The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 90 Weight Gear Oil Pump of 2020 – Consumer Guide & Reviews

Rank No. #1
Lumax LX-1341 Multi-Purpose Oil Pump Suitable for Precise Dispensing of Fluids in Tough-to-Reach Places in Tools, Equipment, Machinery and Vehicles. 1 Qt. (1 L) Capacity Bottle.
  • 1 qt. (1L) capacity bottle
  • Ounces per stroke 0. 14 oz. (4cc)
  • Max. Fluid temperature: 140 degree (60 Degree Celsius)
  • Suction tube length: 7-3/4" (20cm)
  • Overall length: 12-1/2" (32cm)
Rank No. #2
Ironton Lever Action Hand Pump - for 5 Gallon Buckets
  • Includes pump, pail cover, 6 feet of clear PVC hose and curved discharge nozzle
  • 1 3/8in. inlet for fast flow
Rank No. #3
Valvoline 80W-90 DuraBlend Synthetic Blend Gear Oil - 1qt (Case of 12) (VV280-12PK)
  • Superior anti-wear, anti-scuffing and corrosion protection
  • Provides superior performance at low temperatures
  • Helps improve fuel efficiency
  • Resists breakdown at high temperatures
  • Recommended for (conventional and limited slip) manual transmissions where an API GL-5 or MT-1 fluid is specified
Rank No. #4
Slippery Pete Fluid Pump for Gallon Bottles and Wide Mouth Quart Bottles - Transfer Gear Oil, Transmission and Differential Fluid, Antifreeze with This 30cc Hand Pump
  • 🚙Pumps 1 FULL OUNCE (30cc) per pump stroke. Pumps an entire quart in 32 strokes
  • 🚤24 inch FLEXIBLE CLEAR FILL TUBE allows you to direct fluid into tight and awkward places. 3 different length suction tubes for various bottle heights
  • 🚛 Will also fit AGL, Toyota ATM, Amsoil and Castrol Edge WIDE MOUTH QUART BOTTLES. Use one of the 4 sizes of thread adapters provided to FIT WIDE MOUTH QUART BOTTLES
  • 🚗 100% money back guarantee
Rank No. #5
Lucas Oil LUC10043 Oil SAE 80W-90 Heavy Duty Gear Oil - 1 Quart
  • Contains special anti-wear and lubricity agents
  • Helps to control heat
  • Excellent for high performance and heavy-duty applications
  • Fit Type: Universal
SaleRank No. #6
PJ1 11-90 Gear oil, 32 Fluid_Ounces, 1 quart
  • PJ1 Drive Shaft Hypoid Gear Oil SAE 90W is designed for use in motorcycle drive shaft application
  • Formulated with high base stocks and very shear stable VI improvers
  • Non-corrosive like automotive gear oils. Anti-foaming and anti-scoring agents extend gear life and increase service intervals
  • PJ1 Hypoid Gear Oil will maintain viscometric properties throughout its useful life and will not experience rapid viscosity loss through shear
Rank No. #7
Slippery Pete - Lower Unit Gear Oil Pump for Standard Quart Bottles, Includes 3/8 inch Metal Swivel, 8mm and 10mm Adapters to Fit Most Marine Boat Outboard Motors (NOT COMPATIBLE WITH VOLVO PENTA)
  • 🚤 PUMPS 8CC PER PUMP STROKE (Includes Metal 3/8" Adapter Connected To Clear Plastic Tubing)
  • 🚤 THIS GEAR OIL CHANGE KIT includes 3 adapter sizes. 3/8"(Swivel, Metal), 8mm and 10mm (Metal). Take the guess work out of figuring out the size of your motor's gear oil drain plug. (WON'T FIT VOLVO PENTA)
  • 🚤Easy To Follow Instructions On Back Of Header Card
SaleRank No. #8
Quicksilver 858064Q01 High Performance SAE 90 Gear Lube for Mercury Outboards and MerCruiser Sterndrives, 32 oz
  • Formulated to protect against corrosion and excessive wear
  • Designed for outboard and sterndrive applications above 75 HP
  • Extreme pressure synthetic additives protect gears from metal to metal contact
  • 32 ounce bottle
  • SAE 90 viscosity
Rank No. #9
8M0072133 Gear Lube Pump - Fits One Quart or One Liter Bottles
  • Outboard or Stern Drive Gear Lube Pump
  • Fits all quart and liter bottles
  • Fits any outboard or stern drive with a 3/8"‑16 drain plug
  • Use adapter (included) for gear cases with an M8x1.25 drain plug
SaleRank No. #10
Valvoline High Performance SAE 80W-90 Gear Oil 1 QT
  • Protects against severe temperatures to help extend service life
  • Formulated with extreme-pressure additives to minimize gear wear from shock loads
  • Helps protect against gear wear from scuffing, scouring, corrosion and pitting in high speed, high load, high torque, and high horsepower conditions
  • Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified
SaleRank No. #11
Mercury 92-858064K01 Marine SAE 90 High Performance Gear Lube, 1 Quart
  • Water intrusion - advanced emulsifiers prevent foaming to protect gears if water enters gear housing
  • Wear - tackifiers and extreme pressure additives improve oil film adhesion and protect against Excessive wear
  • For use in all outboard lower units, jet pumps, and Sport JETS and all Mercury mercruiser sterndrives
  • Meets API gl-4
Rank No. #12
  • Mercury Quicksilver High Performance Gear Lube 32oz
  • Gear Lube Pump
  • See Description for Fitting
  • Fits 3/8-16 Drain Screws
SaleRank No. #13
Heavy and Extra-heavy Oil Upgrading Technologies
  • Used Book in Good Condition
  • Speight, James G. (Author)
  • English (Publication Language)
  • 176 Pages - 05/03/2013 (Publication Date) - Gulf Professional Publishing (Publisher)
SaleRank No. #14
Lucas Oil LUC10046 SAE 80W-90 Heavy Duty Gear Oil - 1 Gallon , White
  • Affordable Solutions
  • Provides rust protection
  • Ideal for shock loading applications
  • Can be used in limited slip differentials
Rank No. #15
Mercury Marine New OEM High Performance Gear Lube with Hand Pump, 91-8M0101435
  • SKU: 91-8M0101435
  • Sold Each
  • Please verify your own fitment
Rank No. #16
Mercury SAE 90 High Performance Gear Lube
  • Genuine OEM Factory Original Equipment Mercruiser Sterndrive & Outdrive Oil
  • Exclusive formula is engineered to provide extended gear life in extreme conditions including high-speed and high-horsepower applications
  • Extreme pressure synthetic additives protect gears from metal to metal contact
  • Engineered to provide maximum protection for sterndrive and outboard lower units
  • For use in most gear housings of Mercruiser sterndrives and all Mercury, Mariner, and Force Outboards
Rank No. #17
Star brite Premium Lower Unit Gear Lube, 32 Oz Quart
  • Formulated with special anti-wear additives, rust and corrosion inhibitors.
  • These products exceed all engine manufacturers-Feet specifications and are designed specifically for the marine environment.
  • Recommended for use in Mercury, Mercruiser, Johnson, Evinrude, OMC, Force, Mariner, Nissan, Suzuki, Yamaha and Volvo Will not void manufacturers-Feet warranties For lower units of all outboard motors and stern drives.
  • The ultimate lubrication for maximum performance and economy.
Rank No. #18
Valvoline 280 DuraBlend Synthetic 80w-90 Gear Oil - 1 Quart (1)
  • Valvoline 280 DuraBlend Synthetic 80w-90 Gear Oil - 1 Quart
  • Purchase Price is 1 Quart
SaleRank No. #19
Liqui Moly Marine High Performance Gear Oil 85W-90, 1L (20536)
  • Outstanding corrosion protection
  • High pressure-absorption capability
  • Prevents oil sludge and deposits even under higher operating temperatures
  • Included components: Bottle
Rank No. #20
Lucas 10045 Heavy Duty 85/140 Gear Oil - 1 Gallon
  • Fit type: Vehicle Specific
  • Package Dimensions: 31.0 H x 15.0 L x 15.0 W (centimeters)
  • Country of Origin : China
  • Package Weight: 7.892 pounds

Last update on 2021-07-05 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 90 Weight Gear Oil Pump for our consumer to review. The reports above show ratings of the best overal, best cheap 90 Weight Gear Oil Pump to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.