The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 12 Hitch Riser of 2020 – Consumer Guide & Reviews

Rank No. #1
NevSTP Trailer Hitch Towing Extension Adapter, 2-inch Receiver Trailer Hitch Extension Riser with 4-inch Rise/Drop, Dual Hitch Receiver Adapter Extender for Towing & Riser for Bicycle Rack (Black)
  • ➤➤➤【Size & Capacity】 : Fit All 2 inch square receivers hitch tube, 12 inch overall length(with trailer hitch lock).4 inch drop or rise can be turned up or down to level the towing system. Capacity: 350 lb. Tongue, 3,500 lb. towing. Heavy duty for towing trailer, boat, camper, bike rack, cargo carrier, etc.
  • ➤➤➤【Adjustable Length】: 2 pin holes design makes this adjustable trailer hitch have 2 active length and avoid interfere with the vehicle bumper.
  • ➤➤➤【High Quality & Corrosion Resistant】: Made of heavy-duty high-carbon steel, the interface is specially welded, and high quality hardware fittings prevent breakage and have a longer service life. Made of high grade steel with a durable black powder coat finish, super corrosion resistant.
  • ➤➤➤【Special Use】: The Lower receiver is used for towing, top receiver used for accessories. Converts Class I/II hitch to Class III/IV, Offset design to match trailer tongue height, Includes two length adjustment holes. Simple Installation, Professional Installation is strongly recommended
  • ➤➤➤【Warranty & Service】: We provide a one-year quality warranty and technical service. If you have any questions, you can contact us at any time, and we will guarantee you a reply within 24 hours.
Rank No. #2
HiTow Dual Hitch Receiver Extension Adapter Trailer Towing Extender (GTW 4,000 lbs)
  • Fit All 2 inch square receivers hitch tube, 15 inch length , use 5/8" hitch pin or lock (NOT INCLUDE)
  • Gross/tongue capacity: 4000 lbs/400 lbs, 7 inches center rise, 10 inches extension from receiver pin hole. The bottom and top receiver are both 2" extension
  • The Lower receiver is used for towing, top receiver used for accessories only such as a bicycle rack or cargo tray while towing your trailer or camper without scraping anything in your setup
  • Finished in black power coating provide durable and strong conditions, resist dust and corrosion, adds extra durability, Recommend used with an anti-rattle kit
  • Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this adjustable trailer hitch more durable
Rank No. #3
Goplus 12" Hitch Extension Receiver 2" Extender 5/8" Pin Hole 500 LBS Capacity New (12")
  • Distance From Pin Hole To Pin Hole: 12"
  • Receiver: 2"
  • Pin hole: 5/8"
  • Load capacity: 500 LBS MAX
  • Carbon steel(500mm x 500mm square tube and 650mm x 650mm square tube)
Rank No. #4
Drop Hitch by Geny 525 16,000 Lb 10" Drop Raise Hitch 2" Receiver Hitch, Dual-ball Pintle Combo Hitch, Black, 16 x 12 x 4 inches
  • 2" solid shank,Class IV & V,10" DROP OR RAISE
  • 16,000 LB TOWING
  • Dual BALL AND PINTLE RING,TOWING
  • HEAT TREATED BALL MOUNTS,FOR MORE LONGGEVITY & DURABILITY
  • Compatible with All 2″ Attachments Call for Special Colors or Custom Sizes
Rank No. #5
HITOWMFG Dual Receiver Extender Trailer Towing Hitch Extension(GTW 5,000 lbs)
  • Please check the size carefully before buy this; Fit All 2 inch square receivers hitch tube, 14.5" inch overall length(longer than usual to avoid the interference, use 5/8" hitch pin or lock (NOT INCLUDE)
  • Gross/tongue capacity: 5000 lbs/500 lbs, 6-1/2" height difference between bottom and top receiver pin holes, 9-1/2 inch extension from hitch to bottom receiver pin hole
  • The Lower receiver is used for towing, top receiver used for accessories only such as a bicycle rack or cargo tray while towing your trailer or camper without scraping anything in your setup
  • Finished in black power coating provide durable and strong conditions, resist dust and corrosion, adds extra durability, can be used with an anti-rattle kit
  • Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this adjustable trailer hitch more durable
Rank No. #6
CURT 45230 Dual Length Trailer Hitch Ball Mount, 8-1/8-Inch or 11-1/8-Inch Length, Fits 2-Inch Receiver, 7,500 lbs, 1-Inch Hole, 4-Inch Drop, 2-In Rise
  • VERSATILE USE. This dual-length trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The shank has two holes allowing you to move the coupling point for added clearance as needed
  • DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and is rated to tow up to 7,500 pounds gross trailer weight and 750 pounds tongue weight (limited to lowest-rated towing component)
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-inch hole to accept a trailer hitch ball with a 1-inch diameter shank (trailer ball sold separately)
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats
  • EASY TO INSTALL. To install this two-length hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately)
Rank No. #7
Towever 84122 Receiver Hitch Extender with 4" Drop/Rise, 9" Extension, Hitch Riser Solid Tube (GTW/TW 5000/500 LBS)
  • Please check the size carefully before buy this hitch extension rise/drop; Fit All 2 inch square receivers hitch tube, (less than 6" horizontal from hitch to bumper and 10-13“ to ground are recommended
  • 2in trailer hitch extension rise for class 3 or 4 hitch receiver
  • Features a 4.25inch drop rise to accommodate vehicles that are too high or too low
  • Solid receiver tube, Gross/tongue capacity: 5000 lbs/500 lbs, Heavy duty for towing trailer, boat, camper
  • Easy installation by using universal 5/8 hitch pin/locker( not included)
SaleRank No. #8
CURT 45090 Class 3 Trailer Hitch Ball Mount, Fits 2-Inch Receiver, 5,000 lbs, 1-Inch Hole, 8-Inch Drop
  • DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and is rated to tow up to 5,000 pounds gross trailer weight and 500 pounds tongue weight in the drop position (rise position: 3,500 lbs. GTW, 350 lbs. TW)
  • VERSATILE USE. This trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The ball mount also has a 8-inch drop and 6-inch rise to promote level towing
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-inch hole to accept a trailer hitch ball with a 1-inch diameter shank (trailer ball sold separately)
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats
  • EASY TO INSTALL. To install this class 3 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank in place with a hitch pin (sold separately)
Rank No. #9
Towever 84122 Receiver Hitch Extender with 4" Drop/Rise, 9" Extension, Hitch Riser Solid Tube (GTW/TW 5000/500 LBS) with Pin and Clip
  • Please check the size carefully before buy this hitch extension rise/drop; Fit All 2 inch square receivers hitch tube, (less than 6" horizontal from hitch to bumper and 10-13“ to ground are recommended
  • 2in trailer hitch extension rise for class 3 or 4 hitch receiver
  • Features a 4.25inch drop rise to accommodate vehicles that are too high or too low
  • Solid receiver tube, Gross/tongue capacity: 5000 lbs/500 lbs, Heavy duty for towing trailer, boat, camper
  • Easy installation by using universal 5/8 hitch pin/locker(5/8 hitch pin and clip included)
Rank No. #10
Dual Receiver Drop Hitch 2" Class IV 10K Dual Towing Hitch, 5- Adjustment Positions, Includes Two 5/8" Hitch pins (10" Drop)
  • 2″ receiver 10,000 LB Towing Capacity 1,500 LB Tongue Weight
  • Drop/Raise 10“ Fabricated with Heavy Duty Steel
  • Works with Weight Distribution System (GH-302)
  • Sand Blasted and Coated with a Durable Silver-Vein Powder Coat
  • Compatible with All 2″ Attachments Call for Special Colors or Custom Sizes
Rank No. #11
MaxxHaul 70070 Dual Hitch Extension - 4000 lbs. GTW Capacity , Black , Size: 2 inch
  • Receiver size: 2 inch , Towing Capacity -4000 pounds
  • Maximum gross trailer weight: 4000 pounds
  • Maximum tongue weight: 400 pounds
  • Note: Top receiver for accessories only
  • Note: Top receiver not for towing
SaleRank No. #12
MaxxHaul 70067 8-Position Adjustable Ball Mount - 5000 lbs. GTW Capacity , Black
  • Fit standard 2" x 2" Class III and IV hitch receivers; Features universal 1" ball shaft hole
  • Adjustable drop at 5", 6-1/2", 8" and 9-1/2"; Adjustable rise at 3-3/4", 5-1/4", 6-3/4" and 8-1/4"; Provides maximum flexibility when adjusting tow height.
  • 5000-Pounds Maximum Gross Trailer Weight Capacity; Manufactured and tested to meet SAE standards
  • Heavy duty black powder coat finish to resist rust and corrosion
  • Shank Length - 10-3/4 inches
SaleRank No. #14
CURT 45900 Adjustable Trailer Hitch Ball Mount, 2-Inch Receiver, 6-Inch Drop, 2 and 2-5/16-Inch Balls, 14,000 lbs
  • HIGHLY VERSATILE. Adapt your trailer hitch to any towing situation with the highly versatile and easily adjustable design of this adjustable ball mount. The channel-style shank can be flipped to provide up to a 6-inch drop or 5-1/4-inch rise
  • SMOOTH TOWING. For a smoother, quieter ride while towing your trailer, this adjustable drop hitch comes with a built-in anti-rattle feature, deterring vibrations, chucking and rattling at the coupling point
  • POWERFUL BUILD. Constructed from high-strength steel, this adjustable hitch ball mount is ready to work. The 2-inch ball is rated for a capacity of 10,000 lbs., and the 2-5/16-inch ball for 14,000 lbs
  • PRECISE FIT. This adjustable ball hitch comes with a standard shank to fit virtually any standard 2-inch x 2-inch trailer hitch receiver. It's perfect for most class 3, class 4 and class 5 hitches
  • WEATHER-RESISTANT. To protect it against rain, dirt, road grime and salt, this adjustable ball mount is shielded in a durable carbide black powder coat finish, and the dual ball attachment is protected with a corrosion-resistant zinc plating
Rank No. #15
Gen•Y Drop Hitch 2.5" Receiver Class V 32K Towing Hitch, Combo Includes Dual Hitch Ball, Pintle Lock & Two 3/4" Hitch pins (12" Drop 2.5" Receiver)
  • 3" receiver Class V, drop or raise (works with all 2.5" x 2.5" hitch receiver)
  • Includes 2-5/16", 2" ball, pintle lock & 2- 3/4" Hitch pins
  • 3,500 lb tongue weight, 32,000 lb towing (Strongest drop hitch on the market)
  • Lifetime guarantee! Made in the USA! Exceeds SAE-J684 weight testing requirements.
  • Protected with a durable epoxy powder coat
Rank No. #16
GENY 2" Class IV, Drop Hitch & Versa-Ball Drop Hitch Adjustable Drop 12.5" Includes Versa Ball Mount
  • 2″ receiver 10,000 LB Towing Capacity 1,500 LB Tongue Weight
  • Drop/Raise Range: 12.5″ Fabricated with Heavy Duty Steel
  • Works with Weight Distribution System (GH-302)
  • Sand Blasted and Coated with a Durable Silver-Vein Powder Coat
  • Compatible with All 2″ Attachments Call for Special Colors or Custom Sizes
Rank No. #17
CURT 17123 Replacement Weight Distribution Hitch Shank, 2-Inch Receiver, 7-Inch Drop, 10-1/2-Inch Rise
  • Fits 2-inch x 2-inch receiver tube openings with 5/8-inch hitch pin hole, and is compatible with any CURT weight distribution hitch
  • Provides a maximum drop of 7-inch and a maximum rise of 10-1/2-inch
  • Features multiple 3/4-inch diameter holes, spaced 1-1/4-inch from center to center, for adjustable head height
  • Constructed from solid steel for reliable strength and protected by a durable powder coat finish (weight capacity limited to spring bar capacity)
  • Overall dimensions: 13-1/4-inch high x 11-inch long
Rank No. #18
Roadmaster (048-6) Hi-Low Hitch
  • 6" Drop or Riser. Made in USA. Can be turned up or down to level the towing system.
  • Fits 2" receiver hitches.
  • Shank is solid steel designed to insert into a 2" hitch receiver. Not for use with any type of trailer
  • Durable, baked on powder coat finish.
  • 10,000 pound capacity and 400 pound tongue weight rating.
SaleRank No. #19
GEN-Y Hitch Mega-Duty Dual Receiver Hitch: Raise or Drop up to 7.5” – 10,000 Pounds Capacity, 1500 Pounds Tongue Weight, GH-304
  • HEAVY-DUTY: Made with heavy duty steel, sand blasted and coated with a durable silver-vein powder coat. Safely tow heavy loads up to 10,000 lbs.
  • VERSATILITY: Raise or Drop your hitch up to 7.5”. Dual receivers results in options for multiple applications at the same time such as a standard ball mount, luggage rack, motorcycle carrier, cargo rack and more.
  • SAFETY: All GEN-Y products are made right here in the USA, and are rigorously tested and exceed the SAE-J684 Weight Testing Requirements.
  • COMPATIBILITY: Stress-free one pin adjustment with anti-ware pin holes. Compatible with All 2″ Attachments and GH-0100 Stabilizer Kit.
  • LIFETIME GUARANTEE: The 100% satisfaction guarantee is what sets the GEN-Y products apart from the rest.
Rank No. #20
Meyer FHK45054 Receiver Hitch Extension with 4" Drop/Rise, Black
  • Attaches to Class 3 2 receiver hitch
  • Features a 4in. drop rise to accommodate vehicles that are too high or too low
  • Black powder coat finish
  • 1 year warranty

Last update on 2021-04-30 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 12 Hitch Riser for our consumer to review. The reports above show ratings of the best overal, best cheap 12 Hitch Riser to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.