The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 12Mm Id Fuel Hose of 2020 – Consumer Guide & Reviews

Rank No. #1
Fuel Line 12mm 0.47" ID NBR Hose Push on Hose 0.7" OD Engines Liner Suitable for Fuel Systems, E85, E10, Coolants, Oil, Air, Methanol and Lubricant, 5 feet
  • ID: 0.47 inch, OD: 0.71 inch, NBR liner hose, 5 feet
  • Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines
  • Working Pressure 2Mpa. Burst Pressure 5Mpa, Handles temperature ranges of -40 to +275 degrees F
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc
  • The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance
Rank No. #2
uxcell Fuel Line Hose Rubber 12mm I.D. 0.9M/3Ft Diesel Petrol Hose Engine Pipe Tubing with 2 Clamps
  • ►【APPLICATION】- Fuel Line Hose mainly used to transport diesel, gasoline, lubricating oil and other mineral oils
  • ►【Advantage】- Fuel Hose has Oil resistant, wear resistant, aging resistant, ozone resistant, soft, lightweight, good bending performance, small deformation, smooth and beautiful appearance
  • ►【FEATURE】- fuel Tube Measures 0.47" inside diameter by 0.75" outside diameter by 2.95-feet total length. 0.14" thin tube wall providing higher flow rates and working pressure
  • ►【 material】- Fuel Pipe made in Rubber, it has the characteristics of high temperature resistance, oil resistance, high vacuum resistance, acid and alkali resistance and resistance to various chemicals.
  • ►【Tips】- ABRASION RESISTANT HOSE is for the transfer of petroleum products. Excellent fuel line for small engines. Great for carburetors!
Rank No. #3
Fuel Line Union Quick Connector Hose Coupler straight for 3/8" ID 12mm 15/32" OD Nylon Hose, Pack of 4
  • Connect nylon line. Fit for 3/8" ID 15/32" OD to 3/8 ID 15/32 inch OD nylon tube hose or gas line
  • Quick connect hose coupler union used to connect 12mm 15/32 inch OD (3/8 ID) nylon fuel hose together
  • Highly Resistant to the Extreme Temperatures
  • Save time and money by repairing only the damaged section, not the entire fuel line
  • Easy to Install, Long Working Life
Rank No. #4
uxcell 1/2"(12mm) ID Fuel Line Hose, 3/4"(19mm) OD 3.3ft Oil Tubing Black for Small Engines
  • Fuel line is used for transporting petroleum products, for conveying gasoline, E-85, diesel, etc.
  • Inner Diameter: 1/2"(12mm) ; Outer Diameter : 3/4"(19mm) ; Length : 3.3ft(1m)
  • Inner wall thickening, high-pressure resistant
  • The Fuel Lines are oil-resistant and pressure-resistant
  • Fuel tubing is lightweight and soft, with good bending performance
Rank No. #5
uxcell Fuel Line Hose Rubber 12mm I.D. 1.8M/6Ft Diesel Petrol Hose Engine Pipe Tubing
  • ►【APPLICATION】- Fuel Line Hose mainly used to transport diesel, gasoline, lubricating oil and other mineral oils
  • ►【Advantage】- Fuel Hose has Oil resistant, wear resistant, aging resistant, ozone resistant, soft, lightweight, good bending performance, small deformation, smooth and beautiful appearance
  • ►【FEATURE】- fuel Tube Measures 0.47" inside diameter by 0.75" outside diameter by 5.9-feet total length. 0.14" thin tube wall providing higher flow rates and working pressure
  • ►【 material】- Fuel Pipe made in Rubber, it has the characteristics of high temperature resistance, oil resistance, high vacuum resistance, acid and alkali resistance and resistance to various chemicals.
  • ►【Tips】- ABRASION RESISTANT HOSE is for the transfer of petroleum products. Excellent fuel line for small engines. Great for carburetors!
Rank No. #6
X AUTOHAUX 6mm ID Hose Barb 12mm Banjo Fitting Fuel Line Adapter for Motorcycle Car 2pcs
  • Designed for excellent brake system fittings.
  • Long lasting durability,easy installation.
  • Banjo Internal Diameter: 12mm
  • Barb Outside Diameter: 7.3mm
  • Suitable for hose ID: 6mm
Rank No. #8
Joywayus 2Pcs 1/2" 12mm Hose ID/Hose Barb 90 Degree L Right Angle Elbow Union Brass Fitting Water/Fuel/Air
  • Adapter for connecting a hose to a hose connection
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
  • Temperatures range from -40 to 160 F
  • Connections: Hose Barb x Hose Barb
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
Rank No. #9
X AUTOHAUX 11.3mm ID Hose Barb 12mm Banjo Fitting Fuel Line Adapter Connector for Car 10pcs
  • 11.3mm ID Hose Barb 12mm Banjo Fitting Fuel Line Adapter.Come with 10 Banjo Fitting.
  • Easy to install and use, strong and secure connection.
  • Made of iron, strong and sturdy, long working life.
  • Each component is precision-machined for trouble-free performance.
  • Application: Fuel Delivery, Engine Modification, Oiling System, Cooling System.
SaleRank No. #10
X AUTOHAUX 3pcs 9.3mm ID Hose Barb 12mm Banjo Fitting Fuel Line Adapter for Motorcycle Car
  • Designed for excellent engine system fittings.
  • Long lasting durability,easy installation.
  • Fitting Adapter Internal Diameter: 12mm / 0.47 inch
  • Bolt Outside Diameter: 9.3mm / 0.37 inch
  • Suitable for hose ID: 8mm / 0.31"(5/16")
SaleRank No. #11
Koehler Enterprises KE4BX 10 Piece Hose Clamp Box (Micro Size 4),silver
  • 300 series stainless steel band provides maximum corrosion resistance to salt and most chemicals
  • Micro size 4, clamping range from 1/4 inch to 5/8 inch (0,56 to 1,59 cm)
  • Ideal for installation in tight-fitting or hard to reach places
  • Suitable for a variety of applications for home, auto and industrial use
  • Versatile and easy to use and maintain
Rank No. #12
NEW DAFU 1/4 Inch 6mm ID NBR Nylon Braided Fuel Line Set,5 Ft+6 Pcs 2/5 Inch ID Hose Clamps,For Motorcycle Kawasaki Kohler Briggs Stratton Small Engines,Boat Marine Outboard Gas Diesel Petrol
  • The Package Includes:1×5 Feet(1.5m) 1/4" 6mm ID fuel line,6 × 2/5" ID 65 Manganese steel spring hose clamps,The dimensions of the two parts are compatible with each other,You can use them directly without additional purchases.
  • Wall thickness is 3mm:Contains 3 layers of material:1.The outer layer is Chloroprene rubber with good elasticity;2.The middle layer is Nylon Braided,Which increases the working pressure (300PSI / 2MPa) and the maximum burst pressure (1200psi / 8MPa);3.The inner layer is NBR,which can increase oil resistance,acid and alkali resistance,and resist various corrosive liquids.The thickened tube makes you feel at ease, No worries about leakage.
  • Our fuel line's main material is: NBR (copolymer of butadiene and acrylonitrile),Which makes our fuel line more resistant to high/low temperature (- 30 °C~120 °C) and aging compared with other common fuel lines,It will not crack and its performance ↑ 50%.No matter in extremely cold areas or high temperature desert, It will always accompany your vehicle to arrive the destination safely
  • The service life can be up to 9 years,3 times more than the other ordinary fuel lines,So the fuel line will not leak under any circumstances,And keep good working condition,Don't worry about your vehicle,No matter what questions you have, We will always support you
  • For use in motorcycle mowers tractors snow blowers dirt bikes and all small engines,Use hose and clamps, transfer of petroleum products fuel lines for small engines
Rank No. #13
EVIL ENERGY 1/2 Inch ID NBR Fuel Line Hose 10 Feet Black
  • Size and Material: 1/2" (12mm) ID Fuel Hose, OD: 0.75inch(19mm). Length: 10FT. This Fuel Feed Hose is made of NBR.
  • Working Pressure: 290psi, Burst Pressure: 1160psi, Temperature Range: -40°F to 257°F, Minimum Bend Radius: 4.7inch(120mm).
  • Applicable Medium: It can work with diesel / biodiesel / gasoline / oil / grease / water and air, not recommended with E85, antifreeze, methanoland or methane.
  • Application: widely used in fuel system, oil cooling, steam emission, PCV system, brake vacuum tube, not recommended for outboard motors/boats .
  • EVIL ENERGY provide this product have 3-month warranty. Any problem you might have ,please feel free to contact us via Amazon message.
Rank No. #14
NBR Push on Hose Fuel Gas Line 3/8 inch ID Bag Fuel Liner 5/8 OD 10 feet Length for Small Engines
  • Size: 3/8 inch ID; 5/8" OD; 10 feet Length, black
  • Use hose barbs and clamps, Ideal for transfer of petroleum products fuel lines for small engines
  • For transfer of petroleum products fuel lines vapor emission lines and vacuum smog control
  • For use in mowers tractors snow blowers dirt bikes and just about all small engines
  • NBR Rubber Oil & Heat Resistance Fuel Gas Hose Liner, Works With Push-On Hose End Fittings
Rank No. #15
Wetenex 1/4" Fuel Hose Gas Line Tubing ID 6mm X OD 12mm 10 Feet & 20pcs Clamps for Small Engines Lawn Mower String Trimmer Dirtbike Scooter Motorcycle Snowmobiles ATV UTV Go Kart Generator
  • Fuel line inside diameter: 6mm
  • Gas line outer diameter: 12mm
  • Fuel hose material: rubber, this stuff lasts for a long time, flexibility, soft and easy to work
  • Item include: 10 feet fuel line, 20pcs clamps
  • Customer service: If there are any quality problem, we will provide refund service within 30 days after receiving the goods.
Rank No. #16
Wetenex Fuel Line 1/4" 6MM ID x 12MM OD Gas Tubing Fuel Hose 10 Feet Length for Snowblower Scooter Motorcycle ATV Lawn Mowers Tractors Dirt Bike Quads Generators
  • 1/4 fuel hose inside diameter 6mm
  • 1/4 fuel hose outer diameter 12mm
  • Item include: 10 ft fuel line
  • Customer service: If there are any quality problem, we will provide unconditional refund service within 30 days after receiving the goods.
Rank No. #17
1/2" ID x 3/4" OD - 10 Ft High Pressure Braided Clear PVC Vinyl Tubing Flexible Vinyl Tube, Heavy Duty Reinforced Vinyl Hose Tubing, BPA Free and Non Toxic
  • Heavy Duty - Clear braided hose made of high pressure and high duty PVC with smooth interior and exterior that allows easy flow and flushing, light weight, BPA Free, non-toxic.
  • Hose Detail - Inner diameter: 1/2", Outside diameter: 3/4", 10 ft, Wall thickness: 3.2mm; Hardness: 73A (firm); Temperature Range : 23°F to 149°F (-5°C to 65°C); Working Pressure: 200PSI.
  • Durable Use - The clear braided vinyl tubing walls are thick and flexible enough to prevent kinks, ideal for working in confined areas. High quality material makes it uv-resistant, chemicals resistant.
  • Widely Applications - Flexible Hose applicable to industrial and agricultural, engineering, fish farming, and other fields. Ideal for oil, fuel, water, and air lines dispensing.
  • Excellent Customer Service - Our aim is to provide consumers with more practical and durable hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you’re satisfied.
Rank No. #18
Rierdge 40 Pcs 1/2 Inch ID Spring Band Type Clamps, 12mm Fuel Hose Clamps Fasteners, Black Spring Hose Clip for Fuel Hose Line Water Pipe Air Tube Silicone Hose
  • [ Material ] Made of manganese steel, galvanized surface. Strong, rust-proof, highly durable and environmentally safe, can be used for a long time, excellent flexibility and strength.
  • [ Small & Precise ] Precision design, with a high degree of sealing, polished smooth of the surface, prevent damage to the pipeline effectively.
  • [ Wide Application ] Used to fix and seal interfaces, such as fuel lines for power equipment, air hoses, water pipes, silicone vacuum hoses, machine tools, fire fighting, various mechanical equipment, etc. Suitable for automobiles, agriculture, aviation, material handling, ships and construction.
  • [ Product Size ] Inner Diameter: 0.45 inch / 11.5 mm; Band Width: 0.32 inch / 8 mm. Packing: 40 PCS Spring Band Type Clamps.
  • [ Rierdge Promise ] If you are not satisfied with your purchase at any point and for any reason, please don't hesitate to contact us. We will respond quickly within 24 hours! If within 30 day you are not 100% satisfied return your product for refund! That's the Rierdge Promise.
Rank No. #19
uxcell Lubricating Oil Hose, 8mm(5/16") ID x 12mm(15/32") OD 8.2Ft/2.5M Rubber Water Hose Pipe Tubing Black
  • 【APPLICATION】- Lubricating Line Hose mainly used to transport lubricating oil
  • 【Advantage】- Lubricating Hose has Oil resistant, wear resistant, aging resistant, soft, lightweight, good bending performance, smooth appearance
  • 【BASE INFO】Outside Diameter: 12mm(15/32"); Inside Diameter: 8mm(5/16"); Length: 8.2Ft/2.5M.
  • 【NBR material】- Lubricating Pipe made in NBR,that has the characteristics of high temperature resistance, oil resistance.
  • 【Please Note】- The hose can not transport fuel oil on equipment
Rank No. #20
Tvent 1/4" ID Fuel Line (ID 6mm OD 12mm) Replacement for Kawasaki Yamaha Engine - 10 Foot / 3 Meter
  • 【Size:】Fuel line ID: 1/4 inch (6MM), OD: 1/2 inch (12MM)
  • 【3-layer thickened fuel line】Oil resistant, cold-resistant and ethanol tolerance; Custom Extra long 10 Foot Length (3M) can be cut to size for all your applications
  • 【Wide Application】Replacement for Honda Kawasaki Yamaha engines that use this type filter for motorcycle, lawnmower, power equipment and small engines ect.
  • 【Package include:】 10 Foot 1/4" ID Fuel Line
  • 【Customer Service: 】We provide 180 days money back guarrantee! Lifetime warranty against manufacturer defect!

Last update on 2021-09-11 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 12Mm Id Fuel Hose for our consumer to review. The reports above show ratings of the best overal, best cheap 12Mm Id Fuel Hose to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.