The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 5 8 Miter Gauge Bar of 2020 – Consumer Guide & Reviews

SaleRank No. #1
POWERTEC 71518 18-Inch Miter Gauge Jig and Fixture Bar for Woodworking
  • INCLUDES: (1) Jig and Fixture Bar with a set of 10-32 nylon adjustment screws (mounting hardware)
  • APPLICATION: A necessary addition to your collection of workshop tools for creating woodworking jigs and fixtures for your router table, band saw or table saw
  • FUNCTIONAL DESIGN: Features 6 countersunk mounting holes along the top of the bar (plus an additional non-countersunk hole), with 6 tapped holes (10/32”) on the side – All holes are clean and burr free
  • VERSATILITY: The top mounting holes are 5” on center, while the side mounting holes are 3-3/4” on center – providing you with a host of mounting options
  • QUALITY BUILD: This miter gauge bar is manufactured with high precision aluminum – delivering a polished profile, excellent fit and long-term durability
SaleRank No. #2
miter gauge,table saw miter gauge aluminum alloy precision miter gauge for table saw 5/8 slot with miter gauge fence miter gauge miter gauge jig and fixture bar miter gauge table saw accessories
  • ❤ The table saw miter gauage all-aluminum guide rod and all-aluminum baffle can be modified and expanded.
  • ❤ 【Miter gauge cuts accurately】Loosen the knob to quickly adjust the angle, which can be used for precise angle cutting.
  • ❤ 【The table saw miter gauge is easy to operate and safe to use】. The miter gauge can adjust the angle adjustment knob according to the angle of the object to be cut,
  • ❤ 【Table saw miter gauge can cut objects of different shapes and sizes】.
  • ❤The table saw miter gauge is widely used in woodworking DIY, perfect for wood cutting projects: it can be used for table saws, band saws, router planers, lockstitch machines. If there are product quality problems, and any problems, we can replace them at any time(Please see the size of the picture)And its slide
SaleRank No. #3
MICRO JIG ZEROPLAY Miter Bar
  • build table saw sleds fast
  • no slop, side-to-side play or seasonal warping
  • top-down installation for easy and fast mounting to jigs, fixtures and sleds
  • zeroplay miter bars will fit any standard (3/4”) t or u-shaped miter slot that measures between 0. 73 and 0. 79" wide and at least 5/16" deep."
  • includes (1) miter bar. miter stop not included. made in the usa.
Rank No. #4
FTVOGUE Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Wood Woodworking Tool (01)
  • ➤ Made of high quality aluminium alloy, miter bar is of strong strength and reliable durability for several year using without abusing.
  • ➤ This is a miter bar usually used in table saw woodworking works .Universal threaded mounting holes for convenient use.
  • ➤ Adjustable stainless steel runner for perfect sliding action. For building various jigs on your table saw, like miter sleds etc.
  • ➤ Easy assembling, makes it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues.
  • ➤ These bars slide easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts.
Rank No. #5
Ryobi BS904 Band Saw Replacement Miter Gauge Assembly # 089120406701
  • Includes (1) 089120406701 Miter Gauge
  • New, Bulk Packed
  • Genuine Ryobi Replacement Part
  • Consult owners manual for proper part number identification and proper installation
  • Please refer to list for compatibility
Rank No. #6
LEXIVON Aluminum Miter Saw Protractor | 7-Inch Rust Proof Angle Finder Featuring Precision Laser Engraved Scales (LX-230)
  • ACCURATE - Crafted from CNC-machined Anodized Aluminum Alloy Steel. Features easy-to-read precision laser engraved scales.
  • DESIGN - Internal Teflon O-ring mechanism swivels during operation and ensures smooth & precise read on inside/outside corners.
  • FORGET ABOUT THE GUESSWORK - Two scales transfer your work angle directly to the miter saw for an accurate Miter cut, and Single cut.
  • DO IT RIGHT THE FIRST TIME! - Perfect for crown molding, trim work, plumbing, and a variety of other carpentry applications.
  • 100% RISK-FREE - The 1/4-Inch thick aluminum alloy is stronger and won't bend like the plastic ones | Backed by our Lifetime Limited Warranty for your complete peace of mind!
SaleRank No. #7
POWERTEC 71005 Deluxe Table Saw Miter Gauge
  • INCLUDES: (1) Table Saw Miter Gauge
  • FUNCTION: Provides you with a premium table saw miter gauge replacement that allows you to make crosscuts at any angle with high precision
  • FEATURES: Positive stops at all common angles for exceptional accuracy, a large ergonomical grip for control and comfort, set screws to remove any play, and a tip resistant washer to keep the unit steady when extended over your work surface
  • COMPATIBILITY: Fits and accommodates most standard 3/4 x 3/8 inch miter slots, with or without t-slotted miter slots, including DeWalt, Delta, Jet, Craftsman, Bosch and other brands of table saw and router table slots
  • PREMIUM BUILD: Made with a combination of a high quality aluminum head and solid steel miter bar, this woodworking gauge was built for professional use and long-term durability
Rank No. #8
POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops
  • INCLUDES: (1) Miter Gauge for Table Saw
  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit.
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots.
Rank No. #9
Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc
  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through. If your saw does not have a “T” slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
SaleRank No. #10
Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10
  • Ryobi Part # 089037007707
  • ass'y miter gauge
  • Always Check Owners manual For Proper Part number
  • Compatible with :Ryobi RTS10 10 Inch Table Saw
SaleRank No. #11
Fulton Safety Woodworking Push Block and Push Stick Package 5 Piece Set In Safety Orange Color, Ideal for Woodworkers and Use On Table Saws, Router Tables, Jointers and Band Saws
  • This 5 piece safety kit is designed to be your essential safety protection to help from getting to close to the cutters or blades on a router table, shaper, band saw, table saw and jointer. From the narrow v-style push stick, to the beefy long push block, this kit has all the bases covered in regards to many different woodworking applications.
  • Each device in this kit is intentionally made in the SAFETY ORANGE color for high visibility when in use. This provides the user the ability to see exactly there hands are at during the cutting or milling process. Being SAFETY ORANGE also allows for you to easily find the device when its not in its normal location.
  • The general idea behind these safety devices is to help you guide and control your stock when feeding through a table saw, band saw, jointer or a router table. The push blocks are generally used on jointers and some router applications, while the push sticks are primarily used on table saw projects. All five devices help prevent kickback and protect your fingers and hands during your cutting process
  • Soft, receptive, rubber foam pads line the bases of the two small push blocks and the large push block. The rubber soles make pushing and controlling your stock much easier and safer then when doing it by hand. The soles are also washable with with warm water. Must let the rubber soles dry for 24 hours prior to using them again.
  • The 5 piece safety kit includes 2 each small push blocks (1 angled handle and 1 offset handle small push block), 1 each long or large push block, 1 each standard width push stick and 1 narrow width safety-v push stick.
Rank No. #12
Taytools 506005 5 Piece Set Solid Brass Set Up Bar Gauge Blocks 1/8, 3/16, 1/4, 3/8 and 1/2 Inches, All 2-1/2 Inches Long
  • Set up gauge bars are the simplest way to set fence and cutter height
  • The risk of damage to a carbide cutting edge is greatly reduced because brass is much softer than the tool
  • Sizes are 1/8”, 3/16”, 1/4”, 3/8” and 1/2” square, and they may be stacked for a wider range of sizes
  • At 2-1/2 inches long these blocks are plenty long enough to bridge the gap between the cutter and the table around it
  • Comes in a handy storage compartment.
SaleRank No. #13
Big Horn 14605 Standard Track Miter Gauge
  • Fits Most Standard 3/4" x 3/8" track , Degree angle range: 30°90°
  • Material: Die casted zinc alloy & steel bar
  • Positive stops: 30°, 45°, 60°, 75°, 90°
  • Surface finish: black oxide
  • Accuracy: one scale is 5° , measuring size: 30°90°
Rank No. #14
POWERTEC 71394 Miter Slot Hardware Kit | Fixture Locking Woodworking Jigs & Accessories
  • Includes: (2) aluminum slot bars, (2) 5-Star Knobs with Brass Inserts, Plus 5/16” screws and washers
  • Function: allows you to build and customize your own short jigs and hold-downs for your woodworking projects
  • T-slot components: long miter slot bars fit both square and t-shaped miter gauge slots, and expand in the slot as you tighten the knob
  • Versatile: ideal for attaching featherboards, hold-downs and special woodworking jigs to your table saw, Router table, disc sander or any other tool with a standard 3/4" Wide x 3/8" Deep miter gauge slot
  • Perfect fit: when properly tightened, this fixture locking kit produces a tight and secure fit in the miter slot
Rank No. #15
Kreg KMS7303 30-Inch Jig and Fixture Bar
  • Perfect for building workshop jigs and fixtures
  • Screws along the bar adjust easily to compensate for any "play" in the miter gauge slot
  • Mounting holes every 4" (101mm) along bar length
  • Fits standard 3/8" (9mm) x 3/4" (19mm) miter gauge slots
Rank No. #16
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8” in diameter and is just shy of 1/8” to fit into to the “T” slot to prevent accidental lifting when feeding your stock through.
  • Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
  • Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
Rank No. #17
8-1/4 X 5/8 X 40 FINISH
  • The product is 8x40T Diablo Blade
  • Easy to use
  • The product is manufactured in Italy
  • Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
  • Laser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
Rank No. #18
Anodized Aluminum Miter T Track w/T-Bar Rail for Jigs Fixtures Sleds Router Tables and General Woodworking 32 inch MADE IN THE USA
  • When building sleds or fixtures, workshop tables, router table tops or any type of jig or fixture that helps hold stock in place or helps feeding stock through a cutter, miter t track will help make it so much easier. Miter T Track does this by allowing devices like miter gauges to effortlessly slide through the track for cutting applications and it can also accept fixtures with the proper hardware like featherboards to keep your stock firmly against a fence.
  • The Miter T Track has a “T” shape to it so that it can accept the discs on the ends of many miter gauges. This essentially means that your ¾” x 3/8” bar on your miter gauge will fit neatly into this track even with the disc on the end. Of course you don’t have to have a bar with the disc on the end. Wether you’re making a table top for your router, your band saw or simply building a sled, a standard ¾” x 3/8” thick bar will do the trick!
  • The “T” shape on the Miter Track also accepts the T-bar. The T-bar has been designed to fit neatly into the miter track profile for use with jigs, fixtures or sleds. The T-bar is made from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures.
  • Miter T Track is often used in woodworking applications but can be used most anywhere throughout a workshop setting. It is the ideal solution for router tables in need of a miter slot for miter gauges. The ¾” wide slot accommodates most miter gauges which makes it super handy for any workshop. Many woodworkers and professionals alike build jigs or sleds with UHMW bars on the bottom that fit right into this miter track.
  • When we decided to start manufacturing aluminum tracks many years ago (well over 20 years), we thought that it was very important to do our best to keep the manufacturing process here in the United States. We are proud to say that even after 20 years, we manufacture all of our anodized aluminum track (including this Miter T Track) here in the USA. This helps our customers know that not only are they supporting the economy, but also receiving a high quality product.
Rank No. #19
Big Horn 14600 3/4" x 3/8" Standard Track Miter Gauge
  • Standard 3/4" x 3/8" track | Degree angle range: 0°90°
  • Material: CNC machined aluminum & steel
  • Positive stops: 0°, 22.5°, 30°, 45°, 60°, 67.5°, 90° (common angle)
  • Surface finish: anodize
  • Accuracy: one scale is 1° | measuring size: 0°90°
Rank No. #20
ZEROPLAY Miter Bars by MICROJIG (Double Pack)
  • Build table saw sleds fast
  • No slop, side-to-side play or seasonal warping
  • Top-down installation for easy and fast mounting to jigs, fixtures and sleds
  • ZEROPLAY Miter Bars will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0. 73" and 0. 79" wide and at least 5/16" deep
  • Made in the USA

Last update on 2021-08-29 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 5 8 Miter Gauge Bar for our consumer to review. The reports above show ratings of the best overal, best cheap 5 8 Miter Gauge Bar to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.