The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 55 Hole Saw of 2020 – Consumer Guide & Reviews

Rank No. #1
MK Morse MHS345 Bi-Metal Hole Saw, 55mm
  • Patent Pending tooth set design optimized to remove material faster
  • New cap reduces runout and vibration
  • New side slot increased leverage for faster, easier slug removal
  • New exterior red coating reduces side wall friction for efficient cutting
  • Heavy duty .050 side wall for greater stability
Rank No. #2
Hordion 2.16inch/55mm Carbide Hole Saw Cutter Drill Bit Tooth Tipped TCT Hole Cutter for Stainless Steel Sheet Metal Sheet Plastic FRP Board
  • Industrial Grade Structure: This 55mm hole saw uses high-quality TCT cemented carbide. Carbide tipped hole cutters are an excellent alternative to traditional bimetal hole saws. The excellent durability of TCT hole saws is unmatched by bimetal and HSS hole saw
  • Fast & Accurate Cutting: Carbide technology and optimized tooth profile make cutting faster, more precise, smoother and longer service life, reducing the chance of tooth chipping. At the same time, the cutter body cuts clean and burr-free holes faster than traditional twist drills or hole saws
  • Size: Cutting Diameter: 2.16" / 55mm, Cutting Depth: 1" / 25mm, Total Length: 3.1" / 78mm, Drill Bit Diameter: 0.24" / 6mm, L-Wrench Diameter: 0.12" / 3mm
  • Applicable Materials: Can be used for stainless steel, aluminum alloy, castings, section steel, iron, copper and other hard alloys. Suitable for installation in drill presses, bench drills or other drills
  • 100% Guarantee: If you are not satisfied with the product, you can get a full refund within 90 days, just contact us. We guarantee you a 100% satisfied shopping experience at Hordion Amazon Store.
Rank No. #3
REDDSN Hole Saw Kit ,SDS Plus Shank for Drilling Concrete Cutter Cement Stone Wall Drill Bit Include 35mm/45mm/55mm Hole Saw 200mm SDS Plus Shank and Center drill
  • 1,High-frequency welding technology, welding openings is very strong, smooth inside and outside welding mouth.
  • 2,Made of carbide tipped metal material of ultra-sturdiness and durability for years of use under the toughest conditions with uncompromised performance.
  • 3,3 different sized wall hole saws (55mm/2.17 Inch, 45mm/1.77 Inch, 35mm/1.37 Inch) are prepared for different cutting diameters, an all-in-one choice for daily use. the length of the connecting rod shank is 200mm/8 Inch, which can meet the drilling requirements of most wall thicknesses.With a center drill, Hex key, Hexagon bolt, Hexagon socket screw.
  • 4,Can be used for opening brick walls when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc.
  • 5,SDS plus shank, male thread Adapter,Greatly replace the broken adapter with your drill chuck.
Rank No. #4
Rannb Carbide Hole Saw Multiple-Tooth Drill Bits Cutting Tool for Stainless Steel Alloy with Hex Wrench - 55mm/2.16" Cutting Diameter
  • ⭐【Material】Our hole saw adopts premium Tungsten Carbide Tipped(TCT) with high hardness and good wear resistance.
  • ⭐【Dimension】Cutting Diameter: 55mm/2.16";Shank Diameter:10mm/0.4"; Max Cutting Depth: 25mm /1"
  • ⭐【Ideal Design】Pilot Drill Bit is used to locate the position precisely and protect carbide teeth from impacting when the pilot drill bit through the cutting material.
  • ⭐【Package Content】1 x Hole Saw + 1 x L Wrench + 2 x Pilot Drill Bit
  • ⭐【Applicable Material】 Quick, precise, smooth cuts into up to 5mm~25mm thick material like stainless steel, high alloy steel, aluminum, plastic, FRP and PVC.
SaleRank No. #5
General Tools 55 Heavy Duty Circle Cutter. Adjustable 1-3/4 Inch to 7-7/8 Inch
  • Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter
  • The tempered steel body features marked graduations on the beam for fast measurement and application
  • #55 Heavy Duty Circle cutter is designed with a 1/2 shank for drill press use only; Maximum safe speed is 500 RPM
  • This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more; Shank is 1/2 inch round
  • All adjusments are made with a hex wrench which is included; Replacement blade is General Tools Model # 55 Blade, replacement drill is General Tools Model # 5/6/55 Drill
Rank No. #6
uxcell 55mm Carbide Hole Cutter, TCT Hole Saws for 5mm Stainless Steel Sheet Metal
  • Specifications: Cutting dia.: 55mm / 2.17"; shank size: 10mm / 0.39"; cutting depth: 25mm / 0.98"; overall length: 100mm / 3.94"; non-slip triangular shank. Carbide hole cutter is with longer life than normal metal cutting hole cutters
  • General Purpose: Can provide fast and precise cuts into stainless steel sheet, cast iron plate and other metals below 5mm. Suitable for round or square pipes, equipment cabinet
  • All In One: Drill bit, spring, wrench are included, no need to buy any extra accessories for the drilling works
  • Application: Can be used on hand held drill, bench drills, magnetic drills, pneumatic drills and other rotating machines
  • Warm Tips: Keep the drill running evenly at a low speed or pre-drill the center hole for extending hole cutter life. Please add coolant or water when working on stainless steel and steel metal sheets above 5mm
Rank No. #7
uxcell 55mm Diamond Drill Bits Hole Saws for Glass Ceramic Porcelain Tiles
  • Diamond coating maximizes performance and retains a sharper cutting edge.
  • Nickel plating surface can extend the service life and enhance the corrosion resistance.
  • Ideal tool for cutting accurate holes in a variety of materials such as glass and ceramics.
  • Please remember to use at a low speed and work with coolant when processing.
  • Package Content: 1pcs x Glass Hole Saw. Provide different sizes to satisfy your demands.
Rank No. #8
uxcell Diamond Drill Bit 55mm Glass Hole Saw Core Drill Bit with Center Pilot Bit for Glass Ceramics Porcelain Tile
  • Specification: Size: 55mm / 2.17". Suitable for Stone, Tiles, Ceramics, Glass and Granite, etc Processing. The pilot bit in the center helps for cutting accurate holes
  • Long life: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life
  • Clearance Hole: Diamond drill bits along with clearance hole facilitate the entrance of cooling water and escape of chips from drilling. Makes drilling process easier
  • Sharp & Smooth Cut: Diamond hole saw creates high precision, smooth cuts with no broken edges. White Zinc plating on the bits maximizes tool’s life with great resistance to corrosion
  • Please Note: Water is required for lubrication and cooling when drilling. Not for use on concrete or for depths beyond about 1/2 inch
Rank No. #9
55mm Diamond Hole Saws Drill Bit Masonry Drilling Tools for Stone Glass Tile
  • Product Name: Diamond tip masonry bit, Stone cutting bits, Large hole saw, Granite hole bit
  • Outside Diameter:55mm; Hex Shank Diameter:10 mm (3/8"); Total length:65mm; Drill depth:29-30mm
  • Excellent for making clean and accurate hole on stone, granite, marble, tile
  • Diamond drill set with 3/8" hex shank that will fit cordless screwdrivers, drills or drill chuck
  • Start drill at 45 degree to surface and align to 90 degree as hole forms
Rank No. #10
55mm TCT Hole Saw, 2-3/16” Cutting Diameter Tungsten Carbide Tipped Hole Cutter Opener, for Stainless Steel Metal Plate Aluminum
  • Tungsten carbide-tipped cutting edges last longer and can be run at higher rates and speeds, cutting diameter is 55mm(2-3/16"), effective depth is 25mm(1”).
  • Well made of high speed steel, with extremely sharp blade, low consumption and durable, provided impact resistance, wear resistance.
  • Edge coated with diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut without broken.
  • Integrated design including drill bit, spring, hex wrench. Split point pilot drill bit prevents the bit from walking.
  • Fast and precise cutting for stainless steel, sheet metal, fiberglass and wood.
Rank No. #11
Bi-Metal Hole Saw Drill Bit HSS Hole Cutter with Arbor for Wood and Metal 2-5/32’’(55mm)
  • ✔ Needs just 1 pass to cut through studs; These hole saws are ideal for work where high performance and accuracy are needed. Excellent for cutting wood, plastic, machinable metal, nail embedded wood, plywood, pipes, and steel.
  • ✔ High-speed steel cutting edge provides shock resistant teeth and resists tooth strippage. Soft, spring steel creates a flexible backing material that allows the hole saw to absorb impacts of the job of drilling holes in difficult-to-cut materials.
  • ✔ Versatile cutter that can be used in a wide variety of applications; Ideal for plumbing, construction, aircraft, electrical, maintenance and automotive applications.
  • ✔ Cuts faster, smoother without as much vibration as the others due to its variable pitch teeth; Creates holes for pipe and tubing installations, door lock installations, electrical conduit, hoses and antennas.
  • ✔ The teeth are electron-welded to shatterproof, shock-absorbing alloy bodies;Packaged in individual boxes. Note: Arbor is included.
Rank No. #12
HOHXEN 55mm SDS Plus Shank Hole Saw Cutter Concrete Cement Stone Wall Drill Bit
  • ☀SIZE:Diameters are available in a variety of sizes:30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm.suited for any rotary hammer drill which accepts SDS-max shank.
  • ☀HIGH QUALITY:Use YG8 carbide manufacturing, the matrix 40CR, high-frequency welding technology inlay alloy,very durable. Simple operation, easy to use,and fast perforated.
  • ☀BLADE DESIGN :Rounds alloy blade combinations, each blade to bear part of the workload, not prone to chipping off the edge.
  • ☀HIGH-FREQUENCY WELDING TECHNOLGY :welding openings is very strong, smooth inside and outside welding mouth, precision engage, appearance.
  • ☀WIDE USAGE : Great for drilling concrete wall, stone, brick, cement, masonry, aerated block, slump block, air-conditioning installation.
Rank No. #13
BINOTA Concrete Hole Saw SDS Plus Shank for Cement Brick Wall, Kit 40 55 80 100 110 130 mm
  • PACKAGING: packed in aluminum plastic box, durable and easy to carry.
  • COMPONENTS: 13PCS, including hole opener 40, 55, 80, 100, 110, 130mm. Connecting rod*2, positioning drill*3, wrench*1.
  • MATERIAL: the cutter head is made of alloy YG8, which can be used for drilling cement wall, concrete wall, brick and so on.
  • THE USE OF OCCASIONS: can be used for opening brick walls when installing air conditioners, water pipes, water heaters, fume pipes, sewers, etc.
  • DESIGN : the shank of the connecting rod adopts SDS PLUS 300mm length design, which is convenient to use with four-hole electric impact drill. And SDS MAX 300mm length, which is convenient to use with round shank five-hole electric impact drill.
Rank No. #14
HSS Hole Saw Kits, High Speed Steel Drill Bits Hole Saw Opener Cutting Tool for Metal, Copper, Stainless Steel, Iron Plate (thick less than 1/9"(3mm)) Big Size 9/15”(15mm) ~ 2-4/25”(55mm) Set of 8
  • Material: These metal hole saw arbors made of high speed steel, and carbide steel saw teeth, highly hardness, strong toughness, low abrasion, wear resistance, long using life
  • Available application: These hole saw kits can be used for stainless steel sheet, iron plate, thin aluminum, copper, pipes, wood, plastic etc(less than 3mm). And it can compatible with pistol drill, bench drill, vertical electric drilling machine etc
  • Set of 8 different size: 9/15”(15mm), 25/32”(20mm), 1-1/10”(28mm), 1-8/45”(30mm), 1-11/30”(35mm), 1-13/20”(42mm), 1-22/25”(48mm), 2-4/25”(55mm). Multi different size HSS hole saw set for your choose, it will meet most of your needs.
  • Attention: When you use the hole saw drill bit, you should fixed the plate first, and make the angle of drill and plate at 90 degree. Also, the rotating speed should be increased slowly, the bigger of saw, the slower of the speed, and add the fresh water to cool the saw when it working.
  • Warranty: We promise to provide satisfied service for all of client, if there is any quality issue, we can give you a new replacement or full refund.
Rank No. #15
Sydien 1 Pack Professional 55mm/2.17" Sharp HSS Hole Saw Cutting Drill Bit With Wrench For Stainless Steel, Iron, Metal & Wood Drilling
  • ⭐Package Content: 1 Pcs x Hole Saw & 1 Pcs x Wrench; Type: 55mm.
  • ⭐Dimension: Outer Diameter of Hole Saw: 55mm/ 2.17"; Total Length: 70mm/ 2.76"; Diameter of Shank: 9mm/ 0.35".
  • ⭐High Quality: The hole saw is made of HSS with strong toughness, long service life, stable quality and fast cutting speed.
  • ⭐Sharp & Durable: It is manufactured through multiple heat treatment processes, which greatly improves the sharpness and durability of the cutting edge.
  • ⭐Application: Suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine. Perfect for fast drilling holes and cutting in stainless steel, iron, aluminum, copper, metal, etc.
Rank No. #16
JINGLING 53mm 2-1/8" inch Diamond Coated Tool Drill Bit Hole Saw for Glass Tile Ceramic Marble Color Silver
  • Product Name: 53mm Diamond tip drill bit, 53 mm Glass hole saw bit, Glass drill bit
  • Suitable for use in drill hole on glass, tile, ceramic, stone, marble or granite
  • Hole Diameter: 53mm; Shank Diameter: 10mm (3/8"); Total Length: 55mm
  • Start drill at 45 degree to surface and align to 90 Degree as hole forms
  • The hole does not need further work because the cut is clean
Rank No. #17
HSS BI-Metal, DEEP Cut Hole Saw with Arbor, 1-1/16" - 27MM Diameter
  • Aggressive material penetration and swarf clearance, removing the need to carry a constant and variable pitch Hole Saw
  • Constructed of hardened steel and abrasion resisting high speed steel teeth with a tough alloy body and cap
  • The complete Multi-Purpose Saw
  • Cutting depth of 51 mm (2”)
  • Starrett designed Tooth geometry resulting in huge improvements in chip flow
Rank No. #18
uxcell Wall Hole Drill Bit 55mm Concrete Cement Stone Hole Saw Cutter 240mm Drilling Depth Round Shank with Connecting Rod Drill for SDS X4 Impact Drill
  • QUALITY MATERIAL: Made of carbide tipped material of ultra-sturdiness, durability for years
  • SIMPLE TO USE: Simple operation, easy to use, fast perforated, approximately 240mm (9.45-inch) drilling depth
  • WIDE USE: Used for drilling walls, stones, bricks, or installation of air-conditioning etc.
  • SPECIAL SHANK DESIGN: Special direct system shank, male thread adapter, replace the broken adapter with your drill chuck.
  • WELDING TECHNOLOGY: High-frequency welding technology, welding openings is strong, smooth inside and outside welding mouth
SaleRank No. #19
LENOX Tools Hole Saw with Arbor, Speed Slot, 1-1/4-Inch (1772491)
  • 2X more durable with 50% longer life than previous LENOX hole saws
  • Increased wall thickness improves durability and minimizes tooth loss
  • Optimized tooth design penetrates metal with ease
  • Larger, sharper teeth for faster cutting
  • SPEED SLOT staircase design for easy plug ejection
SaleRank No. #20
SEPTLS585373003 - Irwin Hole Saw Mandrels - 373003
  • The package length is 18.288 centimeters
  • The package height is 2.54 centimeters
  • The package width is 7.366 centimeters
  • Package Weight : 0.4 pounds

Last update on 2020-11-15 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 55 Hole Saw for our consumer to review. The reports above show ratings of the best overal, best cheap 55 Hole Saw to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.