The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 5000 Watt Amp Planet Audio of 2020 – Consumer Guide & Reviews

Rank No. #1
Planet Audio TR5000.1D Class D Car Amplifier - 5000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
  • POWER: 5000 Watts Max x 1 @1-Ohm, 2500 Watts Max x 1 @2-Ohms
  • CLASS D: Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • STRAPPING CAPABLE: You are able to strap TWO TR5000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
SaleRank No. #2
Planet Audio Channel Car Amplifier - 1800 Watts
  • Power - 5000 Watts Max x 1 @1-Ohm, 2500 Watts Max x 1 @2-Ohms, 1250 Watts Max x 1 @4-Ohms, 10,000 Watts Max x 1 @2-Ohms Max Bridged
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable - You are able to strap two AC5000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • Variable Subsonic filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
SaleRank No. #3
Planet Audio PL4000.1D Class D Car Amplifier - 4000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
  • Power - 4000 Watts Max x 1 @1-Ohm, 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms, 8000 Watts Max x 1 @2-Ohms strapped
  • MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable - You are able to strap two PL4000.1D amplifiers and double the power that is being sent to your subwoofers. You now have the ability to connect more subwoofers to take advantage of the extra power
SaleRank No. #4
Planet Audio PL3000.1D Class D Car Amplifier - 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers
  • Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
Rank No. #5
Planet Audio BBD4000 Class D Car Amplifier – 4000 Watts, 1 Ohm Stable, Digital, Monoblock, MOSFET Power Supply
  • Power: 4000 watts max X 1 @1-ohm, 2000 watts max X 1 @2-ohms, 1000 watts max X 1 @4-Ohms
  • Class D: power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 ohm stable: able to continuously power loads of 1 ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Variable subsonic filter: to prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
  • Variable low-pass crossover: subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
Rank No. #6
Planet Audio AC2500.1M Monoblock Car Amplifier - 2500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control
  • POWER: Maximum Power Output of 2500 Watts at 2 Ohms into one channel. Maximum Power output of 1250 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. This input will be used to connect the AC2500.1M to your factory radio or aftermarket radio that does not have low-level (RCA) inputs.
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AC2500.1M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. A low-pass filter will primarily keep high notes out of your subwoofer(s)
  • VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
Rank No. #7
Planet Audio AC4000.1D Class D Car Amplifier - 4000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet Power Supply
  • Power - 4000 Watts Max x 1 @1-Ohm, 2000 Watts Max x 1 @2-Ohms, 1000 Watts Max x 1 @4-Ohms, 8000 Watts Max x 1 @2-Ohms Bridged
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable - You are able to strap two AC4000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
SaleRank No. #8
Planet Audio PL2400.4 4 Channel Car Amplifier - 2400 Watts, Full Range, Class A/B, 2/8 Ohm Stable, Mosfet Power Supply, Bridgeable
  • 600 W MAX Power @ 2 Ohm x 4 Channels
  • 300 W MAX Power @ 4 Ohm x 4 Channels
  • 1200 W MAX Bridged Power @ 4 Ohm x 2 Channels
  • Full-Range, Class A / B Topology, MOSFET Power Supply
  • Low and High Level Inputs, Variable Filter, Variable Bass Boost
Rank No. #9
Planet Audio PC10F 10 Farad Car Capacitor For Energy Storage To Enhance Bass Demand From Audio System
  • 3 Digit Bright Blue Digital LED Voltage Display, Blue Illuminated Window
  • Audible Warning Tone for Reverse Polarity, Voltage Overload and Low Battery Voltage
  • Voltage Measurement Accurate to + / - 0.1 VDC
  • Capacitance: 10,000,000, Working Voltage: 16 VDC, Surge Voltage: 24 VDC
  • Equivalent Series Resistance: 0.015 Ohm @ 100 Hz / 25°C, Capacitance Tolerance: + / - 10%
Rank No. #10
Planet Audio Channel Car Amplifier - 1800 Watts
  • Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms, 6000 Watts Max x 1 @2-Ohms Max Bridged
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable - You are able to strap two AC3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • Variable Subsonic filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion
Rank No. #11
Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control
  • power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s)
  • variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it
Rank No. #12
Planet Audio PL1500.1M Monoblock Car Amplifier - 1500 Watts, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply
  • Power - 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
Rank No. #13
BOSS Audio OX3KD Class D Car Amplifier – 3000 Watts, 1 Ohm Stable, Digital, Monoblock, MOSFET Power Supply
  • POWER: 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms. DIMENSIONS: The OX3KD is 12.3 inches in Depth, 7 inches in Width and 2.3 inches in Height. It weighs 6.5 lbs.
  • CLASS D: Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 OHM STABLE: Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • STRAPPING CAPABLE: You are able to strap TWO OX3KD amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • WARRANTY: BOSS Audio Systems provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality
SaleRank No. #14
Planet Audio AC2600.2 2 Channel Car Amplifier - 2600 Watts, Full Range, Class A/B, 2-4 Ohm Stable, Mosfet Power Supply, Bridgeable
  • 1300 W MAX Power @ 2 Ohm x 2 Channels
  • 650 W MAX Power @ 4 Ohm x 2 Channels
  • 2600 W MAX Bridged Power @ 4 Ohm x 1 Channels
  • Full-Range, Class A / B Topology, MOSFET Power Supply
  • Low and High Level Inputs, Variable Filter, Variable Bass Boost
Rank No. #15
Audiopipe APMN-2000 RMS Class D Monoblock Subwoofer Amplifier, 2000W Mono Sub Amp
  • PLEASE NOTE: Its Recommended Grounding To The Frame of The Vehicle.
  • RMS Power Rating (4 ohms): 770 watts x 1 channel. - RMS Power Rating (2 ohms): 1300 watts x 1 channel.
  • RMS Power Rating (1 ohm): 1944 watts x 1 channel.
  • Frequency Response: 30-180Hz. LPF: 40-180Hz Subsonic Filter: 5-50Hz
  • Fuses: 1 X 150A AFC fuse and fuse holder (included) Remote bass knob, 1 Ohm Stable.
Rank No. #16
SoundBox SCAP5D, 5 Farad Digital Capacitor for Car Audio - 5000 Watts
  • SoundBox Connected 5 Farad Digital Capacitor
  • 5000 Watts Stabilizing Amplifier Flow Capacity
  • High Strength Cylindrical Aluminum Housing
  • Capacitance: 5 Farad
  • Automatic On/Off Power Sensor
SaleRank No. #17
Planet Audio AC1500MK Car Amplifier and 8 Gauge Wiring Kit - 1500 Watts Max Power, 2/4 Ohm Stable, Class AB, Monoblock, Mosfet Power Supply, Remote Subwoofer Control
  • Max Power 2 Ohm: 1500 Watts x 1 - RMS Power 2 Ohm: 1100 Watts x 1. Monoblock Class A/B. MOSFET Power Supply
  • 8 Gauge Amplifier Installation Kit Included
  • Variable Low Pass Crossover, Variable Bass Boost, High and Low Level Inputs
  • Dimensions: 10" L x 10-21/32" W x 2-13/32" H
  • Blue Illuminated Planet Audio Logo, Remote Subwoofer Control
Rank No. #18
Ignite Audio R3000/1D, Class D Mono Block Car Amplifier - 6000 Watts Peak Power
  • 6000 Watt Monoblock Class D Car Amplifier
  • RMS Power Rating: 1020W x 1 @ 1 Ohm / 720W x 1 @ 2 Ohms / 420W x 1 at 4 Ohms
  • Frequency Response (+/- 1db): 10Hz - 300Hz
  • Signal To Noise Ratio: >85dB / Sensitivity: 0.2-6V / THD: < 1%
  • Physical Dimensions: 14.84" x 8.94" x 2.05"
Rank No. #19
Planet Audio Channel Car Amplifier - 1800 Watts
  • Power - 1000 Watts Max x 2 @2-Ohms, 500 Watts Max x 2 @4-Ohms, 2000 Watts Max x 1 Bridged @4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Variable High-Pass Crossover - Speakers reproduce sound based on high, low or mid-range frequencies. What the Variable High-Pass Crossover does is that it gears specifically towards “highs” such as all size speakers including mid ranges and tweeters
Rank No. #20
Power Acoustik OD1-5000D Overdrive Series 5000 Watts Max 1 Ohm Mosfet Power Supply Class D Car Audio Monoblock Amplifier, Black
  • 1 OHM STEREO: 1-ohm stable monoblock operation for MAX power
  • DOUBLE POWER Bridge 2 monoblocks together for double power
  • MOSFET POWER SUPPLY: Military-grade PCB with PWM MOSFET power supply
  • OVERLOAD CIRCUIT PROTECTION: Direct short, thermal, and overload circuit protection
  • SPECIFICATIONS: High/speaker level and low level/RCA input; 4g power wire and 8g speaker wire outputs; Variable 12dB high and low pass crossovers; 12dB bass boost increases low octave harmonics; Dimensions (L x W x H): 16.25 x 8.75 x 4 inches; Weight: 8.22 pounds

Last update on 2021-07-14 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 5000 Watt Amp Planet Audio for our consumer to review. The reports above show ratings of the best overal, best cheap 5000 Watt Amp Planet Audio to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.