The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 1911 American Flag Grips of 2020 – Consumer Guide & Reviews

Rank No. #1
Cool Hand 1911 Patriotic Grips with USA Flag, Full Size (Government/Commander), Screws Included, High Polished Acrylic, Ambi Safety Cut
  • 1. 1911 Government Grips with USA Flag.
  • 2. Free Screws for 1911: 4 screws, 4 o rings, T10 Torx keys included.
  • 3. High polished acrylic, not slippery, not easy scratch.
  • 4. These grips fit most 1911 Full Size (Government) on the market.
  • 5. Meas. between two center holes: 3 1/16", thickness: 1/4".
Rank No. #2
GunSkins Pistol Accent Skin - Premium Vinyl Gun Wrap with Precut Pieces - Easy to Install and Fits 1911-100% Waterproof Non-Reflective Matte Finish - Made in USA - Proveil Victory Grey
  • FITS ANY 1911 – Pistol Accent Skins conform to any shape. Designed to fit any semi-automatic pistol, even airsoft guns. The kit includes pieces for the left and right grips, one piece for the slide, and 6 pistol mag skins. Trimming may be required for the perfect fit.
  • EASY TO INSTALL VINYL WRAP – Do it yourself installation means you have creative control. Choose how much or how little to wrap with the help of our one-of-a-kind precut templates and installation videos. Use a heat gun to conform the vinyl to the surface and a hobby knife to trim to fit. Install in just a few hours. No cure time, ready for immediate use!
  • WATERPROOF NON-REFLECTIVE MATTE FINISH – GunSkins are made from high-performance, premium vinyl. This automotive grade vinyl is 100% waterproof and non-porous. This is perfect for hunting waterfowl when you are knee deep among the reeds. No rain, no rust, no worries!
  • REMOVEABLE AND LEAVES BEHIND NO RESIDUE – This non-permanent finish will not alter the resell value of your gun. If you need to take it off, simply add heat and remove. The surface will be just as it was prior to installation. Switch patterns for different hunting seasons with ease!
  • LIFETIME WARRANTY – This GunSkins product has a Lifetime Warranty which covers normal use by the initial user of this product. This GunSkins product will be free of fading for the duration of the warranty period as long as initial user has the product correctly installed on a firearm, firearm accessory or other GunSkins approved application.
Rank No. #4
Custom 1911 Full Size A2 Diamond Polish Ergonomic SPD Acrylic Grips God and Country Colt Taurus Sig Kimber
  • NEW 1911 A2 Diamond Polish Ergonomic Molded Hand Grips are made to fit 1911 full size frames regardless of which side the safety lever is on - Each package contains one set of grips and three spacer back plates that are used to accommodate the safety levers. Screws are not included.
  • SPD grip panels are molded after the 1911 A1 stock grips with rounded contour. Due to the molding process a small blemish is apparent on the bottom of each grip due to the injection process.
  • USING high resolution images in 2400 dpi we are able to make use of unlimited graphics and transfer those images to the back of the grips to protect against wear and tear.
  • CRAFTED by hand our grips are made and shipped within 2 to 3 days excluding weekends and Holidays
  • TO verify our grips will fit your frame we recommend measuring the hole distance center of hole to center of hole. Distance must be 78 mm or approximately 3 1/16 inches
Rank No. #5
Custom 1911 Full Size A2 Diamond Polish Ergonomic SPD Acrylic Grips 2nd Amendment Black Colt Taurus Sig Kimber
  • NEW 1911 A2 Diamond Polish Ergonomic Molded Hand Grips are made to fit 1911 full size frames regardless of which side the safety lever is on - Each package contains one set of grips and three spacer back plates that are used to accommodate the safety levers. Screws are not included.
  • SPD grip panels are molded after the 1911 A1 stock grips with rounded contour. Due to the molding process a small blemish is apparent on the bottom of each grip due to the injection process.
  • USING high resolution images in 2400 dpi we are able to make use of unlimited graphics and transfer those images to the back of the grips to protect against wear and tear.
  • CRAFTED by hand our grips are made and shipped within 2 to 3 days excluding weekends and Holidays
  • TO verify our grips will fit your frame we recommend measuring the hole distance center of hole to center of hole. Distance must be 78 mm or approximately 3 1/16 inches
Rank No. #7
Custom 1911 Full Size A2 Diamond Polish Ergonomic SPD Acrylic Grips The 2nd Amendment Colt Taurus Sig Kimber
  • NEW 1911 A2 Diamond Polish Ergonomic Molded Hand Grips are made to fit 1911 full size frames regardless of which side the safety lever is on - Each package contains one set of grips and three spacer back plates that are used to accommodate the safety levers. Screws are not included.
  • SPD grip panels are molded after the 1911 A1 stock grips with rounded contour. Due to the molding process a small blemish is apparent on the bottom of each grip due to the injection process.
  • USING high resolution images in 2400 dpi we are able to make use of unlimited graphics and transfer those images to the back of the grips to protect against wear and tear.
  • CRAFTED by hand our grips are made and shipped within 2 to 3 days excluding weekends and Holidays
  • TO verify our grips will fit your frame we recommend measuring the hole distance center of hole to center of hole. Distance must be 78 mm or approximately 3 1/16 inches
Rank No. #8
Custom 1911 Full Size A2 Diamond Polish Ergonomic SPD Acrylic Grips American Flag 1 Colt Taurus Sig Kimber
  • NEW 1911 A2 Diamond Polish Ergonomic Molded Hand Grips are made to fit 1911 full size frames regardless of which side the safety lever is on - Each package contains one set of grips and three spacer back plates that are used to accommodate the safety levers. Screws are not included.
  • SPD grip panels are molded after the 1911 A1 stock grips with rounded contour. Due to the molding process a small blemish is apparent on the bottom of each grip due to the injection process.
  • USING high resolution images in 2400 dpi we are able to make use of unlimited graphics and transfer those images to the back of the grips to protect against wear and tear.
  • CRAFTED by hand our grips are made and shipped within 2 to 3 days excluding weekends and Holidays
  • TO verify our grips will fit your frame we recommend measuring the hole distance center of hole to center of hole. Distance must be 78 mm or approximately 3 1/16 inches
Rank No. #9
HKTC Customs Don't Tread on Me Gadsden Flag Laser Carved Maple 1911 Grips American Made
  • Fit's full size/Commander 1911s
  • Light Weight
  • Tough American Maple Hardwood Construction
  • Ergonomic Grip Texture
  • Screw Hold Technology Helps Prevent Screws Shaking Loose Over Time
Rank No. #10
Custom 1911 Full Size A2 Diamond Polish Ergonomic SPD Acrylic Grips Don't Tread on Me Colt Taurus Sig Kimber
  • NEW 1911 A2 Diamond Polish Ergonomic Molded Hand Grips are made to fit 1911 full size frames regardless of which side the safety lever is on - Each package contains one set of grips and three spacer back plates that are used to accommodate the safety levers. Screws are not included.
  • SPD grip panels are molded after the 1911 A1 stock grips with rounded contour. Due to the molding process a small blemish is apparent on the bottom of each grip due to the injection process.
  • USING high resolution images in 2400 dpi we are able to make use of unlimited graphics and transfer those images to the back of the grips to protect against wear and tear.
  • CRAFTED by hand our grips are made and shipped within 2 to 3 days excluding weekends and Holidays
  • TO verify our grips will fit your frame we recommend measuring the hole distance center of hole to center of hole. Distance must be 78 mm or approximately 3 1/16 inches
Rank No. #11
Cool Hand 1911 Full Size G10 Grips, Free Screws Included, Mag Release, Ambi Safety Cut, Sunburst Texture, Brand, Light Grey/Black
  • 1. Free Screws: 4 screws, 4 o rings,T10 Torx keys included.
  • 2. CNC machined from non slippery G10.
  • 3. These grips fit most 1911 Full Size (Government) on the market.
  • 4. Sunburst texture,aggressive.
  • 5. Meas. between two center holes : 3 1/16", thickness: 1/4".
Rank No. #12
Premium Gun Grips 1911 Pearl Colt Gov. & Clones Taurus, S&W, Springfield, Rock Island MOP Full Size w/Revolutionary US Flag
  • 3D Image
  • Stunning High Def image of Betsy Ross' Revolutionary Flag
  • Wood Frame
  • Easy Install
Rank No. #13
Custom 1911 Compact Ambi & Non-Ambi fit Acrylic Grips American Flag 1 Colt Sig Springfield S&W
  • SPD’s custom 1911 compact carry grips are cut from acrylic and will accommodate the right and/or left safety levers. The compact carry is a smaller version of the full size frames. - each package contains one set of grips
  • Crafted by hand our grips are made and shipped within 2 to 3 days excluding weekends and Holidays
  • Proudly made in the USA this set will fit all 1911 compact frames such as American Tactical, Colt, Kimber, Remington, Rock Island, Ruger, Sig Sauer, Smith & Wesson, Springfield and many other A1 Series manufacturers - These grips will NOT fit STAR, Para-Ord P-14 (other para-ord "double stack" clones) or the LLAMA
  • Using high resolution images, we make use of unlimited graphics and transfer the artwork to the back of our acrylic grips to protect against wear and tear
  • To verify our grips will fit your frame we recommend measuring the hole distance center of hole to center of hole. Distance must be 68 mm or approximately 2 11/16 inches
Rank No. #14
HKTC Customs Flying Flag Laser Carved Maple 1911 Grips American Made
  • Fit's full size/Commander 1911s
  • Light Weight
  • Tough American Maple Hardwood Construction
  • Ergonomic Grip Texture
  • Screw Hold Technology Helps Prevent Screws Shaking Loose Over Time
Rank No. #15
TRUGLO Tritium Handgun Glow-in-the-Dark Night Sights for 1911 Pistols, 260 Front, 450 Rear, Black, One Size
  • UNMATCHED VISIBILITY in low light shooting conditions or complete darkness; GLOWS IN THE DARK—no batteries or light exposure required
  • At night, sights are GLOWING GREEN DOTS; In daylight, sights are standard BRIGHT WHITE DOTS
  • Made of tough, CNC-machined steel with a FORTRESS FINISH COATING for maximum protection
  • SNAG RESISTANT DESIGN fits standard holsters; SQUARE-NOTCH DESIGN is duty proven
  • MACHINED AND ASSEMBLED IN THE USA with quality Swiss Tritium for maximum brightness; 12-YEAR LIMITED WARRANTY; Patented
Rank No. #16
Premium Gun Grips 1911 Grips Colt 1911 Gov. & Clones Taurus, S&W, Springfield, Rock Island Full Size Faux Mammoth Bark
  • Elegant polymer faux mammoth grips
  • Presentation Grade
  • Highly Polished
  • Faux Mammoth Bark
Rank No. #17
Wilson 1911 Valu-Line Sear
  • Package length: 7.366 cm
  • Package width: 11.43 cm
  • Package height: 1.016 cm
  • Product Type: SPORTING GOODS
Rank No. #18
Premium Gun Grips 1911 Full Size Double Diamond Checkered Rosewood w/US Embossed
  • Fits full size 1911 Govt and Clones
  • Embossed US
  • High Grade Rosewood
  • Simple Install
  • Buy Direct from Manufacturer and save
Rank No. #19
Garrison Grip 1911 Colt Full Size and Clones (Grips ONLY) with United WE Stand Medallion Set
  • Very attractive polymer checkered pattern grip. The Garrison Grip 1911 Grips make great gifts. Giving this to active or retired military loved ones or friends is about as good as it gets for a gift. The grips come with a metallic silver draw string gift bag for a perfect presentation
  • Colorful Embedded metal emblem on each grip
  • Quality manufactured bone or Ivory look depending on color.
  • Precision inlets for a perfect fit for all Government Model 1911 A1 pistols. Specifically fit for your firearm for the best carry experience.
  • 100% money back guarantee if you are fully satisfied. Just return the product for a full refund within 60 days. Garrison Grip supplies concealed carry accessories for guns pistols firearms like Smith & Wesson Ruger Glock Taurus Remington Sig Sauer Kahr Springfield Armory Beretta and Hi-Point. Trademark "Garrison Grip" Serial No: 86146227 and "orGUNizer" Serial No: 85695498 and U.S. Trademark "Micro Trigger Stop" Serial No: 87093441.
Rank No. #20
Wilson Combat Govt Bl Bvr-Tail Grip Safety
  • Package length: 10.16 cm
  • Package width: 7.111 cm
  • Package height: 0.508 cm
  • Product Type: SPORTING GOODS

Last update on 2020-11-17 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 1911 American Flag Grips for our consumer to review. The reports above show ratings of the best overal, best cheap 1911 American Flag Grips to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.