The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 Aluminum T Track Extrusion of 2020 – Consumer Guide & Reviews

Rank No. #1
Orange Aluminum – Metal T-Track – Aluminum Extrusion – Slider Bar for 1/4”-20 Hex Head Bolts – Mount, Position and Hang Clamps & Fixtures – Clear Anodize Finish, 48 Inch Track
  • T-TRACK HARDWARE: The rail slot is ideal for positioning jigs, stops, clamps, and hold down fixtures on table saws.
  • EASY TO USE: Specialty metal T track allows you to slide in and reposition 1/4"-20 hex head bolts in seconds.
  • PRE-DRILLED: T-bar has punched holes 3” on center - slots accommodate #8 pan head screws.
  • CLEAR ANODIZE FINISH: The aluminum extrusion is corrosion resistant and protected from oxidizing.
  • ORANGE ALUMINUM: Our range of aluminum extrusions includes tracks, brackets, rails and other premium hardware for both home and professional use.
SaleRank No. #2
POWERTEC 71223 Multi T-Slot Track | Aluminum 3 x 36" T-Track
  • INCLUDES: (1) Multi T-Track (36 Inches Long)
  • UNIVERSAL: T-Track design accepts 1/4'' T-bolts | 1/4'' Hex bolts | 5/16'' T-bolts – the most commonly used accessory fasteners
  • APPLICATIONS: These combo tracks can be used with table saws, band saws, routers, drill press tables, and almost a limitless amount of t track woodworking options. With t-tracks on both sides, top and bottom, these tracks can be used as fences in a number of applications and work with Powertec 71367, 3" flip stops, to provide repeatability and accuracy to several woodworking applications.
  • PREMIUM BUILD: Made with a solid extruded aluminum construction, these lightweight multi-tracks were manufactured with a higher strength-to-weight ratio, corrosion resistant properties and superior long-term durability
  • UNIFORM DESIGN: T-tracks are spaced 3/4'' apart (on center), 3/4" thick and offer simplistic assembly for fast-tracked work efficiency
Rank No. #3
POWERTEC 71133 Double T-Track | 36 Inch Aluminum Extrusion Tracks
  • INCLUDES: (1) 36 Inch Dual T-Slot Track
  • FUNCTION: Gives you two t-tracks combined together to form one solid, professional quality component that instantly doubles the possibilities of your woodworking t-track, jig and fixture assemblies
  • FEATURES: Pre-Drilled holes for quick and easy installation; Miter slot requirement specs - 1-7/16" wide and 7/16" thick (screws not included)
  • PREMIUM BUILD: This universal t-track extrusion was constructed out of anodized aluminum, not only delivering anti-corrosive and rust proof properties, but strong and durable enough to handle the most complex projects
  • DOUBLE THE VERSATILITY: Both tracks can simultaneously be used for unique placement or for the attachment of additional t-track accessories (stops, fences, clamps, etc) clamping fixtures, or one of Powertec’s t-track scales – delivering optimal functionality that increases precision while reducing set-up time
Rank No. #4
Lot 2 Each, 48" Aluminum T Track 3/4" by 3/8" Slot, Accepts 1/4" Hex Bolts, 1/4" or 5/16" T Bolts, Countersunk Holes Every 6" 112132
  • Lot of 2 each 3/4” wide x 3/8” high x 48” long
  • Precision extruded aluminum
  • Thick .100” sidewalls minimize bowing and twisting
  • Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts
  • Counter sunk holes drilled 3" from each end and then every 6” for #6 screws. Screws not included.
Rank No. #5
T-Track 36" –Double Cut Profile Universal with Predrilled Mounting Holes -Woodworking and Clamps -High Strength Aluminum Alloy 6063 –Aluminum Extrusion -Fine Sandblast Black Anodized – 4 Pack(black)
  • 1-YEAR WARRANTY - We, as the seller & brand owner - Hot Favorable, provide exclusive extended warranty for our T-Track. If you have any problem with your purchase throughout one year, please let us know. We will solve it as soon as possible by all means.
  • STURDY COMMERCIAL QUALITY - Constructed of High Strength Aluminum Alloy 6063 for durability and wear resistance.
  • PRODUC SIZE - Each track size is 36" length x 3/4" width x 3/8" depth.
  • EASY TO INSTALL - Easy to install each track is equipped with pre-drilled mounting holes for simple installation. The qty of screws is need as below: 9 screws per T-Tack, 36 screws per set. Please noted that the screws aren’t included in set, you need offer the screws yourself. 7 x 5/8" Flat Head Phillips Deep Thread Wood Screws is recommended.
  • UNLIMITED USES - Our T-Track has unlimited uses in the shop when making jigs and fixtures used on woodworking and metal working machines. Configure T-Track components in most every direction; Greatly Increasing the versatility of your T-Track assembly, jigs and fixtures.
Rank No. #6
POWERTEC 71119 Double-Cut Profile Universal T-Track with Predrilled Mounting Holes(2-Pack), 36"
  • Premium quality: constructed out of extruded anodized 6463 aluminum, delivering a lightweight design that possesses an impressive strength to weight ratio, along with corrosion resistance and superior resilience
Rank No. #7
80/20 Inc, 1010, 10 Series, 1 Inch x 1 Inch Extrusion x 97 Inch Long
  • 10 Series Modular Extrusion with Four Open T-Slots
  • Compatible with all 10 Series Fasteners and Accessories
  • Four open available T-slots for mounting accessories
  • Great for furniture, displays, trade show booths, or any project requiring a finished look
  • Made out of 6105-T5 aluminum (or equivalent) with a clear anodized finish
Rank No. #8
10 Pack ZYLtech Silver 2020 T Slot Aluminum Extrusion for 3D Printer and CNC - 10X 1M
  • High strength aluminum extrusion
  • Standard 6mm T slot
  • Ideal for 3D printer and CNC build
Rank No. #9
80/20 Inc, 1030, 10 Series, 1" x 3" Extrusion x 48"
  • 10 Series Aluminum T-Slotted Extrusion with Eight Open T-Slots
  • Compatible with all 10 Series Fasteners and Accessories
  • Eight open available T-slots for mounting accessories
  • Center cavities can be pressurized up to 150 psi.
  • Made out of 6105-T5 aluminum (or equivalent) with a clear anodized finish
Rank No. #10
PZRT 2020 Series Aluminum Profile Connector Set, 20pcs Corner Bracket,40pcs M5 x 10mm T-Slot Nuts, 40pcs M5x10mm Hex Socket Cap Screw Bolt for 6mm Slot Aluminum Profile Accessories
  • 2020 Series Aluminum Profile Connector Set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects
  • Cast Aluminum Corner Bracket used to connect pieces of 20mm aluminum extrusion at a 90 degree angle suitable for most of metric 20 Series Aluminum Profile Extrusion
  • T-Slot Aluminum Extrusion M5x10mm Hardware Slide In T-Nuts made from high quality carbon steel Galvanized,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life.
  • High Quality Carbon steel Hex Socket Button Head Bolts Screws Nuts Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.used widely in the home and office appliance, communication equipments, ship assembly and other machinery industry
  • Package Content: 20pcs 20mm 90 Degree Solid Cast Aluminum Corner Bracket,40pcs Carbon Steel Galvanized M5 x 10mm T-slot Nuts, 40pcs Carbon steel M5x10mm Hex Socket Cap Screw Bolt
Rank No. #11
Lot 4 Each, 48" Aluminum T Track 3/4" by 3/8" Slot, Accepts 1/4" Hex Bolts, 1/4" or 5/16" T Bolts, Countersunk Holes Every 6" 112134
  • Lot of 4 each 3/4” wide x 3/8” high x 48” long
  • Precision extruded aluminum
  • Thick .100” sidewalls minimize bowing and twisting
  • Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts
  • Counter sunk holes drilled 3" from each end and then every 6” for #6 screws. Screws not included.
Rank No. #12
Boeray 10pcs Aluminum Alloy T Slot L Shape Joining Plate and 50pcs M5x8 Hex Screw and 50pcs T Nut for 2020 Series Aluminum Profile
  • Material:Plate---high quality aluminum alloy;Nut:high quality carbon steel;Screw:high quality 304 stainless steel.
  • Dimension: 60 x 60 x 4mm / 2.36” x 2.36” x 0.16”(see the second image).
  • Hole diameter: 5.05mm / 0.2”, used with M5(5mm) screw and M5(5mm) t nut.
  • Used for: 2020 Aluminum Profile slot 6mm.
  • Quantity: 10pcs T Slot L Shape Joining Plate and 50pcs M5x8 Hex Screw and 50pcs T nut.
Rank No. #13
PZRT 3030 Series Aluminum Profile Connector Set, 4pcs Corner Bracket,8pcs M6 T Screw Bolt,8pcs M6 Flange nut,for 8mm Slot Aluminum Profile Accessories
  • 3030 Series Aluminum Profile Connector Set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, Robotics Projects
  • Cast Aluminum Corner Bracket used to connect pieces of 30mm aluminum extrusion at a 90 degree angle suitable for most of metric 30 Series Aluminum Profile Extrusion
  • M6 Hexagon Slip Locking Flange Nuts made from high quality carbon steel,surface is plated with nickel for good rust resistance and better performance high hardness and a long service life
  • High Quality Carbon steel M6 x 16mm T Screw Bolt Screws Nuts Surface chrome finish Anti-corrosion,rustless,non-pollution and high-hardness.used widely in the home and office appliance, communication equipments, ship assembly and other machinery industry
  • Package Content: 4pcs 30mm 90 Degree Solid Cast Aluminum Corner Bracket,8pcs Carbon Steel M6 Flange Nut,8pcs Carbon steel M6x16mm T Screw Bolt
Rank No. #14
Iverntech 1PC 400mm V Type 2080 Aluminum Extrusion Profile for DIY 3D Printer and CNC Machine
  • 400mm V type 2080 European standard aluminum profile
  • Packing with 1pc
Rank No. #15
Stand Tools 20 Series, 20 mm x 20 mm T-Slot Aluminum Extrusion x 700 mm Pack of 4
  • 20 mm x 20 mm x 700 mm
  • Four open available T-slots for mounting accessories
  • Light weight and have strong strength
  • Quick and easy installation
  • Try to design your personal item
Rank No. #16
4 Pcs 2020 CNC 3D Printer Parts European Standard Anodized Linear Rail Aluminum Profile Extrusion for DIY 3D Printer (400mm)
  • ✅High strength aluminum extrusion
  • ✅Ideal for 3D printer and CNC build
  • ✅High-quality and service
Rank No. #17
POWERTEC 71351 Aluminum T-Track 48 Inch Heavy Duty | Specialized T Slot Track Mounting for 1/4”-20 Hex Bolt
  • INCLUDES: (1) Aluminum T-Track 48 Inches Long
  • FITTINGS: Accepts specialized t-slot track mounting for standard 1/4”-20 Hex-bolts
  • DIMENSIONS: 3/4” width by 1/2” depth x 48” length | 16, 3/16” holes drilled 1-1/2” from each end then every 3” for #8 wood screws (not included)
  • DESIGN: Features a smooth, straight profile with pre-drilled mounting holes along the base for easy installation and is constructed out of extruded anodized aluminum for optimal performance, durability and t-track efficiency. An extruded line, in the bottom of the track, provides for easy and precise alignment when mounting.
  • VERSATILE: Perfect addition to any workbench machine and great for positioning jigs, stops, and hold down clamps on table saws
Rank No. #18
Glarks 150Pcs European M3 M4 M5 M6 Hammer Head Drop in T Nut Slot Assortment Kit for 20/30/40 Series Aluminum Profile - Nickel Plated Carbon Steel
  • Product Type: High quality hammer head drop in T slot nuts assortment kit
  • Merterial: All of them are made of high hardness nickel plated carbon steel, with good rust resistance and better performance, durable for long time use
  • ackage: This kit include 20 30 40 series with different size M3 M4 M5 M6 total 150pcs stored in a transparent plastic box, convenient for your storage and use
  • Feature: They can be directly into the aluminum slot hole in any of the assembly post, back spring ball can be fixed its position which make installation very simple and reliable
  • Application: T-Nuts suitable for 20/30/40 series aluminum profile, widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters, robotics projects
Rank No. #19
Lot 4 Each, 36" Aluminum T Track 3/4" by 3/8" Slot, Accepts 1/4" Hex Bolts, 1/4" or 5/16" T Bolts, Countersunk Holes Every 6" 112124
  • Lot of 4 each 3/4” wide x 3/8” high x 36” long
  • Precision extruded aluminum
  • Thick .100” sidewalls minimize bowing and twisting
  • Uses standard 1/4" hex heads, 1/4" T bolts or 5/16" T bolts
  • Counter sunk holes drilled 3" from each end and then every 6” for #6 screws. Screws not included.
Rank No. #20
10 Pack ZYLtech Black 2020 T Slot Aluminum Extrusion for 3D Printer and CNC - 10X 1M
  • High strength aluminum extrusion
  • Standard 6mm T slot
  • Ideal for 3D printer and CNC build

Last update on 2021-01-18 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 Aluminum T Track Extrusion for our consumer to review. The reports above show ratings of the best overal, best cheap Aluminum T Track Extrusion to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.