints
  • WORKS WITH VARIOUS MODELS: This ball joint puller tool services pick-up trucks, such as the Toyota Tacoma and Tundra, Chevrolet 2500-3500 and Tahoe, Dodge Ram 2500-3500, and Ford F350-F551
  • HEAVY DUTY BALL JOINT PRESS: Our master ball joint service kit has a C-frame that is constructed with heavy-duty forged steel for strength and durability, making this large ball joint tool ideal for removing seized joints
  • WORKS WITH LARGER ADAPTERS: The master ball joint press tool's extended C-frame is long enough to allow for the use of multiple larger ball joint press adapters that standard C-frame presses won't fit
  • COMPATIBLE SLEEVE ADAPTERS: This ball joint remover does not include sleeve adapters for pressing out ball joints; Ball joints tool should be used in conjunction with OEMTOOLS 27310, 25104, 27165, 27166, or 27089
SaleRank No. #16
Orion Motor Tech 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RB06)
  • (1) ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
  • (2) HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
  • (3) UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
  • (4) PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.
  • (5) ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. Because to do perform your best, you deserve the best, that’s our Orion Motor Tech Promise.
Rank No. #17
OTC 7249 Ball Joint, U-Joint, and Brake Anchor Pin Service Kit with Storage Case
  • OTC's Ball Joint, U-Joint, and Brake Anchor Pin Service Kit removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins
  • Clamp frame features heavy duty materials and construction to prevent distortion in severe use cases
  • Contains 3 receiver tubes - 2-3/4 inch ID x 3 inch OD, 2-1/4 inch ID x 2-1/2 inch OD, and 1-3/4 inch ID x 2 inch OD
  • Includes 1 each; installing cup, receiving cup, and installing adapter
  • Sturdy blow molded hard case keeps contents protected and secure when not in use
Rank No. #18
Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4wd Adapters, for Most 2WD and 4WD Cars and Light Trucks (BK)
  • EASY OPERATION: The ORION MOTOR TECH Ball Joint Press Set with 4x4 Adapters effortlessly removes press-fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm.
  • UNIVERSAL COMPATIBILITY: Fits most American domestic and imported cars and light pickup trucks with press-fit type ball joints. Includes a 4WD adapter for service on 1967 - current 1/2 and 3/4 ton 4WD vehicles with the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC, and Jeep vehicles).
  • PROFESSIONAL-GRADE DURABILITY: Constructed from heavy-duty forged steel with black-oxide finished adapters for maximum strength and longevity that resists rust and corrosion to endure years of heavy use.
  • ALL-IN-ONE TOOL SET: 3x Receiving Tubes, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
  • PROTECTIVE CARRYING CASE: Each component is contained in a heavy-duty plastic carrying case with a handle for safe storage and quick organization. If you are not satisfied with this product or if you have any questions, please feel free to let us know.
Rank No. #19
Astro Pneumatic Tool 7865 Ball Joint Service Tool with 4-wheel Drive Adapters
  • Heavy duty forged steel tool and set is excellent for removal/installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins
  • Will remove rusted and corroded parts
  • Set contains C-frame press, 3 receiver tubes sizes: 2-3/4”x3"", 2-1/4”x 2-1/2” & 1-3/4”x2”, installation and removing adapters
  • Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)
  • Blow molded case for easy storage and transport
Rank No. #20
KSP Adjustable Ball Joint Press Kits,U Joint Remover&Install Tool fit for Most domestic and imported 2WD 4WD Cars &Trucks&Pickup
  • Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints;for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 44 front axle.Can fit all of the control arm in our store.
  • The "C" clamp and the thread bolts made of high quality material,stronger and long life time. Not easy to bent
  • We have improve the installation of the thread bolts let the installation easier. The thread with a special air design which can protect the product reduce damage.
  • The package with a professional Plastic boxes. I think it is a good choice whether used by yourself and as a gift. Tips: This repair tool can fit all the control arms which sold in our store.
  • We promised 1 Year warranty, unconditional return within 1 month. If you are uncertain of any problems, please contact us instead of comments.

Last update on 2021-05-23 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Autozone Ball Joint Press Rental for our consumer to review. The reports above show ratings of the best overal, best cheap Autozone Ball Joint Press Rental to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.