The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 1999 Ford Explorer Body Lift Kit of 2020 – Consumer Guide & Reviews

Rank No. #1
TORCH 3" Front 2" Rear Leveling Lift Kit for 1995-2001 Ford Explorer Add-A-Leaf
  • FITS: 1995-2001 Ford Explorer 4X4 and 2WD TORSION BAR SUSPENSION MODELS ONLY.
  • CONTENTS: Front 1"-3" Adjustable Front Lift Kit, TORCH "Add-A-Leaf" Spring (for 1.5"-2" of lift), Extended Alignment Pins and Hardware, Isolator Pads ***Please make sure you have at least 1/2" of thread remaining on factory U bolts. Leafs are 2/5" thick (message us if you have any questions)
  • INSTALLATION: Bolt on kit. Comes with step by step instructions for the DIY backyard mechanic.
  • Ships Same/Next Business Day. 2-3 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!
  • NOTES: Leaf springs will provide about 1.5"-2" of lift depending on leaf pack condition, ***Please make sure you have at least 1/2" of thread remaining on factory U bolts. Leafs are 2/5" thick (message us if you have any questions)
Rank No. #2
Supreme Suspensions - Rear Leveling Kit for 1997-2003 Ford F150 1.5" - 2" Rear Suspension Lift High-Strength Steel Add-A-Leaf Kit (21" Short AAL) + Square Bend U-Bolts 4WD
  • COMPATIBLE WITH 1997 - 2003 Ford F150 (4WD). Only fits models with single-pin leaf packs.
  • CONTENTS: 2x High-Strength Steel Leaf Packs, 4x Vibration Isolator Pads, 4x Round Bend U-Bolts, Installation Hardware, Installation Instructions and Pro Pack.
  • TECHNICAL NOTES: 1.5-2 inch rear suspension lift, depending on the condition of your leaf packs.
  • INSTALLATION: Easy 'bolt-on' installation takes 1 to 2 hours. A Leaf Spring unloading/compressing tool is required for a safe installation. An alignment is recommended after install.
  • BENEFITS: Supreme Suspensions Add-A-Leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to increase load and towing capacity, minimize squat, and allow for larger custom rims and tires. The included U-bolts eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle, maximizing safety and ensuring that you get the most out of your rear lift.
Rank No. #3
Supreme Suspensions - Rear Leveling Kit for 1981-1996 Ford F150 1.5" - 2" Rear Suspension Lift High-Strength Steel Add-A-Leaf Kit (21" Short AAL) + Square Bend U-Bolts 2WD 4WD
  • COMPATIBLE WITH 1981 - 1996 Ford F150 (2WD 4WD). Only fits models with single-pin leaf packs.
  • CONTENTS: 2x High-Strength Steel Leaf Packs, 4x Vibration Isolator Pads, 4x Round Bend U-Bolts, Installation Hardware, Installation Instructions and Pro Pack.
  • TECHNICAL NOTES: 1.5-2 inch rear suspension lift, depending on the condition of your leaf packs.
  • INSTALLATION: Easy 'bolt-on' installation takes 1 to 2 hours. A Leaf Spring unloading/compressing tool is required for a safe installation. An alignment is recommended after install.
  • BENEFITS: Supreme Suspensions Add-A-Leafs are constructed from heat-treated, tempered steel and can be added to your existing leaf spring packs to increase load and towing capacity, minimize squat, and allow for larger custom rims and tires. The included U-bolts eliminate flexing of the leaf spring packs and provide the desired spring stiffness for your vehicle, maximizing safety and ensuring that you get the most out of your rear lift.
Rank No. #4
Supreme Suspensions - Adjustable 1" to 3" Front Lift Kit for 1995-2001 Ford Explorer [2WD/4WD] and 2001-2006 Ford Explorer Sport-Trac [4WD] Heavy Duty Steel Re-Indexed Torsion Keys
  • COMPATIBLE WITH 1995 - 2001 Ford Explorer (2WD 4WD) and 2001 - 2006 Ford Explorer Sport-Trac (4WD)
  • CONTENTS: (2x) Cold-Forged Steel MAX-Torsion Keys, Installation Instructions, and Supreme Suspensions Pro Pack
  • TECHNICAL NOTES: Adjustable 1 to 3 inch Front Suspension Lift. *An alignment is always recommended if you are altering the height of your vehicle.
  • INSTALLATION: After an easy 1-2 hour installation process, you're ready to feature your new and improved ride! *We recommend the use of a torsion bar tool, or 5 ton gear puller to ensure a safe disassembly of your torsion bar and prevent injuries or damage to your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion Keys will provide an adjustable lift height according to your preference and offer increased strength compared to factory keys.
Rank No. #5
Supreme Suspensions - Adjustable 1" to 3" Front Lift Kit for 1998-2012 Ford Ranger [4WD] and 2001-2005 Ford Ranger Edge [2WD/4WD] Heavy Duty Steel Re-Indexed Torsion Keys
  • COMPATIBLE WITH 1998 - 2012 Ford Ranger (4WD) and 2001 - 2005 Ford Ranger Edge (2WD 4WD). *Does NOT fit models with Stabilitrak System.
  • CONTENTS: (2x) Cold-Forged Steel MAX-Torsion Keys, Installation Instructions, and Supreme Suspensions Pro Pack
  • TECHNICAL NOTES: Adjustable 1 to 3 inch Front Suspension Lift. *An alignment is always recommended if you are altering the height of your vehicle.
  • INSTALLATION: After an easy 1-2 hour installation process, you're ready to feature your new and improved ride! *We recommend the use of a torsion bar tool, or 5 ton gear puller to ensure a safe disassembly of your torsion bar and prevent injuries or damage to your vehicle.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion Keys will provide an adjustable lift height according to your preference and offer increased strength compared to factory keys.
Rank No. #6
Supreme Suspensions - Front Lift Kit for 1998-2012 Ranger & 2001-2009 Ranger Edge Adj. 1" to 3" Front Lift High-Strength Steel Max-Torsion Keys + Torsion Bar Unloading Tool
  • COMPATIBLE WITH 1998 - 2012 Ford Ranger (4WD) and 2001 - 2005 Ford Ranger Edge (2WD 4WD). *Does NOT fit models with Stabilitrak System.
  • CONTENTS: (2x) Cold-Forged Steel MAX-Torsion Keys, (1x) Heavy Duty Torsion Bar Unloading Tool, Installation Instructions, and Supreme Suspensions Pro Pack
  • TECHNICAL NOTES: Adjustable 1 to 3 inch Front Suspension Lift. *An alignment is always recommended if you are altering the height of your vehicle.
  • INSTALLATION: After an easy 1-2 hour installation process, you're ready to feature your new and improved ride! *For a safe & easy installation we included our C-Shaped Tool that will safely release the tension on the front torsion bar, lowering the risk of failure or injury while installing or making adjustments to your torsion keys.
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Our front MAX-Torsion Keys will provide an adjustable lift height according to your preference and offer increased strength compared to factory keys.
Rank No. #7
GOOACC 240PCS Bumper Retainer Clips Car Plastic Rivets Fasteners Push Retainer Kit Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Fender Clips for GM Ford Toyota Honda Chrysler
  • UNIVERSAL FIT KIT - Great Assortment Push Retainer Kit with 12 popular size, fitting for door trim, radiator shield yoke, fender, bumper and splash shield retainers replacement for Ford, GM, Chrysler, Toyota, Honda and more.
  • SAVE TIME AND MONEY - You can find 240PCS automotive push type retainer kit in the box and no need to go to a auto parts store to look for different fasteners. You can remove the old clips using free fastener remover.
  • HIGH QUALITY - High quality material with heavy-duty construction for durability, this push type retainers set would not break or crack easily during use.
  • MOST COMMON SIZES - Don not worry about lost or damaged body fasteners. All the necessary retainers for exact replacement of old and broken retainer.
  • EASY STORAGE - Comes with a plastic box with 12 compartments for organized storage. Compact size, convenient to store or carry with in your car.
SaleRank No. #8
GOOACC 415 Pcs Car Retainer Clips & Fastener Remover - 18 Most Popular Sizes Auto Push Pin Rivets Set -Door Trim Panel Clips for GM Ford Toyota Honda Chrysler
  • WORKS FOR ALMOST ALL SITUATIONS - The kit contains 18 types of most common sizes of fastener clips, suitable for the OEM replacement in 6-10mm hole sizes,that you’ll always have the right size.
  • IMPACT RESISTANT PUSH RIVETS - Well made of durable Nylon plastic, not easy to break or crack like other brands, it is super sturdy!
  • PREFECT FOR WHAT YOU NEED - Up to 415 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
  • TOUGH FASTENER REMOVER- Durable Plastic and Metal material that has advantage of high abrasion resistance,allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
  • WIDE APPLICATION - Professional push clips are widely used for car panel, door trim, bumper and fender for GM Ford Toyota Honda Chrysler etc. Please feel free to contact us if there's any issue, we'll provide 100% satisfactory service.
Rank No. #9
Superlift 9637 Component Box For PN[K358/K494/K495/K496]
  • Precision engineered for your vehicle
  • Tested to outperform all comparable products on the market
  • Made from premium materials to endure years of abuse
  • Improves your vehicle's handling
  • Designed for perfect fit and function
Rank No. #10
EZ Flares XL – The Original Universal Flexible Foam Rubber 2-Inch Fender Flares
  • ENHANCE & PROTECT YOUR RIDE – The universal fender EZ Flares XL are a fast, easy, and low-cost way to give your car an aggressive, off-road look! Universal compatibility allows it to be installed on virtually all makes and models.
  • FAST & EASY INSTALLATION – Just 3 easy steps and you’ll extend your fender trim by up to 2 inches! No drilling or screws are required. Features patented InvisiEdge technology for a seamless & professional installation.
  • HANDLES ALL CONDITIONS & WEATHER – EZ Flares XL will help protect your paint from driveways, speed bumps, and curbs. The tough & durable Dura-X Foam rubber easily withstands car washes, high speeds, and any temperature you put it through.
  • MEASURE BEFORE ORDERING – Each roll has 8.5 feet of material, which will cover about two fenders. To cover all four fenders, please note you will need to order two units/rolls.
  • MADE IN USA – Designed and manufactured in the USA with top quality materials and craftsmanship. Your style and the durability of the product is always front of mind in every EZ Flares that’s made.
SaleRank No. #11
Bully BBS-1103 Universal Truck Black Powder Coated Side Step Set, 2 Pieces (1 Pair), Includes Mounting Brackets - Fits Various Trucks from Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM and Jeep
  • Supreme Support – Made from cast aluminum for superior strength with no welded seams and a 350 lb. weight limit to provide maximum strength
  • Rugged Sophistication – Cast from one-piece of chrome plated aluminum, bully steps provide easy, safe access to your cab even in extreme conditions. The extra-deep step is rated to 350 pounds.
  • Features our motac (motion activated illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced battery life
  • Customizable – Lightweight aluminum is durable and paintable
  • Comes in Pairs – You will receive two pieces for your Trucks and SUVs. All Mounting Hardware and DIY Instruction Included
Rank No. #12
Nilight - ZH007 Led Light Bar 12 Inch 72W Spot Flood Combo With Off Road Wiring Harness, 2 years Warranty
  • Brighter beyond expectation: high-quality LED chips, Super bright and powerful white light to let your see the forward dark road clearly
  • Excellent lighting effect: combination of spot and flood beam, further irradiation distance and wide range of light for broad view area
  • Adjustable mounting bracket: the light bar can be adjusted to about 45 degrees, which makes changing direction of light beam easier
  • Two Available leads: with 2 Sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable
  • Package include: 1Pc 72W Combo LED light bar and 1Pc wiring harness kit
Rank No. #13
GOOACC Engine Under Cover Push-Type Retainer for Lexus & Toyota Clips 90467-07201 OEM Replacement Fasteners - 40PCS
  • Good quality: made from Black nylon, more durable that would not break or crack easily. Small Things but great use, satisfy your demands
  • High precision: can hold your parts very tightly, won't be loose as the time passing by, also can be easily removed without causing damage
  • OEM REPLACEMENT - #90467-07201 for engine splash shield, undertrays, chasis covers or heating box
  • Universal plastic clips: be widely used for door trim, radiator shield yoke, fender, bumper, grille and splash shield retainer replacement.FITS FOR SELECTED TOYOTA & LEXUS MODELS
  • Package include:40PCS nylon fastener rivet clips
SaleRank No. #14
Marsauto 194 LED Light Bulb 6000K 168 T10 2825 5SMD LED Replacement Bulbs for Car Dome Map Door Courtesy License Plate Lights (Pack of 10)
  • Fit bulb size: T10, 147, 152, 158, 159, 161, 168, 175, 184, 192, 193, 194 2825 W5W, 194 LED bulb can fit map light, dome light, license plate light, trunk light, courtesy light
  • Notice: 194 led bulbs could fit most of positions of car, do not fit all positions of your car, according to the year and model of your car, please double check owner's manual, for 12V vehicle
  • Better beam pattern: each bulb has 5 pcs high power SMD led, color temperature: 6000K(xenon white), voltage: 12V
  • No polarity no flip: it is truly no polarity, can light on two sides, no need more modification or flip, plug and play, easy install within 5 minutes
  • Tips: 10 packs of 194 led bulbs of one set, for some vehicles, It may need a canbus decoder to fix flickering or error code
Rank No. #15
Auxbeam LED Light Bar 7Inch 36W Flood Led Off Road Lights Driving Lights LED Work Lights Waterproof for Jeep Off-Road SUV Truck Car ATVs Boats (2 PCS)
  • Perfect Design: The flood light bar with 12*3W LED chips; Total of 36W at 6,500K color temperature with 2520 Lumens. Lighting the entire forward viewing area, giving greater visibility without eye fatigue.
  • Super Safe: 7" LED Light Bar was designed to withstand any condition, 6063 aluminum body for strength.
  • Long Service Life: the energy efficient design paired with a quick cooling heat sink effectively extends the Bar's life-span beyond 50,000 hours.
  • Waterproof: IP67 rated waterproof flood led bar is protected from dust and capable of withstanding water immersion up to 3 feet for 30 minutes.
  • Application: It can apply to different types of trucks, off-road vehicles, 4x4, military, mining, boating, farming, and heavy equipment etc.
SaleRank No. #16
Daystar, Ford Explorer Polyurethane Body Mounts, fits 1991 to 2001 2/4WD, KF04009BK, Made in America,Black
  • Maintains proper body and frame alignment
  • Increases performance and handling characteristics
  • Vehicle fluid and road grime resistant
  • Superior to stock replacement rubber mounts
Rank No. #17
Supreme Suspensions - 2" or 3" Height and 2.5" to 3.5" Width Adjustable Front Bar-Pin Shock Mount Extender Kit for 1995-2003 Ford Explorer with Bar-Pin/Tie-Bar Mounted Shocks 4x2
  • COMPATIBLE WITH 1995-2003 Ford Explorer 2WD Only
  • CONTENTS: 4x High-Strength Steel Shock Mount Extension Brackets, 4x High-Strength Steel 1" Additional Spacers, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: 2-3" Adjustable Bar-Pin Shock Mount Extender Kit. Mounting bolt spacing can be adjusted anywhere between 2.5" and 3.5".
  • INSTALLATION: Installation is easy and takes between 1 - 2 hours. No special tools are required.
  • BENEFITS: Reduces over extending pistons so that your factory shocks can be reused without compromising ride quality.
SaleRank No. #18
RBP RBP-R1S1001R Black Universal Truck Aluminum Side Hoop Step 1 Piece Includes Mounting Brackets - Fits Various Trucks from Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM and Jeep
  • Package Dimensions: 12.5 L x 5 H x 11 W (inches)
  • Package Weight: 3.7 pounds
  • Country of Origin : China
  • Part Number: RBP-R1S1001R
Rank No. #19
WARRIOR 153 Rear Gray Heavy Duty Shackle
  • Mounting Hardware
  • Package Weight: 10.8 pounds
  • Color : Gray
  • Made in United States
SaleRank No. #20
ReadyLift 66-2020 2.25" Leveling Kit W/Forged Torsion Key - Ford Ranger Explorer Sport Trac 1998-2011
  • Ready LIFT leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear
  • Torsion keys are forged for ultimate strength and powder coated for lasting corrosion protection
  • Installs easily in about an hour - professional install recommended
  • Max Lift: 2. 25" - Max Tire Diameter 32"
  • against manufacturer defects in materials and workmanship for the life of your vehicle

Last update on 2021-03-31 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 1999 Ford Explorer Body Lift Kit for our consumer to review. The reports above show ratings of the best overal, best cheap 1999 Ford Explorer Body Lift Kit to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.