The Voluntary Sector Initiative is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Learn more

Top 10 100 W Stereo1 Audio Amplifier Board Kit of 2020 – Consumer Guide & Reviews

SaleRank No. #1
BT20A Bluetooth 5.0 Stereo Audio 2 Channel Amplifier Receiver Mini Hi-Fi Class D Integrated Amp 2.0 CH for Home Speakers 100W x 2 with Bass and Treble Control TPA3116 (with Power Supply)
  • Small simple compact design but practical and powerful, little Hi-Fi Bluetooth wireless amplifier exclusively designed for the customers who pursue HiFi sound;
  • Bluetooth 5.0 core, up to 50ft connection range guarantees low signal delay. No pop, no audible noise when Bluetooth connection is established;
  • 100W RMS X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), comes with 24V power supply, can drive 280watts(8 ohm), 320watts(4 ohm) speakers, (For passive speakers only, not the powered speakers.)
  • Advanced circuitry design, built-in speakers protection circuit, best for bookshelf/computer/desktop/speakers in your home;
  • Home integrated digital amplifier, 18-month warranty, you can return the item if you have any problems;
SaleRank No. #2
DAMGOO Bluetooth 5.0 Amplifier Board,100w Audio Amp Board Dual Channel DC8-24V,Easy Installation and Password Free Connect to Phone Quietly
  • CHIP: TPA3116D2 (with AM interference suppression function), 50W*2 output power With filter
  • WIDE INPUT VOLTAGE: DC 5V-27V, Can Be Powered by 9V/12V/15V/18V/24V
  • TWO AUDIO INPUT WAYS:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the Headphone (Line in) Way
  • PROTECTIVE FUNCTION:This BT Amp Is Designed with Protective Case, Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection
  • Tip: adequate output power is required when the audio input is sufficient and the power supply voltage/current is sufficient, the relative power will be higher. Different impedance horns will have different output power.In the case of sufficient voltage and current, the larger the impedance horn, the smaller the relative sound power, please pay attention!
Rank No. #3
200W Bluetooth Amplifier Board TPA3116,DAMGOO 100W+100W Audio Amp Board with LC Filter Technique,Dual Channel DC8-24V,Password Free Connect to Phone Quietly
  • CHIP: TPA3116with AM interference suppression function, 100w+100w output power, wide voltage input: 5V-27V,Can Be Powered by 9V/12V/15V/18V/24V. Adapter speaker 4-8Ω (50w-300w)
  • Two Audio Iput Ways:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the Headphone (Line in) Way
  • Easy Installation and Short Start-up Sound: The illustration of each interface is printed on the protective plate, making it easy to install even without instructions. The sound of the amp board to start and connect to Bluetooth is short rather than not a woman's voice.
  • Protective Function:This BT Amp Is Designed with Protective Case, Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection
  • Note: Please use a power adapter with sufficient power to connect the amp board, otherwise the sound will be distorted. And make sure the AMP board is away from the wifi signal.
Rank No. #4
Nobsound 100W Mini Bluetooth 5.0 Power Amplifier Hi-Fi Stereo Class D Audio Amp 2.0 Channel Wireless Receiver Lossless Music Player TF USB Home Speaker (Black)
  • As a digital power amplifier & music player, it supports RCA/AUX/USB/BT 5.0/TF Card inputs, almost compatible with all home audio device such as phone, tablet, computer, TV, set-box, CD player etc. U-disk and TF card support WAV, APE, FLAC lossless formats .
  • USB interface supports U-disk, computers (no need for driver) and phones (with OTG function) input. Bluetooth 5.0 achieves stable and faster transmission speed, TF card makes it convenient to enjoy high-quality music even on the road or outdoor.
  • Adopting classic TPA3116 chip, max output power can reach 50W*2, enough for most home desktop/bookshelf/indoor passive speakers(4-16Ω). The sound is clear and clean without any audible noise even at high output.
  • Compact design and exquisite appearance, attractive chassis with LED display and power / mode switch, very suitable for home and desktop audio system use. DC 9-24V wide voltage makes it possible to be used in car or motorcycle.
  • Comes with complete accessories including high-quality 19V power supply, USB cable(with shielding ring), 1:2 and 2:2 RCA cable, 3.5mm AUX cable, no need to wait and enjoy its powerful function at once as long as you receive it.
Rank No. #5
ELEGOO Mega R3 Project The Most Complete Ultimate Starter Kit w/ TUTORIAL Compatible with Arduino IDE
  • The MEGA complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE
  • Free pdf tutorial in the cd (more than 35 lessons)
  • Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself)
  • Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, IC, buttons, diodes, etc.
  • We have always cared about the customer experience and improve the product function details
Rank No. #6
Facmogu F900 2 CH Bluetooth Amplifier 100W with Power Supply Adapter DC 12V 5A, 50W + 50W BT 5.0 Mini Wireless Audio Power AMP for Home HiFi Stereo Speaker
  • 50W+50W DUAL CHANNEL: F900 bluetooth receiver amplifier provides 50W+50W dual channel stereo output with the upgraded chip TPA3116. Impedance: 4~8 Ohm.
  • THREE INPUT OPTIONAL: Supporting AUX/ USB/ Bluetooth input. But the amp module can be searched and connected via Bluetooth when unplugging audio input line. Insert audio input line, then it will auto switch to wired input mode, Bluetooth function will be lost.
  • SUPER COMPATIBILITY: Our Bluetooth audio transmitter can be widely applied to various tablet PC, TV, smartphone, Laptop with Bluetooth and etc, versatile and simple to use. But it does not apply to a range of products launched by Amazon such as Echo, Alexa ect. and Bose Speakers.
  • MINI ELEGANT SIZE BUT POWERFUL: Ultra small size (3*2.7*1.5 inch) with metallic colourful shell, advanced technology and chip, our Bluetooth stereo amplifier has good sound quality, no distortion, no humming or hissing and sounds clear, crisp.
  • 1-YEAR WARRANTY: We offer 1-year guarantee period. If you have any questions or concerns, please don't hesitate to contact us. 【Regarding the power-on sound of the amplifier, we cannot change the program at present, please forgive me.】
Rank No. #7
DAMGOO Bluetooth Amplifier Board, 100W+100W Peak Output Power, 2.0 Channel DC:8-24V, Password Free Connect, BT 5.0 AMP Board for DIY Wireless Speakers Board
  • Output Power: 100w+100w Output Power, Wide Voltage Input: 5V-24V, Can Be Powered by 9V/12V/15V/19V/24V. Adapter speaker 4-8Ω (50w-150w)
  • Bluetooth 5.0: User Can Directly Connect with Wireless Bluetooth 5.0 without Password
  • Easy Installation and Short Start-up Sound: The Illustration Of Each Interface Is Printed On The Protective Plate, Making It Easy To Install Even Without Instructions. The Sound of The Amp Board To Start And Connect To Bluetooth Is Short Rather Than Not a Asian Woman's voice.
  • Protective Function:This BT Amp Is Designed with Protective Case, Over-heat Protection, Short-circuit Protection
  • Note: Please Use A Power Adapter With Sufficient Power To Connect The Amp Board, Otherwise The Sound Will Be Distorted. And Make Sure The AMP Board Is Away From The Wifi Signal.
SaleRank No. #8
Bluetooth HiFi Mini Audio Amplifier - Class D Digital Desktop PC Stereo Amplifier Receiver (2 x 100 Watt MAX) Aluminum Diecast- Pyle PDA20BT
  • DESKTOP AUDIO AMPLIFIER: Take control of your sound with hi-powered, mini-style component stereo amplifier performance - enjoy wireless streaming ability with the Mini Blue Series Home Amplifiers
  • COMPACT SOUND CONTROL: Multi-channel amplifier design paired with convenient audio configuration unlocks home theater stereo system ability right on your computer desktop - gain access to digital sound control with compact amplifier receiver power
  • BLUETOOTH STREAMING RECEIVER: Simple & hassle-free Bluetooth amplifier pairing allows you to connect and play your music to connected speakers and radio systems
  • 2x100 WATT POWER: The 2 Channel Pyle Bluetooth Stereo Amplifier Receiver is perfect for your karaoke and home theater acoustic sound system. Gives you 200W power w/ 100W RMS, accommodates 2 sets of speakers, lets you enjoy high quality amplified audio
  • VERSATILE MINI COMPONENT AMPLIFIER: Connect to external devices like radios, speakers and microphones - or use the 1/4’’ headphone jack for private listening from your home PC desk - features rear panel quick connect push-type speaker terminals
SaleRank No. #9
DAMGOO 50W+50W+100W 2.1 Channel Subwoofer Amplifier Board with Treble and Bass Control, Dual TPA3116 Chip, DC 12-24V, Bluetooth and AUX Inputs, DIY Wireless Speakers AMP Board, Password Free
  • TPA3116D2 HIFI Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, THD ≤0.1%. Wide Voltage Input DC: 12-24V;
  • Treble & Bass Control: If You Are Tired of The Inherent High& Low Bass, Why Not Try The High & Low Control Knob! This Will Make You Feel Like Being In A Movie Theater.;
  • Bluetooth and AUX Function: Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have Bluetooth, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug.;
  • Safety Protection: This Amp Board Has Overheat Protection, Reverse protection, Circuit Protection, Over-voltage and Under-voltage Protection;
  • 7 * 24 Hours After-sales Service: Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer.
Rank No. #10
2 Channel Stereo Audio Amplifier Receiver Mini Hi-Fi Class D Integrated Amp 2.0CH for Home Speakers 100W x 2 with Bass and Treble Control TPA3116(with Power Supply) - Fosi Audio TB10A
  • Note: Please choose the Fosi Audio store to place the order. Perfectly suited for your desktop or a smaller space in your home or office, digital amplifier is easy to connect to your audio system with no software to install or settings to change;
  • 100W MAX Power Output X 2(4 ohms, 20 Hz - 20 kHz, 0.04% THD), comes with 24V power supply, can drive 200watts(8 ohm), 300watts(4 ohm) speakers;
  • Simple compact design but practical and powerful; No pop, no audible noise, dead silent when nothing is playing through it;
  • Home small hi-fi integrated amplifier, Sturdy, Lightweight, Aluminum enclosed amp makes it perfect for projects and DIY;
  • What You Get: TB10A amplifier x1, power adapter x1, AC cord x1, user manual x1, 18-Month global warranty, and 24-Hour quick customer service.
Rank No. #11
2 Channel Bluetooth 5.0 Power Amplifier 100W Class D Hi-Fi Stereo Audio Mini Amp Wireless Receiver Home Theater Treble Bass Control Douk Audio G3 (Black)
  • Bluetooth 5.0 can ensure more stable and faster wireless transmission with less losses. It can turn your normal passive speakers to Bluetooth speakers.
  • Besides BT 5.0, this device also support standard 3.5mm AUX input. This amp can be connected with mobile phone, notebook, PC, PSP, CD and so on.
  • Classic TPA3116 amplifier chip & 3 x TL072 independent OP amps. It can offer 100W (50Wx2), which suits 3~6 inches 2.0CH speakers. Sound is very powerful and clean. Totally no background noise and pop.
  • Unlike other similar TPA3116 amplifiers, this one has no power sparks issue. It also has built-in protective circuit to avoid damage to your speakers. Higher quality with lower price.
  • More features: Independent treble & bass tone control. High quality 19V 4.74A power supply. Prompt and courteous customer service. For any questions, please contact us on Amazon.
Rank No. #12
Echo Link Amp - Stream and amplify hi-fi music to your speakers
  • Upgrade your speakers with a built-in 60W x 2-channel amplifier, high-fidelity streaming music, and Alexa.
  • Voice control music selection and playback with your compatible Echo device or the Alexa app.
  • Connect Echo Link Amp to speakers and group with other supported Echo devices to play music throughout your home.
  • Supports hi-fidelity audio from streaming services like Amazon Music HD.
  • Multiple digital and analog inputs and outputs provide compatibility with your existing stereo equipment.
Rank No. #13
Bluetooth Amplifier Board 2.1 2X50W+100W 12V-24V Audio Power Amplifier Module Bass and Treble Control for Store Home Theater Speakers with Antenna
  • [2-in-1] High quality power amplifier board. With AUX and Bluetooth two audio input methods, 2-in-1. 5.0 Bluetooth version, the transmission efficiency is higher, the transmission distance is farther
  • [High Performance] Bluetooth audio amplifier module 2.1 channel, Max output power 2X50W+100W. With antenna and antenna base, the signal is better, the efficiency is high, and the anti-interference ability is strong
  • [Protection Mechanism] With short-circuit protection as well as overcurrent, overheating, and anti reverse connection protection to prevent total failure. In the event of an overload, the device reports the fault condition to the processor to protect itself from damage
  • [High Quality] It adopts copper DC connector and fence type terminal. It can withstand large current, no heat, no damage to the wire. Free DC head lead, compatible with the input power interface of this product, even if you don't have a DC head adapter or battery, it can be easily wired
  • [Application] With bass, treble, subwoofer frequency and volume control, easy to adjust volume, enjoy the music tone what you want. Widely used in store solicitation, home theater, square speakers, etc
SaleRank No. #14
Home Bluetooth Audio Power Amplifier 2X120 Watt - Portable 2 Channel Surround Sound Stereo Receiver w/ USB - Amplified Subwoofer Speaker, CD DVD, MP3, iPhone, Phone, Theater, PA System - Pyle PTAU45
  • 2X120 WATT POWER: The Pyle Dual Channel Audio Amplifier is perfect for your PA & home theater acoustic surround sound system. Gives you 2x120 watts power which can be used for multi speakers w/ 4 8 ohms impedance, enjoy high quality music & movies
  • MULTIPLE INPUTS: This personal portable digital amp box supports various external sources 3 3.5mm AUX for tuner, CD DVD, MP3, computer, iPad, iPhone & cell phone, 1/4" mic in & 1/4" headphone jack input. Also features a REC RCA output for recording
  • PAGER/MIXING MODE: The professional integrated stereo receiver features pager & mixing switch. In pager mode, the signal from the microphone will override to auto talkover, use for hosting & meetings. Switch to mixing mode for a fun karaoke session. Dimensions (W x H x D): 8.2x 6.6x 2.8 inches
  • USB 2.0 INPUT: It features a USB input to support flash drives or similar USB devices w/ LED indicator beside the port. It allows you to play your favorite audio files from your computer's media library when you connect it directly to the amplifier. Rated power input 750mV
  • EQ CONTROLS: The improved compact bookshelf sound amplifier features crisp & responsive buttons for power switch, MP3 controls previous, next, play/pause & rotary knob controls for input select, MIC, master, balance, bass & treble volume controls
Rank No. #15
Home Audio Power Amplifier System - 2X120W Mini Dual Channel Mixer Sound Stereo Receiver Box w/ RCA, AUX, Mic Input - For Amplified Speakers, PA, CD Player, Theater, Studio Use - Pyle PTA4 Black
  • 2X120 WATT POWER: The Pyle Dual Channel Stereo Amplifier is perfect for your PA and home theater acoustic sound system. Gives you 2x120W power which can be used for multi speakers w/ 4 ohm impedance, enjoy high quality amplified audio
  • 4 INPUTS: This personal digital amp box supports various external sources 3 pairs RCA audio input for tuner, CD player, tape deck, camcorder or VCR, 1/4" microphone IN, 1/4" headphone jack input. Also features a REC output for recording
  • PAGER/MIXING MODE: The mini integrated indoor AV receiver features pager and mixing switch. In pager mode, the signal from the microphone will override to auto talkover, use for hosting and meetings. Switch to mixing mode for a fun karaoke session
  • PUSH TYPE SPEAKER TERMINAL: The sound amplifying mixer device lets you easily connect speaker wires directly to the amplifier. The total speaker impedance must be at least 4 Ohm per channel at stereo mode
  • EQ CONTROLS: The improved professional compact bookshelf sound amplifier features crisp and responsive button for power switch and rotary knob controls for mic volume, balance, bass, treble, master volume, and input source
Rank No. #16
REXQualis Super Starter Kit based on Arduino UNO R3 with Tutorial and Controller Board Compatible with Arduino IDE
  • The most economical kit comes with everything compatible with Arduino to starting programming for beginners .
  • This is the upgraded starter kits come with a 9V 1A Power Adapter (At least $5.99 on amazon) to replace a 9V Battery , and the Lcd1602 module come with pin header(not need to be soldered by yourself).
  • Include High Quality Base Board base on Arduino UNO R3 compatible with Arduino IED and Sensors, Servo, Motor, ULN2003 driver board, lcds, etc.
  • Free PDF Tutorial and Datasheet are available to download from our official website or you can contact our customer service.
  • All of the Components and Integrated Circuits are individually packaged and labeled, and packing in a plastic box which is bigger enough for you.
SaleRank No. #17
Home Audio Power Amplifier System 2X40W Mini Dual Channel Sound Stereo Receiver Box w/ LED For Amplified Speakers, CD Player, Theater via 3.5mm RCA for Studio, Home Use Pyle PCA2 Black
  • 2x40 WATT Power: The Pyle dual channel audio amplifier is perfect for your home theater acoustic sound system; Gives you 2x40 watts peak power which can be used for speakers w/ 4 8 ohms impedance, enjoy high quality music and movies
  • Multiple Sources: This small personal portable digital amp box lets you connect external audio sources such as a tuner, CD DVD player, tape deck, camcorder, VCR to the RCA (L/R) line input and enjoy enhanced amplified acoustic audio reproduction
  • Led Indicator: The mini professional Integrated stereo receiver features LED indicator light above the power switch to indicate power is turned ON; The unit also offers built in short circuit and power surge protection for safe usage
  • Push type Speaker Terminal: It lets you easily connect speaker wires directly to the amplifier; The speaker impedance ranges from 4 to 8 Ohms for the general stereo output; The total speaker impedance must be at least 4 Ohm per channel at stereo mode
  • EQ Controls: The improved indoor smart compact bookshelf speaker sound amplifier Ffatures crisp and responsive buttons for the power switch; It also features rotary knob controls for the master volume, bass, treble adjustments
Rank No. #18
Bluetooth Subwoofer Audio Amplifier Board 50W+50W+100W with Treble and Bass Control, Bluetooth and AUX Inputs, BT 5.0 Stereo AMP Board for DIY Speakers Board, Password Free
  • ▶【Subwoofer Audio Amplifier Board】 50W+50W+100W Bluetooth 5.0 wireless connection, Bluetooth+AUX audio input, 2.1 channel stereo output, just a little sound distortion. Note: When using AUX mode, please confirm that the Bluetooth connection of this module has been disconnected.
  • ▶【Treble and Bass Adjustment】 This digital Amp board with independent treble and bass adjustment buttons,you can directly adjust the treble and bass through the module, without using the player or speaker.
  • ▶【Perfect Sound Quality Experience】 The audio power subwoofer amplifier module with powerful chip, AM interference suppression function, shielding power inductance, low noise front stage operational amplifier, let you enjoy a more perfect sound quality experience.
  • ▶【With Protective Function】 This Bluetooth Amp module is designed with over-voltage protection, under-voltage protection, over-heat protection, short-circuit protection, with case to protective it.
  • ▶【Easy Installation and Use】 The illustration of each interface is printed on the protective plate, making it easy to install and use even without instructions. Small size: 4.72in*3.94in*0.7in, easy to carry.
Rank No. #19
Clyxgs TPA3116D2 2.1 Digital Power Amplifier Board, 2x80W+100W(Bass) Audio Stereo AMP Module for Audio System DIY Speakers 12-26V
  • ✅ Two TPA3116D2 chips – one for the left/ right channel power amplify and the second is in bridge connection with the front NE5532 to drive the subwoofer.
  • ✅ DC 12-26V(24V recommended) wide input voltage; 3.5mm audio input jack; 3-pin audio input jack; Volume/ Subwoofer/ Stereo knob adjustment.
  • ✅ 80W*2+100W 2.1 channels (left+right+subwoofer), high efficiency and low heat.
  • ✅ 3.5 mm audio jack, 2.1 mm DC power jack and phoenix speaker connectors for easy hookup, an optional 3-pin connector for internal line-in audio is available (wiring harnesses not included).
  • ✅ Widely used in DIY bookshelf loudspeaker, car audio components, home theater audio system and more.
Rank No. #20
Audio Amplifier Board, DROK 5W+5W Mini Amplifier Board PAM8406 DC 5V Digital Stereo Power Amp 2.0 Dual Channel Class D Amplify Module for Speaker Sound System DIY
  • Parameters: DROK audio amplifier board working voltage is DC 5V, output power is 5W (2Ω 5V)/3W (4Ω 5V) / 1.8W (8Ω 5V). Input method is monaural input.
  • Artificial Material: this New-designed mini power amplifier is made of noble black immersion gold circuit board, imported KEMET speaker capacitor, large-capacity filter capacitor for channels. Besides, we customized black copper terminal blocks and gold-plated audio input terminal blocks for this new amplifier module.
  • High Performance: the digital amplifier module is with high efficiency of over 90%, general harmonic distortion noise is less than 10%, low quiescent current and noise suppression.
  • Safe Protection: the class D dual-channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection; what's more, EMI is allowed to pass.
  • Additional Function: it is available to connect amplifier type to choose different function (MODE: high electricity level is Type D, low electricity level is Type AB. Factory defaults high electricity level); available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory default high electricity level.

Last update on 2021-07-29 / Affiliate links / Images from Amazon Product Advertising API

We’ve made a buying guide of top 10 100 W Stereo1 Audio Amplifier Board Kit for our consumer to review. The reports above show ratings of the best overal, best cheap 100 W Stereo1 Audio Amplifier Board Kit to buy in 2020.

If you think there is mislead information on any products and services, feel free to contact our experts at any time.