The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 3Rd Gen 4Runner Upper Ball Joint Replacement of 2020 – Consumer Guide & Reviews

Rank No. #1
ACDelco 45D0116 Professional Front Upper Suspension Ball Joint Assembly
  • One-piece forged housing for strength
  • Undergo extreme impact, wear, and fatigue testing to ensure quality and durability
  • Greaseable design for long life
  • Coated for corrosion resistance and long life
  • Manufactured at TS 16949-certified facilities to ensure consistent high-quality
Rank No. #2
GENUINE TOYOTA 4RUNNER OEM FRONT LH+RH LOWER BALL JOINTS 43330-39585 43340-39465
  • 43330-39585 / 43340-39465
  • 4333039585/4334039465
  • Toyota OEM Front Suspension Lower Ball Joint Set
  • Toyota
  • Genuine OEM
Rank No. #3
SPC Performance 25460 Control Arm, Upper
  • Fit type: Upper
  • Package Dimensions: 39.37 H x 12.192 L x 35.56 W (centimetres)
  • Country of Origin : United States
  • Package Weight: 8.278 kilograms
Rank No. #4
Detroit Axle - 4WD 13pc Front End Suspension Kit Upper Control Arm Lower Ball joints Inner outer Tie rods Sway bar links 4Groove Pitman Idler arm Replacement for Chevy Silverado GMC Sierra 1500 4WD
  • For - 4WD 1999 2000 2001 2002 2003 2004 2005 2006 2007 Chevy Silverado GMC Sierra 1500 4x4
  • For - 4WD 2002-2006 Cadillac Escalade - [2001-2007 Chevrolet Avalance 1500] - 1999-2000 Silverado 1500 - [2001-2006 Silverado 1500 (4WD Standard & Extended Cab)] - 2007 Silverado 1500 Classic (4WD Standard & Extended Cab) - [2000-2006 Suburban 1500] - 2000 Tahoe - [2001-2006 Tahoe] - 1999-2000 GMC Sierra 1500 - [2001-2006 GMC Sierra 1500 (4WD Standard & Extended Cab)] - 2007 GMC Sierra 1500 Classic (4WD Standard & Extended Cab) - [2000-2006 GMC Yukon] - 2000-2006 GMC Yukon XL 1500
  • 4-Groove Steering Pitman Arm (Please verify you have a 4 groove Pitman Arm) 4WD 4X4 6-LUG ONLY
  • Both (2) Front Ider Arm + Front Idler Arm Bracket Assembly Both (2) Front Stablizer Sway Bar End Links
  • Highest Quality - 10 Year Warranty - Same Day Shipping
Rank No. #5
Detroit Axle - Front Upper Control Arm With Ball Joint + Inner And Outer Tie Rods + Sway Bar Links Replacement For Cadillac ESV Chevy GMC Silverado Suburban Sierra Yukon XL 1500 Tahoe Yukon - 12pc Set
  • This Is Direct Replacement Not For Classic Body Styles - For Steel Upper Control Arms Only! Detroit Axle Is A Leading Supplier Of Ride Control Products To OE Vehicle Manufacturers Nationwide, That Expertise Translates To Detroit Axle's OE-Quality Aftermarket, Control Arms, Suspension Kit, Front End Kit, Front Ball Joint, Front End Rebuild Kit
  • Replacement for 2007 2008 2009 2010 2011 2012 2013 2014 Cadillac Escalade ESV Chevy GMC Suburban Yukon XL 1500 Control Arm Kit Sway Bar Link Inner Outer Tie Rods Suspension Kit 2007 2008 2009 2010 2011 2012 2013 2014 Tahoe Yukon Control Arm Ball Joint Assembly Tie Rod Sway Bar Link Kits Boots
  • Compatible With 2007 2008 2009 2010 2011 2012 2013 Cadillac EXT Chevy Avalanche Control Arm Front Stabilizer Bar Inner Tie Rod Outer Tie Rod Ends 2007 2008 - 2013 Chevy GMC Silverado Sierra 1500 [Excludes Classic Models] Front Control Arm Kit Suspension Rod Stabilizer Bar Link Boot And Ball Joint Front Suspension Kit
  • Kit Includes: 2x Front Upper Control Arm With Ball Joint + 2x Front Sway Bar End Links + 2x Front Lower Ball Joints + 4x Front Tie Rods + 2x Rack And Pinion Boots
  • 10 Year Warranty on Front Suspension Kit. Detroit Axle Suspension Kits Are Ready To Meet The Rigorous Demands Of Today’s Foreign And Domestic Passenger Cars, Trucks And SUVs.
Rank No. #6
Detroit Axle - Front Upper Control Arms + Inner And Outer Tie Rods + Sway Bar Links + Pitman & 2.5" Bolt Idler Arm Replacement For Ford Expedition F-150 F-250 Lincoln Navigator [4WD Only] - 14pc Set
  • This Is Direct Replacement For 4WD/4x4 Models Only! Compatible With 1997-2002 Ford Expedition Control Arm With Ball Joint Tie Rods Inner And Outer Suspension Kit 1997-2003 Ford F-150 Inner Outer Tie Rods Pitman Idler Arms Front Suspension Kit 2004 Ford F-150 Heritage Control Arm Kit Stabilizer Bar Link Steering Rod Ends
  • Compatible With 19971998 1999 Ford F-250 Front Upper Suspension Control Arm Sway Bar End Links Tie Rod End Front End Kit 1998 1999 2000 2001 2002 Lincoln Navigator Front End Kits Outer Tie Rod Ends Inner Tie Rod Upper Control Arm Ball Joint Assembly Idler Arm Front End Rebuild Kit - 4WD Models ONLY
  • Kit Includes: 2x Front Upper Control Arm Kit + 2x Front Sway Bar + 4x Front Tie Rod End + 2x Tie Rod Adjusting Sleeves + 2x Idler Arm And Pitman Arm Kit [2.5" Bolt Pattern Idler Arm] + 2x Front Lower Ball Joints
  • Complete Control Arm Assembly Pre-assembled With Bushings, Mounts & Ball Joints (when Applicable) - No Additional Parts Or Tools Required For Installation
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket10-Year Warranty on Detroit Axle Front Suspension Kit. Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket
Rank No. #8
Old Man Emu 2885 Coil Spring
  • COIL PRADO 4/03 ON-FTOYOT
Rank No. #9
Supreme Suspensions - Full Lift Kit for Toyota 4Runner 3" Front Lift Aircraft Billet Strut Spacers + 2" Rear Lift High Density Polyurethane Spring Spacers 2WD 4WD (Black)
  • COMPATIBLE WITH 2003 - 2019 Toyota 4Runner (2WD 4WD) and 2007 - 2015 Toyota FJ Cruiser (2WD 4WD). *Does NOT fit 4Runner 2018+ TRD PRO Model or any Limited models with X-REAS hydraulic struts.
  • CONTENTS: (2x) T6 Aircraft Billet Aluminum Front Strut Spacers, (2x) High Density Polyurethane Spring Spacers, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 3 inch front and 2 inch rear suspension lift. IMPORTANT: *Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved.
  • INSTALLATION: Easy bolt-on installation takes 2 to 4 hours without the need for special tools. *An alignment is always recommended after altering the height of your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires.
Rank No. #10
Auto Ventshade 94751 Original Ventvisor Side Window Deflector Dark Smoke, 4-Piece Set for 1996-2002 Toyota 4Runner
  • Lets fresh air in and keeps rain out; Allows fresh air to circulate removing stale air and odors
  • Reduces interior wind noise and mirror fogging; Allows window to be cracked, reducing heat build up in parked vehicles
  • Precision-engineered and custom molded for an exact fit; Tinted, reinforced acrylic is UV and scratch-resistant
  • No special hardware or drilling required, attaches with 3M automotive-grade adhesive
  • Proudly made in the USA and backed by a Limited Lifetime Warranty
Rank No. #11
Specialty Products Company 25480 Upper Control Arm for Toyota 4Runner and FJ - Pair
  • Provides an additional +/- 2 degree of camber and 0 degree to +4 degree of caster change
  • Built with an OE style ball joint and bushings
  • Designed to correct alignment angles
  • Hybrid tubular and forged steel design is tough enough to race - on or off-road
  • Includes Left and Right arms - 1 per axle
SaleRank No. #12
Moog RK620188 Control Arm and Ball Joint Assembly
  • EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
  • INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
  • LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
Rank No. #13
Genuine Toyota (43340-39465) Ball Joint Assembly
  • Vehicle Specific
  • Manufacturer
  • Toyota Quality Assured
  • OEM, Not After Market
  • Manufacturers Design and Fit
Rank No. #14
Freedom Off Road Front Upper Control Arms for 2-4” Lift 00-10 GM 2500 HD 3500 HD
  • Freedom Off-Road front upper control arms are designed to provide superior strength over factory with 1.5” tubing while correcting ball joint angle and castor for vehicles lifted 2-4”.
  • Replaceable heavy duty OE style fixed position greaseable ball joints and hardened rubber bushings provide a responsive ride feel.
  • All front upper control arms are backed by our hassle-free lifetime warranty.
  • Sold as a pair.
Rank No. #15
Detroit Axle - 12-Piece Front Suspension Kit (2WD ONLY) - 2 Upper Control Arm & Ball Joint, 2 Lower Ball Joint, All 4 Tie Rod, 2 Sway Bars, 2 Tie Rod Boots
  • 2WD Models Only - Built After 11/30/04
  • THIS KIT PROVIDES STRAIGHT SWAY BARS.
  • Pair 2 Upper Control Arms w/Ball Joints, Pair 2 Lower Ball Joints, Pair 2 Front Sway Bar End Links "Straight Type"
  • All 4 Inner and Outer Tie Rods, 2 Rack Boots
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket
Rank No. #16
Genuine Toyota Accessories PT769-89110 Mudguard
  • And Vehicle Specific
  • Manufacturer Warranty
  • Toyota Quality Assured
  • OEM, Not After Market
  • Vehicle Specific
Rank No. #17
Ranch Hand GGT16MBL1 Legend Series Grille Guard
  • Gives Your Vehicle that Custom Off-Road Look
  • Solid Steel Construction
  • Quality Made in the United States
Rank No. #18
Freedom OffRoad Front Upper Control Arms for 2-4” Lift 2003+ 4Runner 2007+ FJ
  • Pair of upgraded heavy dutytubular upper control arms
  • Includes ABS brackets
  • Designed for 2-4” lift
  • Lifetime warranty
Rank No. #19
Spectra Premium ST316 Fuel Tank Strap
  • Unit is designed to Original Equipment (OE) fit, form and function requirements
  • Developed and tested to guarantee a perfect fit
  • Direct fit ensures safe, secure fuel tank installation
  • Product individually packaged and labeled to help reduce product damage prior to installation
Rank No. #20
Genuine Toyota 75552-04063 Roof Molding
  • Direct Fit
  • Genuine OEM Factory Original part
  • Guaranteed against poor workmanship and material defects
  • Japan
  • Fit type: Vehicle Specific

Last update on 2020-10-22 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 3Rd Gen 4Runner Upper Ball Joint Replacement for our consumer to review. The reports above show ratings of the best overal, best cheap 3Rd Gen 4Runner Upper Ball Joint Replacement to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.