The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 12Mm Id Fuel Hose of 2020 – Consumer Guide & Reviews

Rank No. #1
Fuel Line 12mm 0.47" ID NBR Hose Push on Hose 0.7" OD Engines Liner Suitable for Fuel Systems, E85, E10, Coolants, Oil, Air, Methanol and Lubricant, 5 feet
  • ID: 0.47 inch, OD: 0.71 inch, NBR liner hose, 5 feet
  • Use hose barbs and clamps, transfer of petroleum products fuel lines for small engines
  • Working Pressure 2Mpa. Burst Pressure 5Mpa, Handles temperature ranges of -40 to +275 degrees F
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel fuels in cars, trucks, buses, etc
  • The Fuel Lines are oil resistant,cold-resistant and ethanol tolerance
Rank No. #2
Wetenex Fuel Line 1/4" 6MM ID x 12MM OD Gas Tubing Fuel Hose 10 Feet Length for Snowblower Scooter Motorcycle ATV Lawn Mowers Tractors Dirt Bike Quads Generators
  • 1/4 fuel hose inside diameter 6mm
  • 1/4 fuel hose outer diameter 12mm
  • Item include: 10 ft fuel line
  • Customer service: If there are any quality problem, we will provide unconditional refund service within 30 days after receiving the goods.
SaleRank No. #3
Hose Clamp, 20 Pack Stainless Steel Adjustable 6-12mm Size Range Worm Gear Hose Clamp, Fuel Line Clamp for Plumbing, Automotive And Mechanical Application
  • HIGH QUALITY- The whole hose clamp (including the band, housing and screw) are all made of premium stainless steel material. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable.
  • WIDE ADJUSTABLE SIZE RANGE- Clamps are flexible and ductile with wide adjustable size range from 6-12mm/0.24-0.47 inches. Fit for hose outside diameter 6-12mm.
  • WIDELY USED- Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor.
  • Band width of 5/16-inch better fits small hoses than larger widths.
  • ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place due to the high quality material which makes them worked last for long.
Rank No. #4
X AUTOHAUX 6mm ID Hose Barb 12mm Banjo Fitting Fuel Line Adapter for Motorcycle Car 2pcs
  • Designed for excellent brake system fittings.
  • Long lasting durability,easy installation.
  • Banjo Internal Diameter: 12mm
  • Barb Outside Diameter: 7.3mm
  • Suitable for hose ID: 6mm
Rank No. #5
X AUTOHAUX 8mm ID Hose Barb 12mm Banjo Fitting Fuel Line Adapter for Motorcycle Car 2pcs
  • Designed for excellent brake system fittings.
  • Long lasting durability,easy installation.
  • Banjo Internal Diameter: 12mm
  • Barb Outside Diameter: 9.3mm
  • Suitable for hose ID: 8mm
Rank No. #6
Wetenex 1/4" Fuel Hose Gas Line Tubing ID 6mm X OD 12mm 10 Feet & 20pcs Clamps for Small Engines Lawn Mower String Trimmer Dirtbike Scooter Motorcycle Snowmobiles ATV UTV Go Kart Generator
  • Fuel line inside diameter: 6mm
  • Gas line outer diameter: 12mm
  • Fuel hose material: rubber, this stuff lasts for a long time, flexibility, soft and easy to work
  • Item include: 10 feet fuel line, 20pcs clamps
  • Customer service: If there are any quality problem, we will provide refund service within 30 days after receiving the goods.
Rank No. #7
uxcell Fuel Line Hose Rubber 12mm I.D. 1.8M/6Ft Diesel Petrol Hose Engine Pipe Tubing
  • ►【APPLICATION】- Fuel Line Hose mainly used to transport diesel, gasoline, lubricating oil and other mineral oils
  • ►【Advantage】- Fuel Hose has Oil resistant, wear resistant, aging resistant, ozone resistant, soft, lightweight, good bending performance, small deformation, smooth and beautiful appearance
  • ►【FEATURE】- fuel Tube Measures 0.47" inside diameter by 0.75" outside diameter by 5.9-feet total length. 0.14" thin tube wall providing higher flow rates and working pressure
  • ►【High Quality material】- Fuel Pipe made in Rubber, it has the characteristics of high temperature resistance, oil resistance, high vacuum resistance, acid and alkali resistance and resistance to various chemicals.
  • ►【Tips】- ABRASION RESISTANT HOSE is for the transfer of petroleum products. Excellent fuel line for small engines. Great for carburetors!
Rank No. #8
uxcell Fuel Line Hose Rubber 12mm I.D. 0.9M/3Ft Diesel Petrol Hose Engine Pipe Tubing with 2 Clamps
  • ►【APPLICATION】- Fuel Line Hose mainly used to transport diesel, gasoline, lubricating oil and other mineral oils
  • ►【Advantage】- Fuel Hose has Oil resistant, wear resistant, aging resistant, ozone resistant, soft, lightweight, good bending performance, small deformation, smooth and beautiful appearance
  • ►【FEATURE】- fuel Tube Measures 0.47" inside diameter by 0.75" outside diameter by 2.95-feet total length. 0.14" thin tube wall providing higher flow rates and working pressure
  • ►【High Quality material】- Fuel Pipe made in Rubber, it has the characteristics of high temperature resistance, oil resistance, high vacuum resistance, acid and alkali resistance and resistance to various chemicals.
  • ►【Tips】- ABRASION RESISTANT HOSE is for the transfer of petroleum products. Excellent fuel line for small engines. Great for carburetors!
Rank No. #9
PRO 1 Fuel Line Hose 7/16 Inch Inside Diameter X 5 Feet Length NRB/PVCC SAE30R6
  • 1 5 Foot Piece of 7/16" ID Black Rubber Fuel Line Made in the USA
  • Used for Cars, Trucks, Tractors, or Small Engines
  • Nitrile Tube Construction with 2 Spiral Polyester Reinforcement and PVC/Nitrile Blend Cover
  • Designed for Conveying Gasoline E85 and Diesel Fuel
  • Temperature Resistant from -40 Degrees Fahrenheit to +212 Degrees Fahrenheit
Rank No. #10
uxcell 1/2"(12mm) ID Fuel Line Hose, 3/4"(19mm) OD 3.3ft Oil Tubing Black for Small Engines
  • Fuel line is used for transporting petroleum products, for conveying gasoline, E-85, diesel, etc.
  • Inner Diameter: 1/2"(12mm) ; Outer Diameter : 3/4"(19mm) ; Length : 3.3ft(1m)
  • Inner wall thickening, high-pressure resistant
  • The Fuel Lines are oil-resistant and pressure-resistant
  • Fuel tubing is lightweight and soft, with good bending performance
Rank No. #11
60PCS 12mm 15/32inch Spring Clips Silicone Vacuum Fuel Oil Hose Line Clamps
  • Material: 65 Mn Spring Steel
  • Clip ID: 12mm 15/32inch
  • For fastening pipe, hose fittings and other products
  • Please note: When you choose clamp for your vacuum /fuel hose, Clip ID =< Vacuum Hose OD
  • Quantity: 60 pieces
Rank No. #12
Hose ID 12mm or 7/16" Barb x 1/8" Male NPT Pipe Fuel Gas Fitting Brass
  • Material: Brass
  • Thread End: 1/8" Male NPT Pipe
  • Barb End: 7/16” or 12mm Hose ID
  • Interchange Part Number: Holley 26-59 Russell 69700
  • Package Quantity: 1
Rank No. #13
uxcell 1/2"(12mm) ID Fuel Line Hose, 3/4"(19mm) OD 10ft Oil Tubing Black for Small Engines
  • Fuel line is used for transporting petroleum products, for conveying gasoline, E-85, diesel, etc.
  • Inner Diameter: 1/2"(12mm) ; Outer Diameter : 3/4"(19mm) ; Length : 10ft(3 meter)
  • Inner wall thickening, high-pressure resistant
  • The Fuel Lines are oil-resistant and pressure-resistant
  • Fuel tubing is lightweight and soft, with good bending performance
SaleRank No. #14
5 Pieces Brass Barb Splicer Brass Barb Connection Hose Barb Splicer Hose Barb Connector 12mm I.D. Hose Fitting Straight Hose Connector for Air Gas Water Fuel, Golden
  • Made of quality brass, durable.
  • Color: golden
  • Easy to use, just slide inside each hose, it can connect two hoses of the same diameter.
  • Design with straight shape and barb, good sealings. Fit for hose with an inner diameter of 12 mm.
  • Suitable for connecting lines of water, air, oil, petrol, fuel, gas and other fluids.
Rank No. #15
uxcell Fuel Line Hose 8mm I.D. 1.5M/5Ft Rubber Diesel Petrol Hose Engine Pipe Tubing
  • ►【APPLICATION】- Fuel Line Hose mainly used to transport diesel, gasoline, lubricating oil and other mineral oils
  • ►【Advantage】- Fuel Hose has Oil resistant, wear resistant, aging resistant, ozone resistant, soft, lightweight, good bending performance, small deformation, smooth and beautiful appearance
  • ►【FEATURE】- fuel Tube Measures 0.31" inside diameter by 0.55" outside diameter by 4.9-feet total length. 1/8" thin tube wall providing higher flow rates and working pressure
  • ►【High Quality material】- Fuel Pipe made in Rubber, it has the characteristics of high temperature resistance, oil resistance, high vacuum resistance, acid and alkali resistance and resistance to various chemicals.
  • ►【Tips】- ABRASION RESISTANT HOSE is for the transfer of petroleum products. Excellent fuel line for small engines. Great for carburetors!
Rank No. #16
IZOKEE 1/4" Inch ID Fuel Line Set - 2 Meter / 6-Foot ¼ Inch Fuel Line + 2 Pcs 1/4 Inch & 5/16 Inch Fuel Filters + 10 Pcs 2/5" ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine
  • 【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line; 2 x 1/4" In-Line Fuel Filters; 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!
  • 【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications.
  • 【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power.
  • 【Hose Clamps】Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage.
  • 【Wide Application】Fits selected Briggs & Stratton, Kohler, Craftsman, Simpson, Kawasaki, Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that use this type filter for motorcycle, lawnmower, power equipment and small engines ect.
Rank No. #17
QTEATAK 60 Pcs Fuel Silicone Vacuum Hose Spring Band Type Action Pipe Clamp Low Pressure Air Clip Clamp SIZE: 6mm 9mm 10mm 12mm 14mm 15mm
  • Spring Clips for hose, air hose, water pipe, automotive fuel line, silicone hose, etc.
  • 65Mn Spring Steel
  • 60pcs, 6 sizes, each size 10pcs
  • SIZE:10 x 7mm, 10 x 10mm, 10 x 11mm, 10 x 14mm, 10 x 16mm, 10 x 17mm
Rank No. #18
Hilitchi 72 pcs Spring Band Type Action Fuel/Silicone Vacuum Hose Pipe Clamp Low Pressure Air Clip Clamp (10 x 7mm 10mm 11mm 14mm 16mm 17mm)
  • High Quality Spring Clips for hose air hose, water pipe, automotive fuel line, silicone hose, etc.
  • Material: 65Mn Spring Steel
  • Packing Quantity: 72pcs, 6 sizes, each size 12pcs
  • Package Included: 10 x 7mm, 10 x 10mm, 10 x 11mm, 10 x 14mm, 10 x 16mm, 10 x 17mm
  • Organized Within A Convenient Plastic Storage Case, Plastic Box Can Be Reused
Rank No. #19
The Stop Shop 30R7 Fuel Hose 1/2 Inch I.D. 10 Feet
  • Provides a Constant Working Pressure to 50 psi Regardless of I.D.
  • NOT for Fuel Injection. A multipurpose fuel hose that can be used as a fuel line, PCV connection, emission control line or fuel return line.
  • Temperature range: -40°F to +257°F, -40°C to +125°C
  • Fuel Line, Vapor Emission & Crankcase Ventilation hose
  • Made in USA!
Rank No. #20
NEW DAFU 1/4 Inch 6mm ID NBR Nylon Braided Fuel Line Set,5 Ft+6 Pcs 2/5 Inch ID Hose Clamps,For Motorcycle Kawasaki Kohler Briggs Stratton Small Engines,Boat Marine Outboard Gas Diesel Petrol
  • The Package Includes:1×5 Feet(1.5m) 1/4" 6mm ID fuel line,6 × 2/5" ID 65 Manganese steel spring hose clamps,The dimensions of the two parts are compatible with each other,You can use them directly without additional purchases.
  • Wall thickness is 3mm:Contains 3 layers of material:1.The outer layer is Chloroprene rubber with good elasticity;2.The middle layer is Nylon Braided,Which increases the working pressure (300PSI / 2MPa) and the maximum burst pressure (1200psi / 8MPa);3.The inner layer is NBR,which can increase oil resistance,acid and alkali resistance,and resist various corrosive liquids.The thickened tube makes you feel at ease, No worries about leakage.
  • Our fuel line's main material is: NBR (copolymer of butadiene and acrylonitrile),Which makes our fuel line more resistant to high/low temperature (- 30 °C~120 °C) and aging compared with other common fuel lines,It will not crack and its performance ↑ 50%.No matter in extremely cold areas or high temperature desert, It will always accompany your vehicle to arrive the destination safely
  • The service life can be up to 9 years,3 times more than the other ordinary fuel lines,So the fuel line will not leak under any circumstances,And keep good working condition,Don't worry about your vehicle,No matter what questions you have, We will always support you
  • For use in motorcycle mowers tractors snow blowers dirt bikes and all small engines,Use hose and clamps, transfer of petroleum products fuel lines for small engines

Last update on 2021-07-22 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 12Mm Id Fuel Hose for our consumer to review. The reports above show ratings of the best overal, best cheap 12Mm Id Fuel Hose to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.